Xmotorstore Payments
Complete spring tie rods for 2 mass clutch. Polini code: 143.705.009.
Complete spring tie rods for 2-mass clutch for pocket bikes.
Complete spring tie rods for 2 mass clutch. Polini code: 143.705.009.
Complete spring tie rods for 2-mass clutch for pocket bikes.
Reference: 143.255.001
Brand: POLINI
Polini spring set for mini-bike clutch, the mini-bike clutch spring kit contains 3 pairs of springs, yellow, red, black. Code: 143.255.001
Reference: 245.076
Brand: POLINI
Polini speed clutch 2G evo 3 mini bike clutch springs set. Polini Code: 245.076 2G EVO 3 Ø turn engagement: 2.1: 7,000 -> 8,000 2.3: 8,000 -> 9,000
Reference: 143.705.008
Brand: POLINI
Pair of Polini minimoto clutch shoes. The Polini shoes are compatible with the original Polini clutch, but also on Italian clutches such as bzm, cs, and others. Use Polini clutch shoes in a range from 6500 to 9000 rpm, only after careful running-in. Polini Code: 143.705.008 Ean: 8054705021091 Plate pin connection diameter: 6 mm Tie rod fixing pin...
Reference: SIL.001
Brand: XRACING
60mm tubular carbon for Xracing silencer. Replacement for XRacing minimoto silencer.
Reference: 017010
Brand: BZM
Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).
Reference: 143.750.027
Brand: POLINI
Original rear brake hose by Polini for GP5 minimoto. Compatible with AJP hydraulic brake system. High-performance racing spare part.
Reference: 143.600.003
Brand: POLINI
Polini reverso minibike coil. Original coil for Polini reverse engine. Code: 143.600.003
Reference: 143.750.005
Brand: POLINI
Polini 910 RS minimoto front brake caliper. Polini Code: 143.750.005 Polini 910 RS hull minimoto brake caliper, compatible with 5-inch and 6.5-inch versions.
Reference: 8006
Brand: STAMAS
Pair of bushings for motor fixing on midi Stamas frame
Reference: 1015
Brand: STAMAS
Pair support platforms Stamas aluminium midi
Reference: GHR 026.001
Brand: GHR
Roller cage for Ghr big end. Roller cage measures 14X18X10 mm (shaft axis side).
Reference: 2000201
Brand: Tecnominimoto
Replacement bit for minimoto chain breaker. Bit for Tcm, Grc and Zocchi chain breaker. The bit of the minimoto chain breaker is the essential part for using the opening function.
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 100
Brand: DM
Stainless steel spacers kit for rear hydraulic caliper support Dm.
Reference: 143.465.001
Brand: POLINI
Air filter for Polini minimoto, the filter is compatible with the SHA 14 carburettor. Polini code: 143.465.001
Reference: 143.315.001
Brand: POLINI
Minibike piston pin lock 10x0.8 form A. Polini code: 143.315.001 Pin clip for minibike piston pin, universal, with diameter 10x0.8 and shape A.
Complete spring tie rods for 2 mass clutch. Polini code: 143.705.009.
Complete spring tie rods for 2-mass clutch for pocket bikes.
