Xmotorstore Payments
Malossi RED FILTER E14 air filter with 32 mm inlet inclined 30° for PHBG 19 and PHBD 14 carburetors.
Malossi code: 0411459
Technical data:
Filter element in self-extinguishing polyurethane with open cells of 60 P.P.
Collar attachment in nitrile rubber.
Front protection cap in chromed ABS.
Malossi RED FILTER E14 air filter with 32 mm inlet inclined 30° for PHBG 19 and PHBD 14 carburetors.
Malossi code: 0411459
Technical data:
Filter element in self-extinguishing polyurethane with open cells of 60 P.P.
Collar attachment in nitrile rubber.
Front protection cap in chromed ABS.
Reference: FB 001
Brand: OMG
Omg petrol filter made in Italy, with 6 mm hose connection.
Reference: 420011
Brand: XRACING
Motorcycle silicone fuel hose for various applications. This petrol hose for carburetor, tank, and other uses, allows maximum curvature without blocking the flow of fuel. These racing fuel hoses are suitable for all vehicles. Fuel pipe size: 1 METER Fuel tube internal diameter: 5.5mm External diameter of fuel pipe: 6mm Available colors: white petrol tube,...
Reference: 02631
Brand: DELLORTO
Dellorto Phbg 19 ds carburettor Diffuser: 19mm Motor connection: ELASTIC (MALE) ø25 Filter connection: M32 x 1.25mm Air start: MANUAL AIR (CABLE) Compatible with engines: 2 STROKE Connection for mixer Gas valve: 30 Conical needle: W9 Pulverizer: 262 AN Maximum jet: 75 by 5mm Minimum jet: 45 Starter jet: 60 Float: 4 grams
Reference: 12026
Brand: LeoVince
Carbon cover alternator Kawasaki ZX 6R Ninja (09/12)
Reference: 02 1827
Brand: Malossi
Pair of Malossi collector 36 mm for Guzzi Vt 750 cc, 850 cc T3, 850 cc Le Mans. Malossi code: 02 1827. For PHF 36 carburetor
Reference: 5512789
Brand: Malossi
Malossi electronic control unit 5512789 Code: 5512789 Malossi electronic control unit for I cylinders - tech
Reference: 282.0006
Brand: POLINI
Vespa 50/125 crankshaft overhaul kit, code 282.0006 Vespa 50/125 crankshaft overhaul kit, cone diameter 20 mm Bearing size: 17x47x14 mm C4 steel-nailed 20x47x14 mm C4 steel-nailed Oil seal dimensions: 20x32x7 mm PTFE + FKM 22.7x47x7 / 7.5 PTFE + FKM Crankshaft overhaul kit for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL, Vespa, Vespa 125 2t pk, Vespa 125...
Reference: 060029
Brand: T4TUNE
Resistance for arrows led 11W 15 Ohms
Reference: 215.0443
Brand: POLINI
Polini 360 ° 35mm intake manifold sleeve. Polini Code: 215.0443
Reference: 5112026
Brand: Malossi
Malossi Multivar 2000 variator 5112026 Code: 5112026 Multivar has great simplicity of application and is easy to intervene. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire shot, linearity of change and a greater mechanical "tranquility" in the march, even at high speeds,...
Reference: 1001 R
Brand: STAMAS
Central frame Stamas SR race factory 2020, the 100% made in Italy competition frame. Suitable for Stamas Midi and Mini minibikes. Total weight: 2,908 kg
Reference: 6114252B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR 2000 variator Malossi code: 6114252B
Reference: 204.0004/A
Brand: POLINI
Sachs 50cc 48mm piston A selection (47.935 mm) 204.0004/A
Reference: 241.737
Brand: POLINI
Polini Variator for Hi-speed Piaggio Liberty 50 4T iGET 241.737 Code: 241.737 Variator supplied with two series of rollers 19x15.5 of 4.3 gr. and 7gr. Rollers: gr. 4.3 Liberty 50 iget Rollers: gr. 7.0 Vespa 50 iget Piaggio euro 3: - Pair the control unit 171.0007 to the variator. Piaggio / Vespa euro 4: - Pair the control unit 171.0009 to the variator....
Reference: 2516403B
Brand: Malossi
Carbon end cap Malossi 2516403B Malossi code: 2516403B Carbon end cap Malossi 2516403B.
Reference: 254.0003
Brand: POLINI
Cylinder base gasket Vespa Px 125 150 cc. Polini Code: 254.0003
Reference: Pmt 10x2,50 R6 e-fire
Brand: PMT TYRES
Pmt E-fire 10x2,50 6 inches. The new generation Pmt rubber for e-scooters, suitable for 6-inch rims. Category: E-Scooters Type: 10 "x 2.50 (R6.0) Design type: Urban Compound hardness: 52 Shore A Rubber width: 65 mm Internal diameter: 155 mm External diameter: 250 mm Design use: Street Use of compound: Universal Rim width: 35-45mm Pressures: 1.2-2.2 Bar /...
Reference: Estrattore-carter-motore-mini
Brand: XRACING
Minibike crankcase puller. New in the minibike tool segment, a new universal minibike crankcase puller. The minibike crankcase puller is compatible with CS Racing engines and others, and is ideal for opening minibike engines without damaging the mounting holes. Puller dimensions: Outer hole spacing: 84 mm. Outer to center spacing: 58.5 mm.
Malossi RED FILTER E14 air filter with 32 mm inlet inclined 30° for PHBG 19 and PHBD 14 carburetors.
Malossi code: 0411459
Technical data:
Filter element in self-extinguishing polyurethane with open cells of 60 P.P.
Collar attachment in nitrile rubber.
Front protection cap in chromed ABS.
