- Reduced price
- New
Xmotorstore Payments
Complete over range transmission unit for Yamaha t-max ie 2004-2011 500cc Yamaha t-max 500 ie 4t lc 2004-2007. Malossi code: 6114885.
Yamaha TMAX 500 ie 4T LC 2004-2007 transmission kit.
Yamaha TMAX 500 ie 4T LC 2008-2011 transmission kit.
The Over Range is also renewed: new variator and new belt!
This new system is based on the new Multivar MHR Next variator, which, combined with the other components, allows you to achieve truly unique performances!
The torque driver (mobile pulley) has a larger diameter than the original and, with its absolutely cutting-edge technological characteristics, allows for a significantly higher transmission ratio excursion compared to the original pulley.
Malossi technicians have taken care of the creation of this pulley down to the smallest detail, using special materials and a particular thermochemical treatment which gives it very high resistance to wear and high mechanical resistance.
In order to fully exploit the range of the new torque corrector unit and the powers currently available on racing vehicles, the new Malossi X K Belt MHR toothed belt has been introduced which ensures maximum performance in all operating conditions.
The OVER RANGE is completed by the fixed half-pulley with diamond processing on the sliding surface of the belt and with a recalculated angle to further increase the shifting range.
Finally, for the complete completion of the OVER RANGE system, the torsion controller is provided.
Complete over range transmission unit for Yamaha t-max ie 2004-2011 500cc Yamaha t-max 500 ie 4t lc 2004-2007. Malossi code: 6114885.
Yamaha TMAX 500 ie 4T LC 2004-2007 transmission kit.
Yamaha TMAX 500 ie 4T LC 2008-2011 transmission kit.
The Over Range is also renewed: new variator and new belt!
This new system is based on the new Multivar MHR Next variator, which, combined with the other components, allows you to achieve truly unique performances!
The torque driver (mobile pulley) has a larger diameter than the original and, with its absolutely cutting-edge technological characteristics, allows for a significantly higher transmission ratio excursion compared to the original pulley.
Malossi technicians have taken care of the creation of this pulley down to the smallest detail, using special materials and a particular thermochemical treatment which gives it very high resistance to wear and high mechanical resistance.
In order to fully exploit the range of the new torque corrector unit and the powers currently available on racing vehicles, the new Malossi X K Belt MHR toothed belt has been introduced which ensures maximum performance in all operating conditions.
The OVER RANGE is completed by the fixed half-pulley with diamond processing on the sliding surface of the belt and with a recalculated angle to further increase the shifting range.
Finally, for the complete completion of the OVER RANGE system, the torsion controller is provided.
Reference: 5114855
Brand: Malossi
Malossi variator multivar 2000 MHR next for Yamaha Tmax 500cc 5114855. Tmax 500 variator compatible with: YAMAHA T MAX 500 ie 4T LC 2004-> 2007 YAMAHA T MAX 500 ie 4T LC 2008-> 2011 Malossi staff has worked to further improve one of its must-have products, the real point of reference for all T-maxists: the legendary Multivar MHR for Yamaha T Max!...
Reference: 6114674
Brand: Malossi
Malossi X K belt for Yamaha T MAX 500 cc 32.2x14.9x892 mm angle 28 Malossi code: 6114674 Malossi belt for YAMAHA T MAX (carb.) 500 4T LC 2001->2003. Malossi belt for YAMAHA T MAX 500 ie 4T LC 2004->2007. Malossi belt for YAMAHA T MAX 500 ie 4T LC 2008->2011.
Reference: 6113806B
Brand: Malossi
Malossi VENTILVAR 2000 half-pulley for Yamaha T MAX 500 cc Malossi code: 6113806B Malossi half-pulley for YAMAHA T MAX (carb.) 500 4T LC 2001-2003. Malossi half-pulley for YAMAHA T MAX 500 ie 4T LC 2004-2007. Malossi half-pulley for YAMAHA T MAX 500 ie 4T LC 2008-2011.
Reference: 6113495
Brand: Malossi
Malossi torque driver Malossi code: 6113495 Malossi torque drivers for YAMAHA T MAX carb 500 4T LC 2001 2003. Malossi torque drivers for YAMAHA T MAX 500 ie 4T LC 2004 2007. Malossi torque drivers for YAMAHA T MAX 500 ie 4T LC 2008 2011.
Reference: 2514227
Brand: Malossi
Variator spring guide Torsion controller Malossi 2514227 Malossi code: 2514227 Malossi Torsion controller variator spring guide for Kymko and Yamaha.
