- Reduced price
- New
Xmotorstore Payments
Self-locking nut M14x1.5 Ohvale. Ohvale Code: 01.AM.0009.L
Self-locking nut compatible with all Ohvale GP-0 models and for the GP-2 wheel axle.
Self-locking nut M14x1.5 Ohvale. Ohvale Code: 01.AM.0009.L
Self-locking nut compatible with all Ohvale GP-0 models and for the GP-2 wheel axle.
Reference: 03.TE.0180.L
Brand: Ohvale
Ohvale front arch painted. Ohvale code: 03.TE.0180.L Ohvale front fairing support, new version. Compatible with all versions of Gp-0, Gp-0 EVO and Gp-2. Attention: The new Ohvale front fairing support replaces the previous code 01.TE.0007.L Attention: to mount the Alfano instrumentation, you need to take the support code: 03.TE.0190.L
Reference: 01.TE.0006.L
Brand: Ohvale
Galvanized U-bolt for Gp-0 and Gp-1 rear shock absorber fixing. Ohvale code: 01.TE.0006.L
Reference: 01.AM.0010.L
Brand: Ohvale
Ohvale washer M14 flat M14 D.15X28X2,5. Ohvale code: 01.AM.0010.L
Reference: 01.AM.0008.L
Brand: Ohvale
Ohvale shock absorber length adjustment spacer. Ohvale code: 01.AM.0008.L Compatible for all Ohvale GP-0 and GP-2 models.
Reference: 01.TE.0026.L
Brand: Ohvale
Ohvale GP-0 and GP-2 chassis and body clip kit. Ohvale code: 01.TE.0026.L
Reference: 01.MO.0006.L
Brand: Ohvale
M8x110 screw for Ohvale lower motor attachment. Ohvale code: 01.MO.0006.L For all Ohvale GP-0 and GP-2 models.
Reference: 01.MO.0009.L
Brand: Ohvale
M8x120 screw for Ohvale upper motor attachment. Ohvale Code: 01.MO.0009.L For all Ohvale GP-0 and GP-2 models.
Reference: 01.TE.0305.L
Brand: Ohvale
Original yellow MY26 frame for Ohvale GP-0 160 EVO. Codice Ohvale: 01.TE.0305.L The frame is not an item intended for generic replacement but a component sold only in case of damage that makes the previous frame unusable. it is therefore possible to purchase it only and exclusively after returning the damaged "old frame".
Reference: R03.TE.0003.L
Brand: Ohvale
Ohvale Gp-0 Evo Gp-2 seat support frame. Ohvale code: R03.TE.0003.L Seat support frame compatible with Ohvale Gp-2 and Ohvale Gp-0 110 4S EVO and 160 EVO.
Reference: 03.TE.0009.L
Brand: Ohvale
Ohvale Gp-0 evo Gp-2 rear engine mount. Ohvale code: 03.TE.0009.L
Reference: 03.TE.0020.L
Brand: Ohvale
Ohvale Gp-0 evo Gp-2 lower engine mount. Ohvale code: 03.TE.0020.L
Reference: 01.TE.0041.L
Brand: Ohvale
Front engine mount Ohvale 110 4S EVO 01.TE.0041.L
Reference: 01.TE.0040.L
Brand: Ohvale
Ohvale 160 4S EVO front engine mount. Ohvale code: 01.TE.0040.L Front engine mount for mounting the Ohvale 160 cc 4t 4S engine, metal mount, light and resistant, suitable for GP-0 EVO, and GP-2. Front engine mount gp-2 160 cc. Front engine mount gp-0 EVO 160 cc.
Reference: 01.MO.0055.L
Brand: Ohvale
Rear engine connection washer Ohvale Gp-0 160 4S. Ohvale code: 01.MO.0055.L Rear engine connection washer Ohvale Gp-0 160 4S. Rear engine attachment washer Ohvale Gp-0 Evo 160 4S.
