Xmotorstore Payments
Polini mini bike head support silentblock. Polini Code: 143.250.001
Polini mini bike head support silentblock. Polini Code: 143.250.001
Reference: 143.015.023
Brand: POLINI
Polini minibike air cylinder head diameter 36mm 40cc. Polini Code: 143.015.023
Reference: 001002R006B0
Brand: DM
Pair of Dm spacers for air head. Spacers for air motor on frame Dm. Dm minimoto spacers measures: Long side: 51 mm Short side: 30.5mm Hole: 8 mm Outside diameter: 16 mm
Reference: 001002A02900
Brand: DM
Minimoto upper engine support pin Dm, 2 pieces.
Reference: 7009
Brand: STAMAS
Pair of aluminum spacers for fixing the air motor head on Stamas minimoto
Reference: GHR 003.001
Brand: GHR
Ghr h2o increased head cover black. New oversized Ghr head machined from solid for 40 and 50 cc liquid-cooled engines.
Reference: 102-DM
Brand: DM
DM Junior minimoto trim variators. 3-adjustment trim variators, for Dm minimoto, compatible with mini and midi, for Junior. Material: aluminum. Color: Red (anodized). Use: Racing.
Reference: 143.075.010
Brand: POLINI
Polini clutch side closed crankcase for reverse engine 143.075.010
Reference: Pistone IAME 50cc
Brand: CS Racing
Iame Cs piston for 50cc minimoto engines. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: FM10141-10
Brand: Formula
Universal front or rear radial brake caliper Formula for minimoto and minicross. Formula Code: FM10141-10 Attention: The color of the caliper may vary depending on the production batch.
Reference: GHR 501.001
Brand: GHR
Complete 40cc air Ghr engine ready to be installed on the minimoto. Ghr minimoto engine complete with muffler, silencer, 15mm carburetor, venturi and filter. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes.
Reference: TCM32
Brand: Tecnominimoto
Carter bell Tcm For Carter Orioli. Tcm clutch bell housing for Or "Orioli" engines, the card is compatible with 40 and 50 cc 2t minibike engines. It includes the minibike bell bearing, already inserted in the cover.
Reference: TCMR1
Brand: Tecnominimoto
Red minibike bell housing 80 81 mm Tcm. Clutch cover for minibikes, universal.
Reference: 112.153.05
Brand: GRC
Sintered brake pad pair for PLK radial mechanical or hydraulic calipers. 2-hole mount with 22 mm spacing. Code 112.153.05.
Reference: KIT.REV.P.4,2
Brand: POLINI
Polini 4.2 hp engine overhaul kit. comprehends : Racing main bearings c4. Complete gasket kit 4.2 HP. Segment 40 or 50cc. Roller cage.
Reference: 2023
Brand: STAMAS
Pair of aluminum spacers for 25 mm fork
Reference: curva.cs.racing
Brand: CS Racing
Exhaust manifold Cs for flange 10 and 12 mm flange muffler, sector version for racing.
Polini mini bike head support silentblock. Polini Code: 143.250.001
