- Reduced price
- New
Xmotorstore Payments
Dellorto venturi for phbg carburetor threaded M32x1.25 external diameter 59mm.
Fitting compatible with PHBG 15, 18, 19, 21.
Dellorto Code: 0981400 82
Reference: X-Filtro
Brand: XRACING
New X-F special racing air filter 100% MADE IN ITALY use: high performance racing universal for: minibike motorbike scooter pitbike brand: Xmotorstore & Marchald Red sponge length: 140mm diameter: 85mm connection diameter: 60/65 mm suitable for venturi. washable X-F was born from the experience gained in years of competitions and from various tests,...
Reference: FB 001
Brand: OMG
Omg petrol filter made in Italy, with 6 mm hose connection.
Reference: 420015
Brand: XRACING
Motorcycle silicone fuel hose for various applications. This petrol hose for carburetor, tank, and other uses, allows maximum curvature without blocking the flow of fuel. These racing fuel hoses are suitable for all vehicles. Fuel pipe size: 1 METER Fuel tube internal diameter: 5.5mm External diameter of fuel pipe: 6mm Available colors: white petrol tube,...
Reference: AC5100-XRacing
Brand: XRACING
Air filter protective sock. An absolute novelty for the protection of the air filter, the mesh fabric sock allows for greater filtering of the aspirated material, guaranteeing clean air for the engine. The filter sock is handmade in Italy, with the highest quality materials. When to use the mesh on the air filter? - The filter protection can be used in...
Reference: 5518988B
Brand: Malossi
Lambda O2 Malossi controller 5518988B emulator Code: 5518988B The use of the new O2 controller allows the management of the carburetion in the area where the Lambda probe controls the title of the fuel-air mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a different value from the stoichiometric...
Reference: 5519567
Brand: Malossi
Malossi Power ignition only for Peugeot mopeds 5519567 Malossi code: 5519567
Reference: 5515735
Brand: Malossi
Lambda emulator TC UNIT O2 Malossi controller 5515735 Code: 5515735 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is constant,...
Reference: 55 8132
Brand: Malossi
Malossi Tc Unit 55 8132 electronic control unit Code: 55 8132 The incessant development of electronics in the motor sector has led Malossi to the creation and marketing of a complete line of electronic control units for road and racing scooters which embody maximum technology. Each control unit model has been expressly studied for the scooter on which it...
Reference: 203.0124
Brand: POLINI
Polini air filter for Aprilia SR 50 2T Factory. Polini code: 203.0124
Reference: 343.0036
Brand: POLINI
Polini Cp 19 Ape 50 cc carburetor filter attachment flange. Polini Code: 343.0036
Reference: 215.0449
Brand: POLINI
Polini 360 degree intake manifold sleeve 31mm. Polini Code: 215.0449
Reference: 02 4026
Brand: Malossi
Malossi intake manifold 34x45 mm inclined rear 02 4026 Code: 02 4026 Rear inclined Malossi intake manifold
Reference: 173.0001
Brand: POLINI
Yamaha T-max 500 injection pressure regulator. YAMAHA: T MAX 500 Injection - T MAX 500 Injection 2008 POLINI PRESSURE REGULATOR KIT FOR YAMAHA TMAX: HYPER PRESSURE Polini has put on the market a pressure regulator for Yamaha TMax capable of increasing the pressure of the original fuel injection system from 2.5 atmospheres (original) to 3.5 atmospheres It...
Reference: 52625-77
Brand: DELLORTO
Dellorto 52625 77 phva gaskets. Dellorto PHVA carburetor gasket kit.
Reference: 223.0120
Brand: POLINI
Intake sleeve Vespa Px Pe 125cc 200cc 2t diameter 34mm length 33mm. Polini code: 223.0120
Reference: 201.1705
Brand: POLINI
Polini Cp 17,5 Evolution carburetor. Polini Code: 201.1705. Polini evolution carburetors are intended for competitions: it is necessary to eliminate the mixer and the vacuum tap. Polini 17,5 evolution carburetor features: Maximum jet 100 Idle jet 38 Needle 14/22 24x40 valve Pulverizer bush d.2,6 Air filter connection 60 mm Carburetor sleeve d.25.5
Reference: 215.0456
Brand: POLINI
Polini lamellar intake manifold diameter 28/30 mm Polini lamellar intake manifold for: Vespa, Vespa 125 2T PX, Vespa 150 2T PX, Vespa 150 2T sprint fast, Vespa 125 2T ts, Lml, Lml star deluxe 125 2T, Lml star deluxe 150 2T
Reference: 215.0452
Brand: POLINI
Polini 360 ° intake manifold sleeve diameter 35mm. Polini Code: 215.0452
Reference: 343.0025
Brand: POLINI
Polini Cp carburetor filter attachment flange diameter 60 mm length 31.1 mm. Polini Code: 343.0025
Reference: 02 5733B
Brand: Malossi
Malossi inclined 20.5x23 mm intake manifold 02 5733B Code: 02 5733B Malossi inclined Nbr intake manifold for Piaggio and Gilera 2T 50cc engines Length 26 mm
Dellorto venturi for phbg carburetor threaded M32x1.25 external diameter 59mm.
Fitting compatible with PHBG 15, 18, 19, 21.
Dellorto Code: 0981400 82