Xmotorstore Payments
Dellorto conical pin clip. 9596-21. Clip for needle PHBG and SHA carburetor. Diameter 5.5 mm. The Dellorto clip is used to hold the pin in place in the height adjustment cleat.
Dellorto Code: 0959600 21
Dellorto conical pin clip. 9596-21. Clip for needle PHBG and SHA carburetor. Diameter 5.5 mm. The Dellorto clip is used to hold the pin in place in the height adjustment cleat.
Dellorto Code: 0959600 21
Reference: 1486 x 02
Brand: DELLORTO
Dellorto maximum jet M5 for Phbg Sha and others carburetors. Size available from 30 to 140.
Reference: 1488 x 02
Brand: DELLORTO
Dellorto idle jet for PHBG and other carburetors. Wide range of Dellorto minimoto jets. Select the desired size from 30 to 70. Dellorto Code: 1488x02
Reference: 9595 x 08
Brand: DELLORTO
Conical needle W Dellorto, universal needle for Phbg and other carburetors. Select the desired size, pins w1 to w26 available Dellorto Code: 9595x08
Reference: 9450x80
Brand: DELLORTO
4 gr float for Dellorto PHBG carburetors. Dellorto replacement suitable for: Float for Phbg 15 Float for Phbg 18 Float for Phbg 19 Float for Phbg 21 Dellorto Code: 9450x80
Reference: 215.0227
Brand: POLINI
Polini intake manifold for Peugeot Spx diameter 17-19mm. Polini Code: 215.0227
Reference: 203.0140
Brand: POLINI
Piaggio Zip 50cc Fast Rider air filter. Polini code: 203.0140
Reference: 02 1331B
Brand: Malossi
Malossi manifold 25 mm for Phbl 23 24 25. Malossi code: 02 1331B
Reference: 13 1012b
Brand: Malossi
Malossi sleeve for PHBE - PHF 30 - 34 carburetors (Height 35 cm) Malossi code: 13 1012b
Reference: 02631
Brand: DELLORTO
Dellorto Phbg 19 ds carburettor Diffuser: 19mm Motor connection: ELASTIC (MALE) ø25 Filter connection: M32 x 1.25mm Air start: MANUAL AIR (CABLE) Compatible with engines: 2 STROKE Connection for mixer Gas valve: 30 Conical needle: W9 Pulverizer: 262 AN Maximum jet: 75 by 5mm Minimum jet: 45 Starter jet: 60 Float: 4 grams
Reference: 13 1433b
Brand: Malossi
Malossi sleeve for PHBH 29 - 30 B carburetors (37 mm) Malossi code: 13 1433b
Reference: 1611028
Brand: Malossi
Malossi phbg 19 as fuel system for Kymco 50cc 1611028 Code 1611028. Application: Malossi fuel system for Kymco Agility R16 50 2T euro 2 (KF10B) Malossi fuel system for Kymco Agility R16 + 50 2T euro 2 2016-> (KF10D) Malossi fuel system for Kymco Dink 50 2T Malossi fuel system for Kymco Dink 50 2T LC Malossi fuel system for Kymco Heroism 50 2T Malossi...
Reference: 5519539
Brand: Malossi
Malossi Force master 2.1 electronic control unit 5519539 for Honda Malossi code: 5519539 The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication...
Reference: 203.1505
Brand: POLINI
Venturi Polini 70mm for PWK 24/26/28/30 carburetor. Polini Code: 203.1504
Reference: 01.AS.0051.L
Brand: Ohvale
Ohvale 160 4S intake manifold. Ohvale code: 01.AS.0051.L Aluminum intake manifold, machined version, for Ohvale ZS 160 cc 4-speed engine (FA 7H). Hole distance: 46 mm. Hole distance: 48 mm. Holes inside: 27mm. Inner holes: 30mm.
Reference: 02 2893
Brand: Malossi
Malossi intake manifold 19x24 mm 02 2893 Code: 02 2893 Malossi intake manifold with 42 mm center distance for Phbg 19 carburetors
Reference: 1313798b
Brand: Malossi
Malossi sleeve diameter 21 MHR in FKM Malossi code: 1313798b
Reference: 215.0450
Brand: POLINI
Polini 360 degree intake manifold sleeve 35mm. Polini Code: 215.0450
Reference: 5515730
Brand: Malossi
Malossi Force Master 3 5515730 electronic control unit with injection for Yamaha Code: 5515730 Malossi Force Master 3 electronic control unit for injection vehicles Technical features: Carburation adjustment ± 14% at LOW / HIGH / MID Rev limiter : + 1000 RPM 8 different mappings Lambda emulator Temperature range = -20°C +80°C Minimum operating voltage =...
Reference: 1611021
Brand: Malossi
Fuel system mhr phbg 19 bs. Malossi code: 1611021. MALOSSI's MHR PHF 34 fuel systems are tailor-made for uprated engines, offering a complete kit with all the necessary accessories for easy assembly. These systems represent excellence in the sector, developed by MALOSSI, a leading company in the design and production of special fuel systems for...
Dellorto conical pin clip. 9596-21. Clip for needle PHBG and SHA carburetor. Diameter 5.5 mm. The Dellorto clip is used to hold the pin in place in the height adjustment cleat.
Dellorto Code: 0959600 21
