Xmotorstore Payments
Malossi ignition with cone diameter 20 mm 5519635
Code: 5519635
Malossi ignition with internal rotor Mhr Team II with cone diameter 20 mm
ATTENTION: with this type of ignition the vehicle's electrical system is excluded.
The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers:
the first (MAPS) to determine the selection of the advance map
the second (OFFSET) allows to move the selected map + or - 2 °
the third (LIM) indicated especially for 4-stroke engines, allows you to vary the intervention of the rev limiter (from 11,500 to 14,300 Rpm + limiter excluded)
It is also equipped with 8 preset mappings which are divided into:
-7 for 2T engines variable advance
-1 with fixed advance
High voltage coil
- Maximum discharge voltage> 40 KV for engine rotation speeds> 3000 Rpm
- Maximum peak open gap coil voltage> 50KV
-Rise time @ 10bar> 1750V / uS
Rotor-stator group
- Weight reduction of the stator part of about 30%, total -100gr.
- High permeability monolithic magnetic circuit.
-Optimization of the magnetic path.
- Strengthening of the wound part, with a cable of higher thermal class and an increase in the diameter of the wire.
-Electric efficiency improved by + 20%.
-Reduction of the minimum starting speed from 450 Rpm to 370 Rpm.
- Miniature waterproof connector, IP67 certified, with retention lock.
-Automotive class wiring.
-Rotor Ø 58 with permanent Neodymium magnets.
Malossi ignition compatible with:
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA ETS 125
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA PK - ET3 Primavera 125 2T
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA PK XL 125
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA PK 125
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA PK FL 125
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA Primavera 125 2T
Reference: 5519640
Brand: Malossi
Malossi high voltage coil 5519640
Reference: 5518588B
Brand: Malossi
Malossi Digitronic Mhr code 5518588B digital electronic control unit Malossi digital electronic control unit Digitronic Mhr Team with Trimmer. The MHR range is equipped with a non-remappable variable advance ECU.
Reference: 5518279B
Brand: Malossi
Malossi rotor and stator assembly for Vespa 5518279B engine Code: 5518279B Malossi rotor and stator assembly for Vespa engine, diameter 58 mm
Reference: 5515740
Brand: Malossi
Malossi 5515740 strobe controller Code: 5515740 This small-sized instrument not only allows the advance to be checked with disarming ease, thanks to a 200 lm flash with a duration of 10 µs and an extremely short delay (<1µs), but it also completely replaces the classic strobe guns, thanks to the its technical characteristics decidedly superior to many...
Reference: 5519119B
Brand: Malossi
Shielded Malossi spark plug cap 5519119B Malossi code: 5519119B
Reference: 5519221
Brand: Malossi
Malossi spark plug cable and shielded spark plug cap kit 5519221 Malossi code: 5519221 Shielded spark plug connection - Spark plug connection equipped with a high quality resistor, which guarantees constant resistance with minimal variations in overload conditions. -External body made with a robust rubber structure characterized by excellent resistance to...
Reference: 7416936B
Brand: Malossi
Malossi cooling fan diameter 167 mm for Vespower ignition 7416936B Malossi code: 7416936B
Reference: 171.0648
Brand: POLINI
VESPA: VESPA 125 2T PRIMAVERA - VESPA 50 2T SPECIAL - VESPA 125 2T PRIMAVERA ET3
Reference: 01.SD.0119.L
Brand: Ohvale
Pin 8x6.3x12 Ohvale 190/212 Code: 01.SD.0119.L
Reference: 01.RP.0020.L
Brand: Ohvale
Bolt Ohvale M8x25 Code: 01.RP.0020.L
Reference: 6712570
Brand: Malossi
Malossi helical primary gears z 16 / 44 for Honda 6712570 Malossi code: 6712570. Malossi helical primary gears z 16 / 44 Honda. The new HTQ gears have been designed and manufactured with straight/helical teeth to minimize friction losses and stress on the supports. Furthermore, our gears optimize the ratio allowing you to exploit all the power delivered...
