Xmotorstore Payments
There are 8142 products.
Reference: A1411
Brand: Alfano
Alfano infrared sensor USA version A1411. INFRARED sensor USA version 40cm. Designed to read encoded infrared rays from transmitters installed in the USA Note: this item is delivered in the box with the PROIIIevo, ref, A1022 For more information, contact the factory.
Reference: A1401
Brand: Alfano
Alfano A1401 infrared sensor. 40cm infrared sensor. Designed for reading the encoded infrared rays of ALFANO transmitters, ref. A4100 Note: this article is delivered in the box with the PROIIIevo, ref. A1021
Reference: A3501
Brand: Alfano
Extension 250 mm for Alfano magnetic sensor A3501
Reference: A1302
Brand: Alfano
Alfano magnetic sensor 90cm. Designed to pick up magnetic tapes installed on circuits. Alfano code: A1302. Please note: this item comes in the box with the PROIIIevo. Option for ALFANO6
Reference: A4540
Brand: Alfano
Data and charging cable Alfano 6 and 7. Alfano code: A4540. USB cable to download data from the ALFANO 6 and 7, also to charge the battery of the Alfano 6 and 7.
Reference: A4510
Brand: Alfano
Original charging cable for Alfano 6 and Alfano 7. Code A4510. Not suitable for data transfer.
Reference: TCM334
Brand: Tecnominimoto
Cylinder head 50 cc air-cooled with flat piston, compatible with Bzm, Or, Tcm.
Reference: tcm2004
Brand: Tecnominimoto
Minimoto head support compatible with engines: Bzm Tecnominimoto Orioli. The head support includes the silentblock.
Reference: A3406
Brand: Alfano
Special cable 200 cm for 0-5V sensor connections, must be connected to the Lambda input of Box12 A1160. Yellow wire = Ground (GND) Red wire = + 5V Green wire = Sensor signal from 0 to + 5V
Reference: A2401
Brand: Alfano
Alfano steering wheel position sensor. Alfano Code A2401. 80cm FLYING position sensor. This potentiometer sensor is used to measure the position of the steering wheel. Designed for the module: Box12 / Box4Move.
Reference: A2405
Brand: Alfano
Alfano pedal position sensor. Alfano Code A2405. 120cm pedal position sensor. This Hall effect sensor is used to measure the position of the brake or accelerator pedal. Designed for the module: Box12 / Box4Move.
Reference: Ariane-K2Re
Brand: Arianetech
Ariane K2Re was designed in response to the models that are the reference among the current minibikes, but in an electric version. For this reason it is equipped with an electric unit with a maximum power of 6.5 kW (8.5 HP), adjustable in multiple parameters via a USB port that connects to a laptop to adapt to the needs of every rider, from the beginner...
