- Reduced price
- New
Xmotorstore Payments
Polini SI 26/26E carburetor with oil mixer and R617 calibration for Vespa PX and Cosa 2T models. Plug & play replacement. Code 201.0175.
The Polini SI 26/26E carburetor with oil mixer R617 (code 201.0175) is the oversized version of the SI range for Vespa PX and Cosa 2T models, designed for both stock and tuned engines.
✔ Plug & Play installation
Direct replacement for the original carburetor with no modifications required.
✔ Oil mixer compatible
Maintains the automatic oil injection system.
✔ R617 calibration
Polini-developed setup optimized for improved fuel flow and higher performance on upgraded engines.
VESPA:
125 2T PX
125 2T TS
125/150 2T Cosa
150 2T PX
200 2T Cosa
200 2T PE, PX
Reference: 201.1705
Brand: POLINI
Polini Cp 17,5 Evolution carburetor. Polini Code: 201.1705. Polini evolution carburetors are intended for competitions: it is necessary to eliminate the mixer and the vacuum tap. Polini 17,5 evolution carburetor features: Maximum jet 100 Idle jet 38 Needle 14/22 24x40 valve Pulverizer bush d.2,6 Air filter connection 60 mm Carburetor sleeve d.25.5
Reference: 143.802.004
Brand: POLINI
Complete petrol tank Polini 910 black minibike. Code: 143.802.004. Polini 910 tank complete with petrol tap and cap compatible with all Polini 910 mini bikes.
Reference: 61 8317
Brand: Malossi
Malossi torque driver Malossi code: 61 8317 Malossi torque drivers for BAOTIAN ECO BIKE 50 4T (139 QMB). Malossi torque drivers for BAOTIAN REBEL - ROCKY - TANCO 9/12 50 4T. Malossi torque drivers for BSV DIO GP 50 (AF18E). Malossi torque drivers for BSV DIO ZX 50 <-1993 (AF18E). Malossi torque drivers for BSV DIO ZX 50 2T 1994-> (AF34E). Malossi...
Reference: 6274.82.52.06-0
Brand: Domino
Pair of open Domino style grips. Available: Pair of open black Domino style grips 6274.82.40.06-0 Pair of blue Domino style open grips 6274.82.48.06-0 Pair of open red Domino style grips 6274.82.42.06-0 Pair of open gray Domino style grips 6274.82.52.06-0 Pair of open brown Domino style knobs 6274.82.64.06-0 Material: Thermoplastic rubber Length: 120mm...
Reference: Gp-0-110-auto
Brand: Ohvale
Ohvale gp-0 Evo 110cc 4t automatic, with electric start. Ohvale gp-0 evo 110 automatic 2026 technical sheet: ENGINE TYPE: ZS 110 cc Horizontal single cylinder, 4 stroke, Air cooled. DISTRIBUTION: Single camshaft, SOHC - 2 valves. FUEL: Unleaded petrol (N.O. min 95). BORE X STROKE: 52.4mm x 49.5mm. DISPLACEMENT: 106.7 cc. FUEL SYSTEM: KF PZ19 carburetor...
Reference: 3215230
Brand: Malossi
Malossi Gp mhr 3215230 replica exhaust Code: 3215230 After stringent tests in the Malossi test rooms, equipped with the most modern and sophisticated equipment, the engineers of the study and research department were able to improve the vehicle's performance in compliance with the regulations. The GP mhr REPLICA mufflers are aimed at sporty and demanding...
Reference: 144.305.005
Brand: POLINI
Polini minicross saddle fixing screw 144.305.005
Reference: R03.FO.0022.L
Brand: Ohvale
Ohvale Racing Chain Tensioner - 110/160EVO Code: R03.FO.0022.L
Reference: 050223
Brand: T4TUNE
SUPERBIKE CARBON adhesive tank protection. Universal for motorcycles. Tank protection dimensions: Height at the highest point: 23 cm (Tips) Central height: 21 cm (Between half moon and lowest point). Upper part width: 12.5 cm Lower part width: 5 cm
Reference: 11 5252
Brand: Malossi
Malossi gasket pack reed valve intake for Peugeot mopeds Malossi code: 11 5252
Reference: 200.0431
Brand: POLINI
Hand-welded Polini Evolution exhaust for Peugeot 103 G1, 104, 105 and GL10. Designed for tuned engines, improves acceleration and top-end performance.
Reference: 204.0370/B
Brand: POLINI
Polini piston diameter 47 mm selection B Polini piston for: Aprilia, Aprilia ET 50, Aprilia Europa 50, Aprilia Futura 50, Aprilia Red rose 50, Aprilia Replica 50, Aprilia RX 50, Aprilia Tuareg rally 50, Aprilia Tuareg wind 50, Aprilia AF1 50 Futura, Atala, Atala Master 50, Atala Hydro, F. Morini, F. Morini GS.A 50, F. Morini TA 50, Malaguti, Malaguti...
Reference: A2111
Brand: Alfano
185 cm "NTC" M10 water temperature sensor A2111. 185cm long version M10 "NTC" water sensor. This NTC technology sensor with a 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264. Note: This sensor is...
Reference: 6716721
Brand: Malossi
Malossi HTQ primary gears z 23 / 64 for Vespa 6716721 Malossi code: 6716721. The Malossi HTQ gears for Vespa PX collect the legacy of the first gear project produced by Malossi between the late 80s and early 90s. Completely redesigned, this pair of primary gears uses a straight tooth configuration instead of the standard helical ones.
Reference: 03.IF.0066.L
Brand: Ohvale
Ohvale bleeder kit rear Code: 03.IF.0066.L
Reference: 144.255.004
Brand: POLINI
Polini 3G clutch springs and nuts. Replacement springs for Polini mini-motard clutch. Polini Code: 144.255.004
Polini SI 26/26E carburetor with oil mixer and R617 calibration for Vespa PX and Cosa 2T models. Plug & play replacement. Code 201.0175.