Xmotorstore Payments
Polini CP carburetor idle adjustment screw and spring. Polini carburetor air screw available in version:
343.0005 SCREW AND ADJUSTMENT SPRING CARB.CP
343.0006 SCREW AND MINIMUM SPRING CARB.CP 15 (L.23 mm.)
343.0007 SCREW AND MINIMUM SPRING CARB.CP 17.5 / 19 (L.20.7 mm.)
343.0008 SCREW AND MINIMUM SPRING CARB.CP 21/23/24 (L.19.2 mm.)
343.0032 SCREW AND SPRING FOR LONG AIR ADJUSTMENT CARB.CP
343.0033 SCREW AND MINIMUM SPRING CARB.CP 17,5 / 19 LONG (L.28,7 mm.)
343.0034 SCREW AND MINIMUM SPRING CARB.CP 21/23/24 LONG (L.27,2 mm.)
Polini CP carburetor idle adjustment screw and spring. Polini carburetor air screw available in version:
343.0005 SCREW AND ADJUSTMENT SPRING CARB.CP
343.0006 SCREW AND MINIMUM SPRING CARB.CP 15 (L.23 mm.)
343.0007 SCREW AND MINIMUM SPRING CARB.CP 17.5 / 19 (L.20.7 mm.)
343.0008 SCREW AND MINIMUM SPRING CARB.CP 21/23/24 (L.19.2 mm.)
343.0032 SCREW AND SPRING FOR LONG AIR ADJUSTMENT CARB.CP
343.0033 SCREW AND MINIMUM SPRING CARB.CP 17,5 / 19 LONG (L.28,7 mm.)
343.0034 SCREW AND MINIMUM SPRING CARB.CP 21/23/24 LONG (L.27,2 mm.)
Specific References
Reference: getto massimo Polini cp
Brand: POLINI
Polini main jet for Cp Keihin Pwk carburetor (available from 40 to 119)
Reference: 343.0332
Brand: POLINI
Idle jet carburetor Cp Polini. Available in all sizes: Idle jet 32 Polini carburetor Idle jet 34 Polini carburettor Idle jet 36 Polini carburettor Idle jet 38 Polini carburettor Idle jet 40 Polini carburettor Idle jet 42 Polini carburetor Idle jet 44 Polini carburettor Idle jet 46 Polini carburettor Idle jet 49 Polini carburettor Idle jet 52 Polini...
Reference: 343.0015
Brand: POLINI
Cup main jet carburetor Cp Polini. Polini Code: 343.0015
Reference: 343.0017
Brand: POLINI
Cp-Pwk carburetor petrol closing pin. Polini Code: 343.0017
Reference: 343.0750
Brand: POLINI
Polini carburetor air brake jet, available in the following versions: 343.0750 air brake jet CLOSED 343.0751 air brake jet 0.30 343.0752 air brake jet 0.60 343.0753 air brake jet 1.00 343.0754 air brake jet 0.80
Reference: 343.0600
Brand: POLINI
Conical needle Polini Cp 14/22 carburettor. Polini Code: 343.0600
Reference: 343.0601
Brand: POLINI
Conical needle Polini Cp 12/22 carburettor. Polini Code: 343.0601
Reference: 343.0020
Brand: POLINI
Seeger for Polini Cp Pwk carburetor needle. The seeger or clip is used to keep the carburettor needle in position. Polini Code: 343.0020
Brand: POLINI
Jet maximum Polini Cp - Keihin - Pwk
Reference: 01.AS.0016.L
Brand: Ohvale
Ohvale air filter diameter 42 mm. Ohvale code: 01.AS.0016.L Mesh air filter for Ohvale, with 42 mm diameter carburettor inlet.
Reference: 5517964
Brand: Malossi
Lambda Emulator TC UNIT O2 Malossi controller 5517964 for Yamaha Code: 5517964 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is...