Reference: 075114
Brand: C4
Peugeot Ludix h2o cylinder bearing and gasket kit
Reference: 245.085
Brand: POLINI
FOR CLUTCH: 249.046- 249.047- 249.048- 249.049- 249.050- 249.051- 249.061- 249.062
Reference: 171.0554
Brand: POLINI
Ignition Vespa 50/125 et3 pvl Ignition Vespa 125 et3, digital cone diameter 20 mm Vespa ignition for: Vespa, Vespa 125 2t pk, Vespa 125 2t primavera, Vespa 125 2t xl, Vespa 50 2t special, Vespa 125 primavera et3, Vespa 125 2t ets, Vespa 50 2t pk, Vespa 50 2t xl Cone diameter 20 mm Warning: this ignition excludes the operation of the electrical system....
Reference: 11 4969b
Brand: Malossi
Complete Malossi gasket kit for cylinder diameter 45.5 for original head for Honda MBX - MTX R Malossi code: 11 4969b
Reference: 31 4894
Brand: Malossi
Malossi cylinder diameter 47 in aluminum for Suzuki TS X 50 cc Malossi code: 31 4894 Malossi cylinder for Suzuki TS X 50 2T also adaptable to the original head.
Reference: 01.IF.0101.L
Brand: Ohvale
Ohvale Switch hydrostop mod. for Gp-0 Gp-2 110A Code: 01.IF.0101.L
Reference: 206.0336
Brand: POLINI
Polini segment 50.4x1 mm chromed for Minarelli 206.0336
Reference: 5312280
Brand: Malossi
Malossi Rhq crankshaft 5312280 Malossi code: 5312280 Malossi Rhq crankshaft with 12 mm diameter pin and 39 mm stroke.
Reference: GHR 060.001
Brand: GHR
Minibike silencer Ghr. Metal silencer compatible with Cs, Ghr, Bzm exhausts.
Reference: 4611641
Brand: Malossi
Malossi Rs24 4611641 rear shock absorber for Gilera Dna Malossi code: 4611641 Malossi rear Rs24 shock absorber, wheelbase 410 mm. Regenerable oil-pneumatic shock absorber with bilamellar piston and diaphragm compensation. -Piston diameter 36 mm with two independent lamellar packs: one in extension and one in compression; harmonic steel lamellar system...
Reference: 4516051B
Brand: Malossi
Malossi Sport windshield 4516051B Malossi code: 4516051B. Dark smoke colored screen. Length 37 cm. Height 35 cm. Thickness 0.3 cm.
Reference: 244.030
Brand: POLINI
Fixed half-pulley Yamaha Beluga 50cc. Polini Code: 244.030
Malossi ignition with cone diameter 20 mm 5519635
Code: 5519635
Malossi ignition with internal rotor Mhr Team II with cone diameter 20 mm
ATTENTION: with this type of ignition the vehicle's electrical system is excluded.
The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers:
the first (MAPS) to determine the selection of the advance map
the second (OFFSET) allows to move the selected map + or - 2 °
the third (LIM) indicated especially for 4-stroke engines, allows you to vary the intervention of the rev limiter (from 11,500 to 14,300 Rpm + limiter excluded)
It is also equipped with 8 preset mappings which are divided into:
-7 for 2T engines variable advance
-1 with fixed advance
High voltage coil
- Maximum discharge voltage> 40 KV for engine rotation speeds> 3000 Rpm
- Maximum peak open gap coil voltage> 50KV
-Rise time @ 10bar> 1750V / uS
Rotor-stator group
- Weight reduction of the stator part of about 30%, total -100gr.
- High permeability monolithic magnetic circuit.
-Optimization of the magnetic path.
- Strengthening of the wound part, with a cable of higher thermal class and an increase in the diameter of the wire.
-Electric efficiency improved by + 20%.
-Reduction of the minimum starting speed from 450 Rpm to 370 Rpm.
- Miniature waterproof connector, IP67 certified, with retention lock.
-Automotive class wiring.
-Rotor Ø 58 with permanent Neodymium magnets.
