Xmotorstore Payments
Polini h2o minibike head with long thread
Code: 143.015.011
Polini h2o minibike head with long thread
Code: 143.015.011
Reference: 143.215.001
Brand: POLINI
Series of Polini studs fixing h2o cylinder Length: 98mm Diameter: 6 mm Code: 143.215.001
Reference: 143.034.002
Brand: POLINI
6.2 hp engine gasket kit Polini. Gaskets for 6.2 hp engine air and liquid minimoto. Minimoto Polini engine Gasket kit. Polini code: 143.034.002
Reference: GHR 014.002
Brand: GHR
Gasket kit oring cylinder Ghr 50cc
Reference: Pistone Ghr 50cc
Brand: GHR
Ghr piston for 50cc engines. Original Ghr piston for 50cc 2t racing engine, the piston is available in the following sizes: Ghr A piston 39.95. Ghr B piston 39.96. Ghr C piston 39.97. Ghr D piston 39.98. Select the desired size.
Reference: 143.255.001
Brand: POLINI
Polini spring set for mini-bike clutch, the mini-bike clutch spring kit contains 3 pairs of springs, yellow, red, black. Code: 143.255.001
Reference: 001002SP095D
Brand: DM
Rear wheel pin for aluminum swingarm Dm
Reference: GHR 037.002
Brand: GHR
Blue Ghr clutch springs 2.3 mm. Ghr code: 037.002 Pair of 2 GHR minimoto clutch springs, suitable for Junior engines.
Reference: 143.000.261
Brand: POLINI
Minimoto Polini 910 Rs hull with 6.2 HP air motor, 6.5 inch wheels, white colour. Polini code: 143.000.261. Minimoto Polini 910 S hull 6.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...
Reference: 143.010.011
Brand: POLINI
Cylinder with piston water transfers 3 d.36. Polini code: 143.010.011
Reference: supp.moll.sil
Brand: XRACING
XRacing silencer spring support. 100% made in Italy stainless steel product.
Reference: FM10046-40
Brand: Formula
Formula front brake hose for minimoto. The original formula brake hose. The Formula brake hose for Dm, Stamas, Grc, and others. Ring attachment: 6 mm Tube diameter: 5 mm Formula Code: FM10046-40
Reference: 007
Brand: DM
DM black aluminum fork legs for minimoto. 28 mm diameter, 2025 model. Compatible with DM triple clamps from 2020 onwards. Code 007.
Reference: 112.153.05
Brand: GRC
Sintered brake pad pair for PLK radial mechanical or hydraulic calipers. 2-hole mount with 22 mm spacing. Code 112.153.05.
Reference: GHR 016.001
Brand: GHR
GHR factory crankcase. For GHR 50cc and 40cc engine. (compatible with bzm). The first to be designed with an engine casing that allows the clutch unit to be cooled in the best possible way, the main cause of the detachment or breakage of the masses. Particular attention has also been given to the cooling of the ignition unit, because the neodymium magnets...
Reference: 112.286.00
Brand: GRC
Minimoto water tank vent fitting. Tank vent measurements: Total length: 22 mm. Thread length: 6 mm. Pipe connection length: 12 mm. Nut length: 4 mm. Thread diameter: 6 mm. Pipe connection diameter: 5.5 mm. Internal diameter: 3.5 mm.
Reference: 143.355.006
Brand: POLINI
Polini reverse water pump transmission belt. Transmission belt for Polini reverso engine water pump. The original Polini belt for the minimoto water pump. Code: 143.355.006
Polini h2o minibike head with long thread
Code: 143.015.011
