- Reduced price
- New

Xmotorstore Payments
Hjc i80 helmet.
"APC" Advanced Polycarbonate Compound: By blending premium polycarbonate with high impact resistant ABS in an optimal ratio, HJC has developed a strong and impact resistant shell, while maintaining a lightweight design.
"ACS" Advanced Channeling Ventilation System: 2-level upper vents and lower vents; Full front to back airflow expels heat and humidity from the helmet.
Pinlock Ready HJ-44 VISOR: Offers 99% UV protection, with anti-scratch coating.
The wind tunnel tested peaks VISOR and fine-tuned with advanced computational fluid dynamics (CFD) programs, guarantee maximum stability and reduction of aerodynamic resistance,
even at high speeds
Dark Smoke sun visor installed
Interior parts: Breathable and dry
3D contoured cheek pads for maximum comfort
Crown and cheek pads: Removable and washable
Cheek pads: Interchangeable in all sizes
Glasses grooves: Accommodates riders with prescription glasses
Comes standard with Pinlock and Chin Curtain.
Hjc i80 helmet.
"APC" Advanced Polycarbonate Compound: By blending premium polycarbonate with high impact resistant ABS in an optimal ratio, HJC has developed a strong and impact resistant shell, while maintaining a lightweight design.
"ACS" Advanced Channeling Ventilation System: 2-level upper vents and lower vents; Full front to back airflow expels heat and humidity from the helmet.
Pinlock Ready HJ-44 VISOR: Offers 99% UV protection, with anti-scratch coating.
The wind tunnel tested peaks VISOR and fine-tuned with advanced computational fluid dynamics (CFD) programs, guarantee maximum stability and reduction of aerodynamic resistance,
even at high speeds
Dark Smoke sun visor installed
Interior parts: Breathable and dry
3D contoured cheek pads for maximum comfort
Crown and cheek pads: Removable and washable
Cheek pads: Interchangeable in all sizes
Glasses grooves: Accommodates riders with prescription glasses
Comes standard with Pinlock and Chin Curtain.
Reference: A2103
Brand: Alfano
45 cm M5 water temperature sensor A2103. This NTC technology sensor with a 5mm metric thread can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: 30104203
Brand: HJC
HJC RPHA 12 Visor. Visor for Hjc Rpha 12 full face helmet in various colors. Visor model: HJ-42. Available rpha 12 visor colors: HJC RPHA 12 visor transparent. HJC RPHA 12 visor smoke. HJC RPHA 12 visor dark smoke. HJC RPHA 12 visor red. HJC RPHA 12 visor blue. HJC RPHA 12 visor gold. HJC RPHA 12 visor silver. Replacement visor for original HJC RPHA 12...
Reference: 8.479.899.790
Brand: ZECA
With the ZECA EV cable reels with wallbox it is possible to recharge electric vehicles with minimal effort, keeping in ordering the garage and protecting the cables from wear. Available with Type 1 and Type 2 connectors The Type 1 connector is the North American and Japanese standard, but is very widespread on vehicles (it is not usually installed on...
Reference: 5319440
Brand: Malossi
Malossi Rhq crankshaft for Piaggio mopeds 5319440 Malossi code: 5319440 Malossi Rhq crankshaft with 10 mm diameter pin and 43 mm stroke 5319440
Reference: 950.830.031
Brand: POLINI
Hi-Speed e-bike Bosch active line-performance line-cx, code 950.830.031 Hi-Speed e-bike for: Bosch e-bike active line, Bosch performance line, Bosch cx Magnet code 950.870.001
Reference: 215.0162
Brand: POLINI
Intake manifold Vespa Pk Ets Xl Hp 24mm 3 holes. Polini Code: 215.0162
Reference: 3118570
Brand: Malossi
Malossi cast iron cylinder kit diameter 46.5 with 10 diameter pin Malossi code: 3118570 Malossi cylinder kit for PIAGGIO BOSS 50 2T. ATTENTION: BORING THE ORIGINAL CRANKCASE. Malossi cylinder kit for PIAGGIO BOXER 50 2T. ATTENTION: BORING THE ORIGINAL CRANKCASE. Malossi cylinder kit for PIAGGIO BRAVO 50 2T. ATTENTION: BORING THE ORIGINAL CRANKCASE....
