- New

Xmotorstore Payments
185 cm "NTC" M10 water temperature sensor A2111. 185cm long version M10 "NTC" water sensor.
This NTC technology sensor with a 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264.
Note: This sensor is specially designed to be used without extension for Karting.
185 cm "NTC" M10 water temperature sensor A2111. 185cm long version M10 "NTC" water sensor.
This NTC technology sensor with a 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264.
Note: This sensor is specially designed to be used without extension for Karting.
Reference: A2101
Brand: Alfano
45 cm "NTC" M10 water temperature sensor A2101. This NTC technology sensor with a 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264. Note: This sensor must be used with an A3301 extension cable or...
Reference: 3217326B
Brand: Malossi
Belly exhaust Malossi 3217326B racing Mhr C-one Yamaha Code: 3217326B Malossi exhaust belly for Mhr C-one Yamaha racing scooters with a diameter of 47.6
Reference: 210.0020
Brand: POLINI
Polini crankshaft for Piaggio-Gilera stroke 39.3 connecting rod 85 mm Code 210.0020 EAN number: 8054705064210
Reference: 204.0320
Brand: POLINI
Ape piston diameter 69mm pin 18mm. Polini Code: 204.0320 Polini piston for: Piaggio, Piaggio Ape 610, Piaggio Ape Car, Piaggio Ape P 501, Polini
Reference: 01.SZ.0122.L
Brand: Ohvale
Ohvale Bolt M6x23 110 4S Code: 01.SZ.0122.L
Reference: 343.0024
Brand: POLINI
Polini carburetor filter attachment flange Cp. Polini flange measurements: diameter 60 mm length 12 mm. Polini Code: 343.0024
Reference: 1117422B
Brand: Malossi
Complete gasket kit for 47 diameter cylinder kit Malossi code: 1117422B
Reference: meteor36cs
Brand: Tecnominimoto
Piston diameter 36 Meteor for Cs Iame 40cc ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat Indeformability to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Reinforced...
Reference: 02 0457B
Brand: Malossi
Malossi collector for Gilera Cb1 19X24 mm inclined with center distance 45 - 50 for PHBG 19.5 carburetors. Malossi code: 02 0457B
Reference: 01.RP.0023.L
Brand: Ohvale
Front wheel Ohvale bearing from 2021 Code: 01.RP.0023.L
Reference: GHR 057.001
Brand: GHR
Complete exhaust Ghr factory team for 50cc engine. The complete Ghr muffler includes: - 3 hole exhaust flange - Collector - Belly - Silencer - Springs and anti-vibration
Reference: 01.CA.0021.L
Brand: Ohvale
Threaded rubber insert m4 Ohvale 01.CA.0021.L ATTENTION: PRICE FOR SINGLE INSERT.
Reference: 2513879B
Brand: Malossi
Malossi roller guide cap for variator 2513879B Malossi code: 2513879B Malossi roller guide cap for Multivar variator 2513879B.
Reference: 143.565.002
Brand: POLINI
Polini 910 mini bike front brake wire guide shoe. Polini code: 143.565.002
Reference: 209.0320
Brand: POLINI
Polini gasket set for Rotax 127 engine Polini gaskets set for: Aprilia, Aprilia AF1 125, Aprilia ETX 125, Aprilia Red rose 125, Aprilia Tuareg 125, Rotax, Rotax 127, Polini
Reference: 201.0170
Brand: POLINI
Polini 32 carburettor. Polini code: 201.0170 Air filter attachment d.54 Carburetor sleeve d.40
Reference: 248.040.2
Brand: POLINI
Polini variator belt for Yamaha Mbk Booster in Aramid Code 248.040.2 Attention, the evolution belt, speed drive and contrast spring components must only be assembled together Application: Aprilia, Aprilia Area 51, Aprilia Gulliver 50/50 LC, Aprilia Habana 50, Aprilia Rally 50/50 LC, Aprilia SR 50 2T / 50 2T H2O / 50 2T LC Stealth / 50 2T Air / 50 2T WWW,...
185 cm "NTC" M10 water temperature sensor A2111. 185cm long version M10 "NTC" water sensor.
This NTC technology sensor with a 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264.
Note: This sensor is specially designed to be used without extension for Karting.