Reference: A4464
Brand: Alfano
Alfano adapters for 40/30 / 25mm kart axle. Alfano Code: A4464. Adapters for 40/30 / 25mm axis with magnetic ring A4461 / A4462
Reference: 178.1001
Brand: POLINI
Polini brake connection screw 8x1 178.1001
Reference: 204.0770/D
Brand: POLINI
Polini piston 47.6 mm selection D (47.575 mm). Polini Code: 204.0770/D
Reference: 140.0065
Brand: POLINI
Polini cylinder kit for Piaggio Ciao diameter 43 mm pin diameter 12 mm. Polini Code: 140.0065
Reference: 3213897
Brand: Malossi
Malossi titanium silencer for GP MHR REPLICA approved exhaust Malossi code: 3213897
Reference: 176.0152
Brand: POLINI
Polini brake shoes for Piaggio (without springs) d.105X20 mm Code 176.0152 Application: Piaggio, Piaggio Bravo, Piaggio Ciao, Piaggio Grillo, Piaggio Si, Piaggio Superbravo, Piaggio Vespino F9, Piaggio Velofax These Piaggio brake pads are compatible as original spare parts.
Reference: 143.270.015
Brand: POLINI
Rubber intake manifold Steel GP3 Polini. Polini code: 143.270.015 Carburetor inlet: 25 mm. Internal connection diameter: 16 mm. Hole spacing: 23.5 37.5 mm.
Reference: WPA610
Brand: CAPIT
Accessory harness for direct feeding of Capit Warmme heated gloves, length 1.3 meters. NOTES: to be used in combination with WPA421 power supply cable
Reference: FB 001
Brand: OMG
Omg petrol filter made in Italy, with 6 mm hose connection.
Reference: 5514779B
Brand: Malossi
Wiring for Energy pump Malossi 5514779B Malossi code: 5514779B
Reference: 6218165
Brand: Malossi
Malossi rear brake pad width 16 Malossi code: 6218165 Malossi brake pad for Italjet Pack 50 2T rear. Malossi brake pad for Piaggio Boss 50 2T rear. Malossi brake pad for Piaggio Boxer 50 2T rear. Malossi brake pad for Piaggio Bravo 50 2T rear. Malossi brake pad for Piaggio Ciao 50 2T rear. Malossi brake pad for Piaggio Ciao PX 50 2T rear. Malossi brake...
Reference: 143.680.001
Brand: POLINI
Revision starter kit Polini minibike. Polini code: 143.680.001
Reference: 143.803.017
Brand: POLINI
Rear fairing Polini 910 s black. Polini code: 143.803.017 Rear fairing for Polini minimoto, model 910 S RS, in black color. Fairing in black plastic material.
Reference: 6215005BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215005BS Malossi brake pads for APRILIA RS 50 2T LC euro 2 2006 (DERBI D50B1) Rear. Malossi brake pads for APRILIA RX 50 2T LC 2007 (DERBI D50B0) Front - Rear. Malossi brake pads for APRILIA SX 50 2T LC 2007 (DERBI D50B0) Front - Rear. Malossi brake pads for BETA EIKON 50 2T LC Front - Rear - for...
Reference: 53 9592
Brand: Malossi
Malossi Rhq crankshaft 53 9592 for Aprilia and Suzuki Malossi code: 53 9592 Malossi Rhq crankshaft with 10 mm diameter pin and 37.3 mm stroke 53 9592.
Reference: 246472216
Brand: Evok
Complete EVOK Iron LED chrome front headlight, WITHOUT Angel Eyes, Plug&Play, for Piaggio SI FL2, product code 246472216. High-brightness 12V LED 6000K with converter included. Not road approved.
Complete over range transmission unit for Yamaha t-max ie 2004-2011 500cc Yamaha t-max 500 ie 4t lc 2004-2007. Malossi code: 6114885.
Yamaha TMAX 500 ie 4T LC 2004-2007 transmission kit.
Yamaha TMAX 500 ie 4T LC 2008-2011 transmission kit.
The Over Range is also renewed: new variator and new belt!
This new system is based on the new Multivar MHR Next variator, which, combined with the other components, allows you to achieve truly unique performances!
The torque driver (mobile pulley) has a larger diameter than the original and, with its absolutely cutting-edge technological characteristics, allows for a significantly higher transmission ratio excursion compared to the original pulley.
Malossi technicians have taken care of the creation of this pulley down to the smallest detail, using special materials and a particular thermochemical treatment which gives it very high resistance to wear and high mechanical resistance.
In order to fully exploit the range of the new torque corrector unit and the powers currently available on racing vehicles, the new Malossi X K Belt MHR toothed belt has been introduced which ensures maximum performance in all operating conditions.
The OVER RANGE is completed by the fixed half-pulley with diamond processing on the sliding surface of the belt and with a recalculated angle to further increase the shifting range.
Finally, for the complete completion of the OVER RANGE system, the torsion controller is provided.