Xmotorstore Payments
Malossi Gp mhr 3215230 replica exhaust
Code: 3215230
After stringent tests in the Malossi test rooms, equipped with the most modern and sophisticated equipment, the engineers of the study and research department were able to improve the vehicle's performance in compliance with the regulations.
The GP mhr REPLICA mufflers are aimed at sporty and demanding customers, they personalize your vehicle with their elegance and with a "performing sound", completing the thermodynamic cycle of the very famous Malossi mHR REPLICA thermal units.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 1 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. of the cones and counter-cones. With internal silencing bulkheads, aluminum alloy support bracket with anti-vibration connection. Transparent fired varnish.
SILENCER in aluminum, anodized Nitro blue.
Malossi exhaust for:
3215230 MALOSSI EXHAUST GP MHR REPLICA APRILIA RS 50 2T LC EURO 4 2018 onwards (D50B0)
3215230 MALOSSI EXHAUST GP MHR REPLICA APRILIA RS4 50 2T LC EURO 2 (DERBI)
3215230 MALOSSI EXHAUST GP MHR REPLICA DERBI GPR R 50 2T LC EURO 2 2012 onwards
Reference: 0612631B
Brand: Malossi
Malossi silencer gasket Malossi code: 0612631B
Reference: 3219574br
Brand: Malossi
Malossi silencer tube with external diameter 70 in anodized aluminum Malossi Code: 3219574 Malossi silencer tube with external diameter 70 in red anodized aluminum Malossi silencer tube with external diameter 70 in yellow anodized aluminum Malossi silencer tube with external diameter 70 in black anodized aluminum
Reference: 3217543
Brand: Malossi
Malossi silencer diameter 70 mm in aluminum for MHR REPLICA exhaust Malossi code: 3217543
Reference: 01.SZ.0514.L
Brand: Ohvale
Ohvale Strainer oil filter Code: 01.SZ.0514.L
Reference: 5518829B
Brand: Malossi
Lambda O2 Malossi controller 5518829B emulator Code: 5518829B The use of the new O2 controller allows the management of the carburetion in the area where the Lambda probe controls the title of the fuel-air mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a different value from the stoichiometric...
Reference: 248.100
Brand: POLINI
Polini variator belt for Sym Gts Joymax 250 Aramid Code: 248.100 Application: Sym, Sym Joymax 250, Sym Gts, Rv 250
Reference: 204.0829/B
Brand: POLINI
Polini piston diameter 50 mm selection B (49.955 mm) Code: 204.0829 / B Polini piston for: Aprilia, Aprilia RX-SX 50, Aprilia RS 50, Aprilia RS4 50, Bultaco, Bultaco Astro 50, Bultaco Lobito 50, Derbi, Derbi GPR 50, Derbi Senda 50 DRD R, Derbi Senda 50 DRD SM, Derbi Senda 50 DRD, Derbi SM, Derbi Senda 50 Extreme, Derbi Senda 50 Extreme SM, Derbi Senda 50...
Reference: 2013106
Brand: Malossi
Complete Malossi kit 2013106 including bleed fitting, sealing plug, and roller cage. OEM-quality replacement for high-performance scooter components.
Reference: 246.056
Brand: POLINI
Reinforced transmission nuts series M10x1.25 / M12x1.25 Code 246.056 EAN number 8054705117282
Reference: 248.036
Brand: POLINI
Polini variator belt for Kymco Sniper 50 in Aramid Code 248.036 Application: Garelli, Garelli Capri 50 4T, Garelli Ciclone 50 4T, Kymco, Kymco Heroism 50, Kymco Sniper 50 DD
Reference: 171.0020
Brand: POLINI
Polini ecm control unit for Piaggio Vespa 50 cc 4t euro 5. Polini code: 171.0020 Polini updates the ECM control unit “ENGINE CONTROL MODULE” for Vespa, Liberty 50 cc and ZIP 4T Euro 5. polini control unit for piaggio liberty 50 4t iget 3v ie e5 from 2021. Polini control unit for Piaggio Zip 50 4T 3V IE E5 from 2021. polini control unit for vespa 50 4t...
