- On sale!
- Reduced price
- New
Xmotorstore Payments
Pair of minimoto footpegs with advancement. For minibikes: Dm, Grc, Stamas, Blata, Polini.
Reference: 143.763.005
Brand: POLINI
Universal mini bike pedals, the mini bike footpegs are made of resistant and non-slip plastic material. The footpegs are compatible with Polini, Stamas, Grc, Dm, and many others. Easy assembly, compatible with all Italian minimoto footpeg supports.
Reference: 122
Brand: DM
Forward platforms supports DM in c.n.c. 2 pieces, glossy ox color. The Dm footrest supports with advancement allow you to extend your legs more in the riding position.
Reference: pastiglie-stamas-mecc
Brand: STAMAS
Brake pads for Stamas mechanical caliper.
Reference: 112.284.12
Brand: GRC
Radiator Bushing + Anti-Vibration Rubber Grc 112.284.12 Grc Code: 112.284.12 Radiator Bushing + Anti-Vibration Rubber Grc
Reference: 143.025.002
Brand: POLINI
Segment diameter 36x1 mm for Polini minimoto 40cc air and h2o. Polini code: 143.025.002
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: GHR 058.001
Brand: GHR
Ghr exhaust manifold for 50cc engine
Reference: 2036 7 18NC
Brand: PBR
M10 Z7 reinforced minimoto sprocket compatible with bell: Xracing CS Iame BZM GHR
Reference: reg.for.dm
Brand: DM
Pair of adjusters for minibike swingarm DM up to 2007. Mechanical adjusters for minibike swingarm in mini and midi version.
Reference: TCM K2012
Brand: Tecnominimoto
TCM masses diameter 86mm. The spoking of the mass body increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has also obtained excellent performance on official motorcycles, now different from the 86 bells. Currently the best on the market for duration, yield, and gluing. Recommended 2.6 mm springs...
Reference: 5009
Brand: STAMAS
Bushings kit for front Stamas floating disc.
Reference: 093+094-Dm
Brand: DM
Minibike fairing set Dm. Dm midi minibike fairing kit, consisting of saddle and front fairing Dm, in raw resin. The kit is original DM, and made of top quality material on the market. Attention, the kit does not include the mudguards and the fairing, and it is not painted.
Reference: 143.765.012
Brand: POLINI
Complete rear right hydraulic brake for Polini GP5 and GP6 minimoto. Original Polini component – code 143.765.012.
Reference: Pcc-Lam-Zocchi
Brand: Zocchi
Zocchi minibike reed valve pack. Universal minimoto reed valve pack with Kevlar lamellas. The Zocchi reed valve pack is compatible with Iame, Cs, Ghr, Bzm, Polini (6.2). To be used for racing engines.
Reference: 143.740.006
Brand: POLINI
Aluminum support for mini bike tail Polini 910 Rs. Polini Code: 143.740.006
Reference: 143.000.260
Brand: POLINI
Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...
Reference: GHR 016.001
Brand: GHR
GHR factory crankcase. For GHR 50cc and 40cc engine. (compatible with bzm). The first to be designed with an engine casing that allows the clutch unit to be cooled in the best possible way, the main cause of the detachment or breakage of the masses. Particular attention has also been given to the cooling of the ignition unit, because the neodymium magnets...
Reference: 4667 54 L
Brand: DM
DM minimoto sprocket in ergal with 5 holes, new version. Crown dedicated only for Dm minibikes.
Pair of minimoto footpegs with advancement. For minibikes: Dm, Grc, Stamas, Blata, Polini.