Xmotorstore Payments
Malossi variator multivar 2000 MHR for Yamaha Tmax 530cc 560cc 5118054.
Multivar MHR Next was born from the desire to renew the transmission system to take full advantage of its exceptional technical characteristics. This new variator, developed from the many years of experience acquired on racing circuits and from the Cad-Cam technology available today, represents the evolution of previous generations of variators and offers performance results at the highest levels.
The mobile half-pulley is the characterizing component of the entire system and is therefore subject to constant evolution. Designed with a larger diameter than the original, it allows for a significantly higher excursion of the transmission ratio than the original pulley. Advanced CAE (Computer-Aided Engineering) systems have enabled our technicians to analyze the movements of the entire system in the vehicle in operation, to further optimize the geometry of the pulley and avoid collisions even in the most critical conditions of use. The new reinforcement ribs, developed to lighten the less critical areas, allow to reduce inertias and consequently dissipate less energy from the engine. For a strong aesthetic impact, the MALOSSI and MULTIVAR logos have been subjected to a diamond coating process.
Technical features:
Shift range further extended, especially the short gear.
Linearity of shifting improved throughout the phase
Hard black anodizing treatment
Roller sliding ramp modified to allow greater linearity of operation in order to maintain the maximum power regime
Sliding bush in ground hardened steel
Ground chrome-plated case-hardened steel hub
New monolithic rollers in even more performing material
Supplied with two different sets of rollers and two shims that allow you to vary the speed of the shift curve of your scooter, perfectly adjusting its speed and pickup.
NB: To further improve performance, we recommend combining it with the new X K Belt MHR (art. 6118071).
Malossi variator multivar 2000 MHR 5118054.
Multivar MHR Next was born from the desire to renew the transmission system to take full advantage of its exceptional technical characteristics. This new variator, developed from the many years of experience acquired on racing circuits and from the Cad-Cam technology available today, represents the evolution of previous generations of variators and offers performance results at the highest levels.
The mobile half-pulley is the characterizing component of the entire system and is therefore subject to constant evolution. Designed with a larger diameter than the original, it allows for a significantly higher excursion of the transmission ratio than the original pulley. Advanced CAE (Computer-Aided Engineering) systems have enabled our technicians to analyze the movements of the entire system in the vehicle in operation, to further optimize the geometry of the pulley and avoid collisions even in the most critical conditions of use. The new reinforcement ribs, developed to lighten the less critical areas, allow to reduce inertias and consequently dissipate less energy from the engine. For a strong aesthetic impact, the MALOSSI and MULTIVAR logos have been subjected to a diamond coating process.
Technical features:
Shift range further extended, especially the short gear.
Linearity of shifting improved throughout the phase
Hard black anodizing treatment
Roller sliding ramp modified to allow greater linearity of operation in order to maintain the maximum power regime
Sliding bush in ground hardened steel
Ground chrome-plated case-hardened steel hub
New monolithic rollers in even more performing material
Supplied with two different sets of rollers and two shims that allow you to vary the speed of the shift curve of your scooter, perfectly adjusting its speed and pickup.
NB: To further improve performance, we recommend combining it with the new X K Belt MHR (art. 6118071).
Reference: 323.0112
Brand: POLINI
VESPA: VESPA 125 2T PRIMAVERA - VESPA 50 2T SPECIAL - VESPA 125 2T PRIMAVERA ET3POLINI: RICAMBI ACCENSIONE For ignition ref. 171.0545
Reference: 2918474
Brand: Malossi
Malossi clutch springs for Vespa PX and T5 Malossi code: 2918474 Malossi spring for VESPA PX 125 2T euro 0-1. Malossi spring for VESPA PX 150 2T euro 0-1. Malossi spring for VESPA PX E 200 2T. Malossi spring for VESPA T5 125 2T.
