Distance internal front hub standard

Reference: 143.170.002

Brand: POLINI

Polini minibike water pump 143.170.002

Polini minimoto water pump. Polini code: 143.170.002 Polini water pump for minimoto, the Polini water pump for minimoto is universal for all minimotos with an external pump.

Reference: 228.0002

Brand: POLINI

Exhaust muffler spring, short (56mm) 228.0002

Spring for short muffler (56mm). The muffler spring is universal. Code: 228.0002

Reference: GHR 501.002

Brand: GHR

40cc air Ghr engine (without carburetor and filter)

40cc air Ghr engine (without carburetor and filter). 40cc air Ghr engine including complete marmiatta, the engine does not include the carburetor. Ghr minimoto engine complete with muffler, silencer. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes.

Reference: 5014

Brand: STAMAS

Water pump support bracket rear Stamas

Stamas rear water pump support bracket

Reference: 111A

Brand: DM

Dm minimoto swingarm pads 2 pieces

Dm minimoto swingarm pads 2 pieces. New Dm pads for aluminum swingarm. The pads must be mounted exclusively with the 2025 chain tie rods, product code 111. This 2025 update of the Dm minimoto, improves the protection of the minimoto, without altering its performance and ease of adjustment.

Reference: FRZ.LEM

Brand: Lem motor

Universal chinese minibike clutch

Clutch for Chinese minimoto, universal clutch for minimoto. The centrifugal clutch 3 high-strength masses for minimoto china is compatible with all Chinese models. Chinese clutch sizes: Outer diameter: 75mm Total thickness: 24mm Central conical hole: from 14 to 12 mm

Reference: 143.340.025

Brand: POLINI

Engine support bracket Polini 143.340.025

Polini minimoto engine support bracket, in metal, with rubber silentblocks and metal coupling. Head fixing holes center distance 55 mm. Central pin passage hole 8 mm. Polini Code: 143.340.025

Reference: KOYO 60002

Wheel Bearings minimoto racing KOYO 10x26x8

KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.

Reference: 5007P

Brand: STAMAS

Rear hub Stamas factory for pulley

Stamas factory rear hub for pulley including spacer and bearings.

Reference: 143.360.001

Brand: POLINI

Fixing clamp steering shock absorber 143.360.001

Fixing clamp steering shock absorber 143.360.001

Reference: LAM.004

Brand: CS Racing

Minibike reeds in carbon Cs

Minibike reeds in carbon Cs

Reference: 144.310.001

M6 nut fixing Polini minimoto cylinder 144.310.001

M6 nut securing the Polini minimoto cylinder. Polini Code: 144.310.001 Nut for securing the Polini minimoto cylinder to the crankcase studs.

Reference: 001002SP1280

Brand: DM

Kit factory Dm stickers

Dm factory minimoto stickers kit. Graphic version for official Dm minibike. ATTENTION: THE STICKERS CAN BE MODIFIED BY DM TELAI WITHOUT NOTICE FOR BETTER AESTHETICS AND/OR SPONSOR NEEDS, XMOTORSTORE IS COMMITTED TO ALWAYS PROVIDE THE MOST UPDATED VERSION.

Reference: 143.002.004

Brand: POLINI

Engine minibike air 4,2 hp Polini 143.002.004

Polini air-cooled minibike engine 4.2 hp, 40cc 2t displacement. Polini code: 143.002.004. The Polini 4.2 hp engine can be installed on all Italian mini-bikes, such as Dm, Grc, Stamas.

Reference: 053

Brand: DM

Engine stop minimoto double cable

Universal Dual Cable mini-bike off button, compatible with all mini-bikes. This switch can be installed on any handlebar with a diameter of 22 mm 7/8 inches, it is effective for turning off the minimoto with a simple button. Cable length 80cm. Cables already prepared for Selettra and Polini minibike coil attachment.

Reference: 112.252.27

Brand: GRC

Nylon washers 10 pieces Grc

Nylon washers 10 pieces Grc