- On sale!
- Reduced price
- New

Xmotorstore Payments
Dellorto gas valve for PHBG
Available: PHBG 30 gas valve - PHBG 40 gas valve - PHBG 50 gas valve - PHBG 60 gas valve
select the number between: 30 - 40 - 50 - 60
Reference: 0959600 21
Brand: DELLORTO
Dellorto conical pin clip. 9596-21. Clip for needle PHBG and SHA carburetor. Diameter 5.5 mm. The Dellorto clip is used to hold the pin in place in the height adjustment cleat. Dellorto Code: 0959600 21
Reference: 9595 x 08
Brand: DELLORTO
Conical needle W Dellorto, universal needle for Phbg and other carburetors. Select the desired size, pins w1 to w26 available Dellorto Code: 9595x08
Reference: 52526-77
Brand: DELLORTO
The phbg gasket kit includes: phbg tank gasket, phbg tank cap gasket, air screw oring, double screw carburetor closing gasket, and phbg screw cap gasket. Dellorto Code: 52526-77
Reference: 215.0435
Brand: POLINI
Intake manifold Vespa 125 3 holes for 28mm carburetor. Polini Code: 215.0435 Engine crankcase with 3-hole manifold attachment, but mounted on Primavera ET3 frame.
Reference: 215.0428
Brand: POLINI
Intake manifold Minarelli AM6-DERBI diameter 30 Dellorto 360 °. Polini Code: 215.0428 APRILIA : AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 dal 2006 -> (DERBI D50B) - RS 50 MINARELLI AM6 - RS4 50 (DERBI D50B) - RX 50 MINARELLI AM6 - RX-SX 50 dal 2006-> (DERBI D50B) - TUONO 50 Minarelli AM6 BETA : RR 50 AM6 (1999-2002) - RR 50 ENDURO, MOTARD...
Reference: 6413x02
Brand: DELLORTO
Maximum Dellorto 6mm jet for carburetors PHVA PHVB PHBL PHBN PHBH PHBE PHF PHSB VHSB VHSBracing VHSC VHSH VHST PHM
Reference: 223.0120
Brand: POLINI
Intake sleeve Vespa Px Pe 125cc 200cc 2t diameter 34mm length 33mm. Polini code: 223.0120
Reference: 01.SB.0118.L
Brand: Ohvale
Ohvale Inlet pipe gasket 110A Code: 01.SB.0118.L
Reference: 02 4918B
Brand: Malossi
Malossi intake manifold 20 mm 02 4918B Code: 02 4918B Malossi intake manifold for Vespa Pk 50
Reference: 1610690
Brand: Malossi
Malossi phbl 25 bs fuel system for Vespa et3 primavera 125cc 2T with 1st series cylinder. Code: 1610690 Application: Malossi fuel system for Vespa ET3 Primavera 125 2T to combine only with thermal unit 31 5260. Malossi fuel system for Vespa Primavera 125 2T to combine only with thermal unit 31 5260.
Reference: 203.0036
Brand: POLINI
Polini short air box. Available in the variants: 203.0036 filter for Phbg, measures: 34x63x80 203.0032 filter for Phva, measures: 36x60x80 203.0040 filter for Phbl, measures: 39x63x80
Reference: 201.1704
Brand: POLINI
Polini carburetor for Vespa 50 diameter 17.5. Polini Code: 201.1704 It is mounted on the original Piaggio manifold and union d.16.16. (21.6x26.5) Maximum jet 76 Minimum Jet 42 Needle 14/22 24x30 valve Pulverizer bush d.2,6
Reference: 5519749
Brand: Malossi
Malossi Force master 2.1 electronic control unit 5519749 for Yamaha Malossi code: 5519749 The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication...
Reference: 203.0034
Brand: POLINI
Polini short air box. Available in the variants: 203.0034 filter for Phbg, measures: 32x95x80 203.0030 filter for Phva, measures: 36x95x80 203.0038 filter for Phbl, measurements: 39x95x80
Reference: 14351x28
Brand: DELLORTO
FQ emulsifier pulverizer Dellorto
Reference: 343.0400
Brand: POLINI
Polini Cp carburetor gas valve: 343.0400 carburetor gas valve CP D.24-30 degrees 343.0401 carburetor gas valve CP D.24-40 degrees 343.0402 carburetor gas valve CP D.25-30 degrees 343.0403 CP carburetor gas valve D.25-40 degrees 343.0404 carburetor gas valve CP D.24-50 degrees
Reference: 5518988B
Brand: Malossi
Lambda O2 Malossi controller 5518988B emulator Code: 5518988B The use of the new O2 controller allows the management of the carburetion in the area where the Lambda probe controls the title of the fuel-air mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a different value from the stoichiometric...
Reference: 215.0452
Brand: POLINI
Polini 360 ° intake manifold sleeve diameter 35mm. Polini Code: 215.0452
Reference: 316.0106
Brand: POLINI
Manual carburetor feed pump 6.5 cm body 316.0106
Dellorto gas valve for PHBG
Available: PHBG 30 gas valve - PHBG 40 gas valve - PHBG 50 gas valve - PHBG 60 gas valve
select the number between: 30 - 40 - 50 - 60