Reference: 01.SZ.0225.L
Brand: Ohvale
Ohvale Chain tensioner push rod assembly Code: 01.SZ.0225.L
Reference: 03.ST.0006.L
Brand: Ohvale
Ohvale Gp-2 Half-Handlebar. Ohvale Code: 03.ST.0006.L Specific half-handlebar for Gp-2, and original Ohvale Gp-0 EVO. Ohvale half-handlebar application 03.ST.0006.L: Gp-2 Half-Handlebar. Gp-0 EVO Half-Handlebar.
Reference: A2153
Brand: Alfano
Water temperature sensor 1/8 GAS 40 cm A2153. This 1 / 8GAS threaded thermocouple K-technology sensor can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 6112741
Brand: Malossi
Malossi X Special belt strap for scooter atv quad 16.5x8x796 mm angle 30 Malossi code: 6112741 Malossi belt for AEON MOTOR COBRA 50 2T (AT70). Malossi belt for APRILIA SONIC 50 2T. Malossi belt for APRILIA SONIC 50 2T LC. Malossi belt for DINLI HELIX DL603 50 2T (06A53). Malossi belt for DINLI HELIX DL603 90 2T (06B93). Malossi belt for DINLI T.REX 50...
Reference: 5510094
Brand: PBR
Motorcycle handlebar 28 / 22mm in blue ergal. Pbr: 5510094. Ergal handlebar diameter 28.6 mm in the central part (fork plate attachment) diameter 22 mm for knobs and controls. Without crossbar, road racing model. Measurements: A = 720 B = 150 C = 100 D = 105 mm With hole for 14 mm terminal
Reference: 175.0044
Brand: POLINI
Polini brake disc for Piaggio Zip-Sp-Vespa-Liberty 50-125-150 diameter 200 mm Code 175.0044 Application: Gilera Dna 50 brake disc, Gilera Ice 50 brake disc, Piaggio Fly 50 2T brake disc, Piaggio Fly 50 4T 2V brake disc, Piaggio Fly 125/150 brake disc (leader), Piaggio Free brake disc, Piaggio Hexagon 125 Lx brake disc, Piaggio Hexagon 180 LXT brake disc,...
Reference: 1610910
Brand: Malossi
Malossi shbc 19 lamellar fuel system on the crankcase with mixer for Piaggio Ape 50cc Code: 1610910 Application: Malossi fuel system for Piaggio Ape 50 2T up to 1989 Malossi fuel system for Piaggio Ape FL2 50 2T from 1990 to 1995 Malossi fuel system for Piaggio Ape FL3 50 2T from 1996 to 1999 Malossi fuel system for Piaggio Ape FL 50 2T from 1989 to 1990
Reference: 1715715
Brand: Malossi
Flywheel mass Malossi diameter 144 for VESPower - flywheel Kg. 1.2 Malossi code: 1715715 Flywheel mass Malossi for VESPA COSA 125 2T not to be used on vehicles with VESPower art. 5515702 5516956. Flywheel mass Malossi for VESPA COSA 150 2T not to be used on vehicles with VESPower art. 5515702 5516956. Flywheel mass Malossi for VESPA COSA 200 2T not to be...
Malossi Gp mhr 3215230 replica exhaust
Code: 3215230
After stringent tests in the Malossi test rooms, equipped with the most modern and sophisticated equipment, the engineers of the study and research department were able to improve the vehicle's performance in compliance with the regulations.
The GP mhr REPLICA mufflers are aimed at sporty and demanding customers, they personalize your vehicle with their elegance and with a "performing sound", completing the thermodynamic cycle of the very famous Malossi mHR REPLICA thermal units.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 1 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. of the cones and counter-cones. With internal silencing bulkheads, aluminum alloy support bracket with anti-vibration connection. Transparent fired varnish.
SILENCER in aluminum, anodized Nitro blue.