Reference: 343.0004
Brand: POLINI
Return valve gas carburetor Cp Polini. Code 343.0004
Reference: AC5100-XRacing
Brand: XRACING
Air filter protective sock. An absolute novelty for the protection of the air filter, the mesh fabric sock allows for greater filtering of the aspirated material, guaranteeing clean air for the engine. The filter sock is handmade in Italy, with the highest quality materials. When to use the mesh on the air filter? - The filter protection can be used in...
Reference: 5519129B
Brand: Malossi
Lambda O2 Emulator Malossi controller 5519129B for Honda Sh Code: 5519129B The use of the new O2 controller allows the management of the carburetion in the area where the Lambda probe controls the title of the fuel-air mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a different value from the...
Reference: 02 2913B
Brand: Malossi
Malossi intake manifold 20x24 mm 02 2913B Code: 02 2913B Malossi intake manifold for Phbg and Shb carburetors
Reference: 203.0054
Brand: POLINI
Long Polini 90 degree air box. Available in the variants: 203.0054 filter for Phbg, measures: 34x130x80 203.0056 filter for Phva, measures: 38x125x80
Reference: 1317188
Brand: Malossi
Malossi throttle body sleeve assembly Malossi code: 1317188
Reference: 215.0362
Brand: POLINI
Piaggio Ciao Si Boss 13 mm intake manifold. Polini Code: 215.0362
Reference: 02696
Brand: DELLORTO
Dellorto phbg 21 ds racing carburetor Code:02696 Mixer connection Pressure port connection Mixer: Yes For 2-stroke engines Independent circuit starting device with wire control Idle system with jet and adjustment screw Maximum system with mechanical adjustment of the mixture by means of a conical needle Aluminum tray with central cap for quick dismantling...
Reference: 02 4957B
Brand: Malossi
Malossi intake manifold 24x 28.6 mm inclined 02 4957B Code: 02 4957B Malossi inclined intake manifold
Reference: 3014909
Brand: Malossi
Malossi transparent float bowl for Dell'Orto PHBL, PHBH, and VHST carburetors. Made of durable, high-quality materials, it allows you to easily visually check the fuel level. Ideal for racing engines and for precise carburetion setup.
Reference: 201.0170
Brand: POLINI
Polini 32 carburettor. Polini code: 201.0170 Air filter attachment d.54 Carburetor sleeve d.40
Reference: 0218493
Brand: Malossi
Malossi intake manifold 20X24 mm 0218493 Code: 0218493 Malossi intake manifold with center distance 42 for Phbg 19 A carburetors
Reference: 02 4593B
Brand: Malossi
Malossi intake manifold 20x24 mm 02 4593B Code: 02 4593B Malossi intake manifold with center distance 35 for Phbg 19.5 A carburetors
Reference: 0411459
Brand: Malossi
Malossi RED FILTER E14 air filter with 32 mm inlet inclined 30° for PHBG 19 and PHBD 14 carburetors. Malossi code: 0411459 Technical data: Filter element in self-extinguishing polyurethane with open cells of 60 P.P. Collar attachment in nitrile rubber. Front protection cap in chromed ABS.
Polini CP carburetor idle adjustment screw and spring. Polini carburetor air screw available in version:
343.0005 SCREW AND ADJUSTMENT SPRING CARB.CP
343.0006 SCREW AND MINIMUM SPRING CARB.CP 15 (L.23 mm.)
343.0007 SCREW AND MINIMUM SPRING CARB.CP 17.5 / 19 (L.20.7 mm.)
343.0008 SCREW AND MINIMUM SPRING CARB.CP 21/23/24 (L.19.2 mm.)
343.0032 SCREW AND SPRING FOR LONG AIR ADJUSTMENT CARB.CP
343.0033 SCREW AND MINIMUM SPRING CARB.CP 17,5 / 19 LONG (L.28,7 mm.)
343.0034 SCREW AND MINIMUM SPRING CARB.CP 21/23/24 LONG (L.27,2 mm.)