Reference: 404615
Brand: T4TUNE
Pair of front led indicators for Vespa LX 50 125 Code: 404615 Ean: 9900000048877
Reference: 201.2402
Brand: POLINI
Polini Cp 24 carburetor for Vespa 125 Primavera ET3 with filter. Polini Code: 201.2402 The Polini 24 carburettor is mounted on manifolds with a 28.5 mm diameter rubber sleeve. Polini 24 CP carburettor data sheet: Maximum jet 104 Minimum Jet 36 Needle 14/22 25x30 valve Pulverizer bush d.2,7
Reference: 01.SB.0903.L
Brand: Ohvale
Ohvale Gasket crankcase Code: 01.SB.0903.L
Reference: 3218624
Brand: Malossi
Malossi silencer diameter 70 mm in aluminum Malossi code: 3218624
Reference: 2513878B
Brand: Malossi
Original Malossi roller guide plate for Multivar variator. Code 2513878B. High-precision part for optimal variator performance.
Reference: 140.0232
Brand: POLINI
Polini cylinder for Vespa 200 Pe Px. Polini code: 140.0232 . The Polini cylinder with a diameter of 68.5 and a stroke of 60mm. it allows to increase the displacement to 221cc, made of aluminum it allows to better dispose of the heat by lowering the operating temperature in the most demanding uses. The Polini cylinder for Vespa has been revisited by...
Reference: GHR 501.002
Brand: GHR
40cc air Ghr engine (without carburetor and filter). 40cc air Ghr engine including complete marmiatta, the engine does not include the carburetor. Ghr minimoto engine complete with muffler, silencer. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes.
Reference: 0000370006312
Brand: PMJ jeans moto
Pmj Cruise motorcycle jeans. Pmj Cruise: Revolutionary in details, appearance and comfort. For lovers of Specials and not, promoter of a timeless style. Pmj Cruise motorcycle jeans features: - T-STRETCH®: Stretch Twaron® Single Layer Technology. - Anatomically shaped knee construction. - Casual fit. - PPE approved according to EN17092-3 (AA). - CE 1621-1...
Reference: 228.0005
Brand: POLINI
Stainless steel traction springs with swivel hooks and 67mm rubber pads. Polini: 228.0005
Reference: 01.SW.0517.L
Brand: Ohvale
Ohvale Gasket oil pump Code: 01.SW.0517.L
Reference: 206.0310
Brand: POLINI
Polini segments diameter 67 mm Polini segments for: Aprilia, Aprilia Leonardo 125, Aprilia Leonardo 150, Aprilia Scarabeo 125, Aprilia Scarabeo 150, Polini, Rotax, Rotax 4T
Reference: 01.IF.0096.L
Brand: Ohvale
Ohvale Tube screw with O-ring Code: 01.IF.0096.L
Reference: 01.SB.0904.L
Brand: Ohvale
Ohvale Right crankcase blockCode: 01.SB.0904.L
Malossi variator multivar 2000 MHR for Yamaha Tmax 530cc 560cc 5118054.
Multivar MHR Next was born from the desire to renew the transmission system to take full advantage of its exceptional technical characteristics. This new variator, developed from the many years of experience acquired on racing circuits and from the Cad-Cam technology available today, represents the evolution of previous generations of variators and offers performance results at the highest levels.
The mobile half-pulley is the characterizing component of the entire system and is therefore subject to constant evolution. Designed with a larger diameter than the original, it allows for a significantly higher excursion of the transmission ratio than the original pulley. Advanced CAE (Computer-Aided Engineering) systems have enabled our technicians to analyze the movements of the entire system in the vehicle in operation, to further optimize the geometry of the pulley and avoid collisions even in the most critical conditions of use. The new reinforcement ribs, developed to lighten the less critical areas, allow to reduce inertias and consequently dissipate less energy from the engine. For a strong aesthetic impact, the MALOSSI and MULTIVAR logos have been subjected to a diamond coating process.
Technical features:
Shift range further extended, especially the short gear.
Linearity of shifting improved throughout the phase
Hard black anodizing treatment
Roller sliding ramp modified to allow greater linearity of operation in order to maintain the maximum power regime
Sliding bush in ground hardened steel
Ground chrome-plated case-hardened steel hub
New monolithic rollers in even more performing material
Supplied with two different sets of rollers and two shims that allow you to vary the speed of the shift curve of your scooter, perfectly adjusting its speed and pickup.
NB: To further improve performance, we recommend combining it with the new X K Belt MHR (art. 6118071).
