Xmotorstore Payments
Malossi Force master 2.1 electronic control unit 5519814 for Honda
Malossi code: 5519814
The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for managing vehicle performance: without functional limitations, it allows you to push the engine beyond the barrier of the original rev limiter.
Technical data
-Carburetion adjustment
-± 14% at min/average/max
-Rev limiter: +800 RPM
-Temperature range = -30°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <-200mA
-Environmental protection = IP65
2 different mappings:
-curve 0: original exhaust, Malossi cylinder, original head, original cams, original filter
-curve 1: Malossi exhaust with DB killer, Malossi cylinder, original head, original cams, original filter
Malossi control unit for:
Malossi control unit for Honda Forza 125 ie 4T LC euro 3 <-2016 (JF60E) attention: mount exclusively with the Malossi cylinder art. 3117096.
Malossi control unit for Honda Forza 125 ie 4T LC euro 4 2017->2020 (JF69E) attention: mount exclusively with the Malossi cylinder art. 3117096.
Reference: 244.112
Brand: POLINI
Fixed half-pulley Aprilia Leonardo 125 150cc. Polini Code: 244.112 APRILIA: LEONARDO 125 - LEONARDO 150 - SCARABEO 125 - SCARABEO 150
Reference: 203.0133
Brand: POLINI
Peugeot Buxy 50cc 2t air filter. Polini Code: 203.0133
Reference: 01.SW.0813.L
Brand: Ohvale
Ohvale Screw M6x10 Code: 01.SW.0813.L
Reference: 5515735
Brand: Malossi
Lambda emulator TC UNIT O2 Malossi controller 5515735 Code: 5515735 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is constant,...
Reference: 01.SD.0113.L
Brand: Ohvale
Ohvale Gasket tansioner cam chain Code: 01.SD.0113.L
Reference: 143.305.010
Brand: POLINI
Set of screws and nuts for Polini minimoto frame and fairings. Polini code: 143.305.010 The Polini minimoto screw kit includes: Polini minimoto fairing screws 910. Polini minimoto frame screws 910. Set of screws for Polini minimoto model 910, generic. Attention generic kit for 910, 910 S, 910 RS, may not contain some variants.
Reference: 01.SD.0902.L
Brand: Ohvale
Ohvale Bolt cross M6x35 Code: 01.SD.0902.L
Reference: 3118669
Brand: Malossi
Malossi BIG DEPS 4 MHR cylinder diameter 47 in aluminum with pin diameter 12 for Piaggio mopeds Malossi code: 3118669
Reference: 01.SB.0602.L
Brand: Ohvale
Ohvale Cover primary clutch Code: 01.SB.0602.L
Reference: 6714774
Brand: Malossi
Malossi HTQ secondary gears z 15 / 42 6714774 Malossi code: 6714774.
Reference: 248.118
Brand: POLINI
Polini variator belt for Yamaha Cygnus 125 Code: 248.118 Application: Mbk, Mbk Flame 125 X, Mbk Waap 125, Yamaha, Yamaha Cygnus X 125 4T Carburetor / X 125i 4t, Yamaha Vity 125
Reference: 4615432
Brand: Malossi
Malossi Rs1 rear shock absorber 4615432 Malossi code: 4615432 Malossi rear shock absorber Rs1 wheelbase 320 mm. Wheelbase increased by 35 mm. This range of suspensions was born from the desire to offer our loyal customers a series of superior class products, which guarantee great ride comfort together with unparalleled driving safety. These special shock...
Reference: 211.0245
Brand: POLINI
Yamaha Mbk Booster 47 mm head with or. Polini Code: 211.0245. Aprilia Amico 50 cylinder head. Aprilia SR 50 cylinder head Italjet cylinder head Italjet Pista 50 cylinder head Italjet Bazooka 50 cylinder head Lem Flash 50 cylinder head Mbk Booster 50 cylinder head Cylinder head Mbk Sorriso 50 Mbk Stunt 50 cylinder head Mbk Target 50 cylinder head Yamaha...
Reference: TCM60024
Brand: Tecnominimoto
Screw and bushing kit for Dm and Grc minimoto discs. Anti-unscrewing minimoto disc screw kit, it can also be used on hubs with stripped thread, thanks to the practical nut to be positioned on the inside of the disc. The disc screw kit is compatible with: Dm, Grc, Phantom.
Reference: 6116267
Brand: Malossi
Fixed Pulley Malossi MHR Aluminum Malossi Code: 6116267
Malossi Force master 2.1 electronic control unit 5519814 for Honda
Malossi code: 5519814
The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for managing vehicle performance: without functional limitations, it allows you to push the engine beyond the barrier of the original rev limiter.
Technical data
-Carburetion adjustment
-± 14% at min/average/max
-Rev limiter: +800 RPM
-Temperature range = -30°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <-200mA
-Environmental protection = IP65
2 different mappings:
-curve 0: original exhaust, Malossi cylinder, original head, original cams, original filter
-curve 1: Malossi exhaust with DB killer, Malossi cylinder, original head, original cams, original filter
