Xmotorstore Payments
Minimoto piston 40mm for Bzm Tcm Or Blata.
Minimoto piston diameter 40 mm with 10 mm pin and flat head, for 50 cc minimoto engines, available in various sections.
Can be used for:
- Piston Bzm 50 cc 2t flat head.
- Piston Or 50 cc 2t flat head.
- Piston Blata 50 cc 2t flat head.
- Piston Tcm 50 cc 2t flat head.
Spare parts included:
The piston complete with 10 mm diameter pin and chrome band.
Assembly notes:
A minimum tolerance of 5.6 hundredths is recommended.
Minimoto piston 40mm for Bzm Tcm Or Blata.
Minimoto piston diameter 40 mm with 10 mm pin and flat head, for 50 cc minimoto engines, available in various sections.
Can be used for:
- Piston Bzm 50 cc 2t flat head.
- Piston Or 50 cc 2t flat head.
- Piston Blata 50 cc 2t flat head.
- Piston Tcm 50 cc 2t flat head.
Spare parts included:
The piston complete with 10 mm diameter pin and chrome band.
Assembly notes:
A minimum tolerance of 5.6 hundredths is recommended.
Reference: 112.238.21
Brand: GRC
Upper engine pin 8x160 midi rrz-3 Grc
Reference: 01.AM.0009.L
Brand: Ohvale
Self-locking nut M14x1.5 Ohvale. Ohvale Code: 01.AM.0009.L Self-locking nut compatible with all Ohvale GP-0 models and for the GP-2 wheel axle.
Reference: peeweemanracing
Brand: GIMOTO
Minimoto suit for adults, Peewee racing model Gimoto, Item developed for competitive sports use. Cowhide (1.2 mm - 1.3 mm) Suretta fabric Aerodynamic hump CE EN 1621-1 approved protectors on shoulders, elbows, patella-shin External kit-r on shoulders, elbows and knees Elasticated bellows on shoulders, back and knees Knee and elbow sliders 4 customizable...
Reference: 5511173B
Brand: Malossi
Malossi stator for rotor ignition 5511173B Malossi code: 5511173B Stator dimensions: 58 mm internal diameter. 100 mm external diameter.
Reference: 03.PE.0008.L
Brand: Ohvale
Rear brake pump support Ohvale Gp-2 and Gp-0 110 160 EVO. Ohvale Code: 03.PE.0008.L Application: Ohvale Gp-2 rear brake master cylinder support. Rear brake pump support Ohvale Gp-0 110 4S evo. Ohvale Gp-0 160 evo rear brake pump support.
Reference: 001002SP1200
Brand: DM
Rear wheel axle for steel swingarm since 2008 DM
Reference: 2911848
Brand: Malossi
Malossi RACING clutch spring series for maxi scooters Malossi code: 2911848 RACING SPRING for ORIGINAL clutch for MALOSSI FLY and DELTA clutches Springs in pre-hardened carbon steel with a high yield point, protected by a highly heat-resistant paint in various colours. The different colours highlight the load of each set of springs.
Reference: 01.SE.0101.L
Brand: Ohvale
Ohvale Recovery tank bracket Code: 01.SE.0101.L
Reference: 0000528.090
Brand: Acerbis
Acerbis Rally minicross handguards. Very easy to assemble thanks to the standard kit and the universal diameter of 22mm. Available: Acerbis Rally minicross black handguards, code: 0005511.090 Acerbis Rally minicross white handguards, code: 0005511.030 Made in Italy.
Reference: 203.0048
Brand: POLINI
FOR PHBG-PHBD COD. 203.0048 CONNECTION: 32 LENGTHINESS: 92 DIAMETER: 80 FOR PHVA-PHBN COD. 203.0044 CONNECTION: 36 LENGTHINESS: 92 DIAMETER: 80 FOR PHBL-PHBH COD. 203.0052 CONNECTION:...
Reference: 213.0054
Brand: POLINI
Reed valve Polini Vespa 125cc 2t et3 213.0054
Reference: 01.AS.0106.L
Brand: Ohvale
Ohvale Mesh filter D.49 Code: 01.AS.0106.L
Reference: 01.SD.0615.L
Brand: Ohvale
Ohvale Gasket cover clutch Code: 01.SD.0615.L
Reference: 075101
Brand: C4
Skf bearing kit and Minarelli Am6 cylinder gaskets
Reference: 01.SB.1209.L
Brand: Ohvale
Ohvale Stator assy magnetoCode: 01.SB.1209.L
Reference: 01.AM.0008.L
Brand: Ohvale
Ohvale shock absorber length adjustment spacer. Ohvale code: 01.AM.0008.L Compatible for all Ohvale GP-0 and GP-2 models.
Minimoto piston 40mm for Bzm Tcm Or Blata.
Minimoto piston diameter 40 mm with 10 mm pin and flat head, for 50 cc minimoto engines, available in various sections.
Can be used for:
- Piston Bzm 50 cc 2t flat head.
- Piston Or 50 cc 2t flat head.
- Piston Blata 50 cc 2t flat head.
- Piston Tcm 50 cc 2t flat head.
Spare parts included:
The piston complete with 10 mm diameter pin and chrome band.
Assembly notes:
A minimum tolerance of 5.6 hundredths is recommended.