Reference: 1150.82.52.06
Brand: Domino
Domino cross 1150 grips. Pair of Off-road grips. Special finish with raised area in the back. Material: Thermoplastic rubber Length: right 120 mm / left 123 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Grooves for iron wire: 2-3 slots Flange diameter: 60 mm Handle diameter Knob mounted: 30/32 mm
Reference: 144.145.002
Brand: POLINI
Polini Z18 bearing clutch bell. Polini Code: 144.145.002
Reference: 01.SD.0409.L
Brand: Ohvale
Ohvale Crank case LH 4 speed Code: 01.SD.0409.L
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub internal spacer
Reference: 7717313B
Brand: Malossi
Malossi Power Up clutch bell for Vespa Ø 109.5 mm. Code 7717313B. Reinforced and race-ready. Compatible with PX and COSA 2 models.
Reference: 317.0105
Brand: POLINI
Honda Nsr 125 head stud size 7x69 mm. Polini Code: 317.0105 Honda head stud for: Honda, Honda Nsr 125
Reference: 204.0190/D
Brand: POLINI
Motobecane piston 46 mm, selection D. Polini code: 204.0190 / D
Reference: 01.AS.0311.L
Brand: Ohvale
Ohvale Slide 50 Code: 01.AS.0311.L
Reference: 6117005
Brand: Malossi
Malossi X K belt for Piaggio Bravo Superbravo variator 50 cc 13x6.5x1056 mm angle 30 Malossi code: 6117005 Malossi belt for PIAGGIO BRAVO 50 2T. Malossi belt for PIAGGIO SUPERBRAVO 50 2T.
Reference: 104089
Brand: Motul
Motul 7100 4T 10W-30 104089 oil. For high performance 4-stroke engines of sports bikes, road, trial, off-road, enduro, etc., with or without integrated gearboxes and wet and non-wet clutches. For engines compliant with the regulations relating to the regulation of polluting emissions, Euro 2, 3, 4 or 5 and equipped with exhaust gas post-treatment systems:...
Reference: TCMKITFR86M8
Brand: Tecnominimoto
TCM 86 mm complete clutch kit for minimoto engines. Fits Iame, BZM, CS, SG, TCM. Includes racing shoes, springs, bell, and hub.
Reference: EK520SRXL120
Brand: EK (Enuma Chain)
EK EK520SRXL motorcycle chain 120 links. Chain for motorcycles, 420 pitch, 120 links long, QX-RING SRXL (Thin) version. Recommended for motorcycles up to 650 cc and maximum 80 HP, combined with MLJ joint (Joint to be riveted). Cutting-edge technology: EK's zero-stretch technology eliminates chain stretch during the first 1000km of use. ZST eliminates the...
Reference: 001002R017F0
Brand: DM
Aluminum rear mechanical brake caliper support kit for minimoto Dm. Code: 001002R017F0
Reference: 5518548B
Brand: Malossi
Malossi Digitronic code 5518548B digital electronic control unit Malossi electronic digital Digitronic control unit for 2T 50 CC euro 4-5 vehicles.
Reference: 215.0271
Brand: POLINI
Single reed intake manifold diameter 19 mm Shbc for Ape 50, code 215.0271 Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL For SHBC 19.19 Ape carburetor Carburetor connection diameter 23 mm
Reference: 174.0035
Brand: POLINI
Original Polini brake pads 53.9x50.9x7.3 mm Code 174.0035 These pads are applicable as a replacement to replace the original pads for: Aprilia Scarabeo 400 brake pads, Aprilia Rs 50 brake pads from 2006 (Derbi D50B), Derbi GP1 50 Euro2 brake pads, Derbi GP1 50 Open brake pads, Derbi GP1 50 brake pads Race since 2005, Derbi Gpr 50 Nude brake pads, Derbi...
Self-locking nut M14x1.5 Ohvale. Ohvale Code: 01.AM.0009.L
Self-locking nut compatible with all Ohvale GP-0 models and for the GP-2 wheel axle.