- Reduced price
- New
Xmotorstore Payments
Malossi intake manifold for Mbk 88 89 50cc, 5.5X19 mm inclined with center distance 41-47 mm for SHA 15/15 carburetor. Malossi code: C02 2066B
Reference: 2043
Brand: DELLORTO
Dell'orto SHA 15/15 carburettor with filter, the sha 15 15 carburettor is dedicated to low displacement mopeds. Sha 15/15 calibrations: Motor connection: from 21 to 17 mm Air filter attachment: 59 For engines: 2-stroke two-stroke Air start: lever Float: 3.5 gr Dellorto Code: 02043
Reference: 420015
Brand: XRACING
Motorcycle silicone fuel hose for various applications. This petrol hose for carburetor, tank, and other uses, allows maximum curvature without blocking the flow of fuel. These racing fuel hoses are suitable for all vehicles. Fuel pipe size: 1 METER Fuel tube internal diameter: 5.5mm External diameter of fuel pipe: 6mm Available colors: white petrol tube,...
Reference: 112.104.00
Brand: GRC
Bearing kit plus spacer for hub Grc Select the desired measure between: 90/94/110/114. L.90 front (for mechanical brake) L.94 front (for hydraulic-mechanical brake) L.111 rear (for mechanical brake) L.114 rear (for hydraulic brake)
Reference: 5514750
Brand: Malossi
Lambda emulator TC UNIT O2 Malossi controller 5514750 Code: 5514750 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is constant,...
Reference: MC28
Brand: HJC
HJC Y10 Mika Helmet HJC Y10 Mika full-face helmet. Advanced Polycarbonate Composite (ACS) shell: Wind tunnel tested, lightweight, with superior fit and improved comfort. ACS Advanced Channeling Ventilation System: Full front-to-back airflow wicks heat and humidity upward and outward. Pinlock Ready HJ-50 Visor: Offers 99% UV protection, anti-scratch...
Reference: 01.IF.0010.L
Brand: Ohvale
Ohvale Rear brake caliper support Formula Code: 01.IF.0010.L
Reference: 01.SD.1001.L
Brand: Ohvale
Ohvale Kick starting shaft ASM 4S Code: 01.SD.1001.L
Reference: 143.000.261
Brand: POLINI
Minimoto Polini 910 Rs hull with 6.2 HP air motor, 6.5 inch wheels, white colour. Polini code: 143.000.261. Minimoto Polini 910 S hull 6.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...
Reference: 6115781
Brand: Malossi
Complete transmission unit Malossi OVER RANGE MHR - PIAGGIO 2000 (long crankcase) Malossi code: 6115781 Malossi transmission unit for APRILIA MOJITO CUSTOM 50 2T. Malossi transmission unit for APRILIA SR (carb.) 50 2T LC 2004 (PIAGGIO). Malossi transmission unit for APRILIA SR MOTARD 50 2T euro 2. Malossi transmission unit for APRILIA SR R (carb.) 50 2T...
Reference: 170.0600
Brand: POLINI
Polini engine crankcase for Vespa PX 200 E, product code 170.0600. Advanced reed valve intake, reinforced structure and full OEM compatibility. Street and racing use. ATTENTION: DELIVERY FROM APRIL 2026.
Reference: 6714530
Brand: Malossi
Wheel axle shaft 136.9 mm with 27 mm diameter keying Malossi 6714530 Malossi code: 6714530 The new wheel shaft has been designed and manufactured to be perfectly housed in the original gearbox and does not require any modification. Ideal match: MHR gear case
Reference: 243.101
Brand: POLINI
Polini contrast spring for Evo slider Piaggio diameter 4.4 mm Code: 243.101 ATTENTION: If used on Yamaha engines, it can only be mounted in conjunction with the Polini Speed Drive. Application: Aprilia, Aprilia Scarabeo 50 2T Street restyling Piaggio / 50 4T 2V Restyling Piaggio / 50 4T 4V Piaggio from 2009, Aprilia Sr 50 2T R, LC / 50 2T R, / 50 2T R,...
Reference: 204.0697/A
Brand: POLINI
Polini piston diameter 47.6 mm, selection A (47.545 mm) 204.0697/A
Reference: KIT.REV.P.4,2
Brand: POLINI
Polini 4.2 hp engine overhaul kit. comprehends : Racing main bearings c4. Complete gasket kit 4.2 HP. Segment 40 or 50cc. Roller cage.
Reference: 5113513
Brand: Malossi
Malossi Multivar 2000 variator 5113513 Code: 5113513 After the great success of the MHR multivar, Malossi presents to his audience a new variator for Tmax designed and designed for a sporting use, but not racing! With this new Malossi variator, it is aimed at all those who want to make their Tmax a decidedly more performing medium, while remaining in the...
Reference: PEARL WHITE
Brand: HJC
Hjc RPHA 91 Uni helmet. The RPHA 91 is HJC's new modular touring helmet designed for all-day comfort. The new Premium Integrated Matrix EVO (P.I.M. EVO) shell offers improved shockproof performance and is lightweight thanks to the use of reinforcement materials that include carbon-aramid, carbon fiber, fiberglass, organic non-woven fabric and linen fiber...
Reference: 271.0007
Brand: POLINI
Polini pin diameter 12x33 mm. Polini Code: 271.0007
Reference: 7005
Brand: STAMAS
Pair of bushes for Stamas minimoto steering head bearing
Malossi intake manifold for Mbk 88 89 50cc, 5.5X19 mm inclined with center distance 41-47 mm for SHA 15/15 carburetor. Malossi code: C02 2066B