Xmotorstore Payments
Malossi front shock absorber RS24/10-R for Italjet Dragster 4620012
Malossi code: 4620012
Malossi front shock absorber RS24/10-R for Italjet Dragster wheelbase 270 mm.
Rs24 front Malossi shock absorber, 270 mm wheelbase for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-double regulation of the hydraulic system in compression (separate for low and high speed);
-spring preload to adapt the vehicle's running position.
Technical features
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank.
-Use: racing scooter.
-Shock absorber rod Ø 14 mm in hardened and tempered 38 NiCrMo4UNI 7845 steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60).
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension.
-New lamellar system in harmonic steel which allows for very precise calibration.
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound).
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB).
- Scraper ring in SEALTHANE grade 9345 polyester resin.
-Micrometic adjustment of spring pre-load via ring nuts.
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions.
-Double adjustment of the hydraulic compression braking, pre-selectable to approximately 10 positions each, separate for low and high speed.
-Special oil with low viscosity and practically insensitive to temperature variations.
-External compensation tank which allows an increase in the quantity of internal fluids.
- Wheelbase: rear 275 mm - front 270 mm.
-Stroke: rear 27.5 mm - front 23 mm.
Malossi shock absorber for:
Malossi shock absorber for Italjet Dragster 125 ie 4T LC euro 5 2021-> (JC1P58MI-3).
Malossi shock absorber for Italjet Dragster 200 4T LC euro 5 2021-> (JC1P63ML-4B).
Malossi shock absorber for Italjet Dragster 300 ie 4T LC euro 5 2024-> (AZCR).
Reference: 144.080.003
Brand: POLINI
Crankshaft for Polini and minicross minimotard, suitable for use with IDM flywheel. Code 144.080.003
Reference: 203.0011
Brand: POLINI
Polini air filter for Peugeot 103. Polini code: 203.0011. Filter attachment size 46mm
Reference: TCM3789
Brand: Tecnominimoto
TCM 50cc H2O 5-port cylinder kit compatible with TCM and BZM engines. Complete Made in Italy thermal group for high performance and maximum reliability.
Reference: 267209904
Brand: Wrapper
Light pink wrapping can. Removable paint can. Wrapper light pink 400 ml. Wrapping in spray can, perfect for rims and tuning. How does the wrapping paint work? It is applied like a normal varnish, once dry it will become like a wrapping film, with the possibility of removing it at any time. CODE: 267209904 EAN: 5907547716751 SUPPLIER CODE: 400WRAPPER3015
Reference: 03.ST.0006.L
Brand: Ohvale
Ohvale Gp-2 Half-Handlebar. Ohvale Code: 03.ST.0006.L Specific half-handlebar for Gp-2, and original Ohvale Gp-0 EVO. Ohvale half-handlebar application 03.ST.0006.L: Gp-2 Half-Handlebar. Gp-0 EVO Half-Handlebar.
Reference: 3112985
Brand: Malossi
Malossi MHR REPLICA cylinder kit diameter 50 in aluminum H2O Malossi code: 3112985 Malossi cylinder kit for APRILIA RS 50 2T LC euro 2 2006 and later (DERBI D50B1). Malossi cylinder kit for APRILIA RS 50 2T LC euro 4 2018 and later (D50B0). Malossi cylinder kit for APRILIA RS4 50 2T LC euro 2 (DERBI). Malossi cylinder kit for APRILIA RX 50 2T LC from 2007...
Reference: 206.0040
Brand: POLINI
Polini segment diameter 41x1.5 mm Polini segment for: Piaggio, Piaggio Bravo, Piaggio Cba, Piaggio Ciao, Piaggio Eco, Piaggio Si, Polini, Gilera, Gilera Cba
Reference: 4419169
Brand: Malossi
Malossi 4419169 MT9B-4 Gel battery Malossi code: 4419169. Technical features: -Technology: Gel -Ready to use, requires no maintenance -Factory activated (VRLA) -Waterproof -Multi-position mounting -Sulfation of the plate reduced to a minimum -Suitable for cold climates -No contact with acids -Longer durability -Complies with the 2021 European regulation...
Reference: 3219492
Brand: Malossi
Malossi Moped racing exhaust mhr 3219492 Code: 3219492 The Moped Racing muffler is one of the essential components for the development of a vehicle and has been specifically designed to give the engine an increase in power at medium and high revs. It has a profile that allows it to be mounted on ALL Ciao, Bravo, Si, Grillo mopeds and is sized to be...
Reference: EK520MRD7118
Brand: EK (Enuma Chain)
Motocross chain size 520 model EK520MRD7118. EK 520MRD7118 MRD7 series 118 link chain with 520 pitch suitable for motorcycles with a maximum displacement of: 500 4T cc combined with SKJ joint (Clip joint).
Reference: 5316871
Brand: Malossi
Malossi complete connecting rod 5316871 Malossi code: 5316871 Malossi complete connecting rod with 85 mm axle distance and 12 mm diameter pin.
Reference: 123A
Brand: DM
Minimoto Dm Junior 2025 footpeg supports New Dm footpeg supports for Junior riders. This 2025 update of the Dm minimoto improves the handling of the chassis thanks to the specific foot position for Junior riders.
Reference: 01.SW.0113.L
Brand: Ohvale
Ohvale 160 4S engine oil bypass. Code: 01.SW.0113.L Ohvale 160cc 4-speed engine oil hose, rigid metal tube with gold finish.
Reference: 2911325
Brand: Malossi
Malossi RACING spring set for original scooter and maxi scooter clutches Malossi code: 2911325
Reference: A5006-PACK
Brand: Alfano
4 bracket kit to install 4 A1211 sensors on the kart A5006-PACK. A5006-PACK. Supports IR-Wireless A1211 sensors. This 4 bracket kit allows you to install 4 A1211 sensors on the kart.
Reference: 3332.03
Brand: Domino
Domino Racing throttle with gray knobs 3332.03 Aluminum gas control with gray / black mod A010 knobs open, without gas wire adjuster. Support material: Aluminum Support finish: Painted Black colour Max travel: 66 mm Rapidity: 1.5 ° / mm Cable Type: Single cable
Malossi front shock absorber RS24/10-R for Italjet Dragster 4620012
Malossi code: 4620012
Malossi front shock absorber RS24/10-R for Italjet Dragster wheelbase 270 mm.
Rs24 front Malossi shock absorber, 270 mm wheelbase for 10" wheel.
The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track:
-adjustment of the hydraulic system in extension to absorb all the roughness of the terrain;
-double regulation of the hydraulic system in compression (separate for low and high speed);
-spring preload to adapt the vehicle's running position.
Technical features
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank.
-Use: racing scooter.
-Shock absorber rod Ø 14 mm in hardened and tempered 38 NiCrMo4UNI 7845 steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60).
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension.
-New lamellar system in harmonic steel which allows for very precise calibration.
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound).
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB).
- Scraper ring in SEALTHANE grade 9345 polyester resin.
-Micrometic adjustment of spring pre-load via ring nuts.
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions.
-Double adjustment of the hydraulic compression braking, pre-selectable to approximately 10 positions each, separate for low and high speed.
-Special oil with low viscosity and practically insensitive to temperature variations.
-External compensation tank which allows an increase in the quantity of internal fluids.
- Wheelbase: rear 275 mm - front 270 mm.
-Stroke: rear 27.5 mm - front 23 mm.