Reference: 282.0004
Brand: POLINI
APRILIA: RX-SX 50 dal 2006-> (DERBI D50B) - RS 50 dal 2006 -> (DERBI D50B) - RS4 50 (DERBI D50B)BULTACO: ASTRO 50 - LOBITO 50DERBI: GPR 50 - GPR 50 Nude - GPR 50 RACING - GPR 50 racing dal 2006-> (DERBI D50B) - SENDA 50 DRD R - SENDA 50 DRD SM - SENDA 50 DRD - SM dal 2006-> (DERBI D50B) - SENDA 50 EXTREME - SENDA 50 EXTREME SM - SENDA 50...
Reference: 01.FA.0321.L
Brand: Ohvale
Ohvale LH CNC fork foot dd fork EVO Code: 01.FA.0321.L
Reference: A2502-Pack
Brand: Alfano
Alfano LSU 4.9 Lambda Probe A2502-Pack. New Alfano lambda probe: This LSU 4.9 wideband lambda probe measures the air/fuel ratio continuously, both at low and high speeds (RPM). Very useful for quickly finding the best engine performance. Requires a 12V DC power supply (battery). Connects to the black port (BUS) of the ALFANO 7 or to the orange port of the...
Reference: LEO4A6201
Brand: CAPIT
17 inch Capit Maxima Leo tire warmers with Leo4 control unit 17 inch Capit Maxima Leo tire warmers. Motorcycle tire warmers, motard tire warmers. Temperature control with Leo connector. The temperature comes in a range of 40 to 120 ° C (104 to 248 ° F). The Capit Maxima Leo motorcycle electric blankets are made with a connector for connection to Capit...
Reference: 203.0129
Brand: POLINI
Gilera Runner 50cc air filter 203.0129
Reference: 174.0187
Brand: POLINI
Rieju brake pads Code: 174.0187 Application: Rieju, Rieju Mrt, AM6 supermotard
Reference: 6116215
Brand: Malossi
Malossi X K belt strap for maxi scooter 18.8x10.6x814 mm angle 28 Malossi code: 6116215 Malossi belt for APRILIA LEONARDO 125 4T LC Malossi belt for APRILIA LEONARDO 150 4T LC Malossi belt for APRILIA SCARABEO 125 4T LC (ROTAX) Malossi belt for APRILIA SCARABEO 150 4T LC (ROTAX) Malossi belt for APRILIA SCARABEO 200 4T LC (ROTAX) Malossi belt for BETA...
Reference: M088S14-B00
Brand: PMT TYRES
Tire Pmt 90 / 60R6.5 hard B ROAD, only for racing use. Tire for electric and mini scooters, long life and reliability. Tire used on scooters such as the wolf warrior and many others. Code: M088S14-B00
Reference: 02 6183B
Brand: Malossi
Malossi inclined 21x24 mm intake manifold 02 6183B Code: 02 6183B Malossi inclined intake manifold
Hjc i80 helmet.
"APC" Advanced Polycarbonate Compound: By blending premium polycarbonate with high impact resistant ABS in an optimal ratio, HJC has developed a strong and impact resistant shell, while maintaining a lightweight design.
"ACS" Advanced Channeling Ventilation System: 2-level upper vents and lower vents; Full front to back airflow expels heat and humidity from the helmet.
Pinlock Ready HJ-44 VISOR: Offers 99% UV protection, with anti-scratch coating.
The wind tunnel tested peaks VISOR and fine-tuned with advanced computational fluid dynamics (CFD) programs, guarantee maximum stability and reduction of aerodynamic resistance,
even at high speeds
Dark Smoke sun visor installed
Interior parts: Breathable and dry
3D contoured cheek pads for maximum comfort
Crown and cheek pads: Removable and washable
Cheek pads: Interchangeable in all sizes
Glasses grooves: Accommodates riders with prescription glasses
Comes standard with Pinlock and Chin Curtain.