- Reduced price
- New

Xmotorstore Payments
Polini intake manifolds for Minarelli AM6 and 21 carburettor. Polini code: 215.0462
Polini intake manifolds for Minarelli AM6 engines are designed to simplify the assembly of oversized carburettors.
The slightly elongated rubber manifold facilitates the passage of the clutch wire with the possibility of connecting directly to the original filter box.
The model code 215.0462, specific for assembly with Polini CP 21 carburettor or with PHBG 19/21 carburettors.
Polini intake manifolds for Minarelli AM6 and 21 carburettor. Polini code: 215.0462
Polini intake manifolds for Minarelli AM6 engines are designed to simplify the assembly of oversized carburettors.
The slightly elongated rubber manifold facilitates the passage of the clutch wire with the possibility of connecting directly to the original filter box.
The model code 215.0462, specific for assembly with Polini CP 21 carburettor or with PHBG 19/21 carburettors.
Reference: 201.2104
Brand: POLINI
Polini Cp d.21 Evolution carburettor The evolution carburetors are intended for competitions, for the assembly of the Polini evolution carburetor it is necessary to remove the mixer and vacuum tap from the standard vehicles, as it is necessary to mix the oil / petrol manually. Polini 21 evolution carburetor settings: Maximum jet 114 Minimum Jet 40 Needle...
Reference: 02671
Brand: DELLORTO
Dellorto phbg 21 bs carburetor with manual choke knob. Motor mount: 25 Filter connection: M32x1.25 Gas valve: 50 Conical needle: 16 Pulverizer: 262 AU Maximum jet: 96 Minimum jet: 48 Starter jet: 60 Float: 4 gr Dellorto code 02671
Reference: 02632
Brand: DELLORTO
Dellorto Phbg 21 DS carburettor - Screwed aluminum valve cover - Chrome-plated cylindrical gas valve - Oil duct gasket - Independent circuit starting device - Idle system with jet and mixture adjustment screw - Maximum system with mechanical regulation of the mixture by means of a conical pin - Connection for elastic mounting Ø 25 - Air intake connection...
Reference: FB 001
Brand: OMG
Omg petrol filter made in Italy, with 6 mm hose connection.
Reference: 420011
Brand: XRACING
Motorcycle silicone fuel hose for various applications. This petrol hose for carburetor, tank, and other uses, allows maximum curvature without blocking the flow of fuel. These racing fuel hoses are suitable for all vehicles. Fuel pipe size: 1 METER Fuel tube internal diameter: 5.5mm External diameter of fuel pipe: 6mm Available colors: white petrol tube,...
Reference: 140.0133/10
Brand: POLINI
Polini cylinder kit diameter 43 mm for Piaggio Bravo, yes, eco with pin diameter 10 mm. Polini code: 140.0133 / 10 Polini cylinder kit for: Piaggio, Piaggio Bravo, Piaggio Cba, Piaggio Eco, Piaggio Si, Gilera, Gilera Cba. Cast iron cylinder. 10 mm diameter pin.
Reference: 248.101
Brand: POLINI
Polini variator belt for Sym Joyride 200 Aramid Code: 248.101 Application: Sym, Sym Joyride 200
Reference: 174.0022
Brand: POLINI
Original Polini brake pads for Yamaha and Mbk Code: 174.0022 Application: Mbk, Mbk Skyliner 250, Mbk Cityliner 125 E3 Carburetor, Mbk Skycruiser 250, Mbk Evolis 250 4T ie from 2014, Yamaha, Yamaha Majesty 250 mod. 1999/2000, Yamaha X City 250, Yamaha X Max 125 4V E3, Yamaha X Max 250, Yamaha X Max 250i Original Polini brake pads suitable for replacing...
Reference: 174.0047
Brand: POLINI
Brake pads Suzuki Burgman, Skywawe 250, 400x, k3, k6 Code 174.0047 These pads are applicable as a replacement to replace the original pads for: Suzuki Burgman / Skywawe 250 brake pads, Suzuki Burgman / Skywawe 400 X brake pads, Suzuki Burgman / Skywawe 400 K3 brake pads, Suzuki Burgman / Skywawe 400 K6 brake pads
Reference: 203.0046
Brand: POLINI
Polini air box 30 degrees long. Available in the variants: 203.0046 filter for Phbg, measures: 32x118x80 203.0042 filter for Phva, measures: 36x118x80 203.0050 filter for Phbl, measurements: 39x105x80
Reference: 215.0455
Brand: POLINI
Polini evolution P.R.E. engine intake manifold for Piaggio Zip 50 2t. Polini code: 215.0455 Polini evolution P.R.E. engine intake manifold Long Piaggio.
Reference: 280.0055
Brand: POLINI
APRILIA: SCARABEO 50 2T STREET RESTYLING Piaggio - SR 50 2T R, FACTORY (Piaggio) LC - MOJITO 50 2T Piaggio - SR 50 2T R, FACTORY (Piaggio) LC E4DERBI: GP1 50 EURO2, OPEN, RACE dal 2005-> - GP1 50 2001-2003 - ATLANTIS 02, BULLET, CITY, TWO CHIC 50 PiaggioGILERA: DNA 50 - EASY MOVING 50 - ICE 50 - RUNNER 50 PURE JET - RUNNER 50, SP, POGGIALI - STALKER 50...
Reference: 03.ST.0001.B
Brand: Ohvale
Black lower triple clamp for Ohvale GP-2 and GP-0 EVO (110 4S, 160). Genuine Ohvale part – Code 03.ST.0001.B.
Reference: 200.0046
Brand: POLINI
Polini exhaust for Piaggio Si Eco boss country model. Polini Code: 200.0046 The Polini exhaust for Piaggio Si Eco boss improves engine performance and efficiency.
Reference: 143.395.015
Brand: POLINI
Polini minibike front brake wire, for mechanical brakes. Polini code: 143.395.015
Reference: 20 9715B
Brand: Malossi
Genuine Malossi kit 20 9715B for mounting the exhaust. Includes flange and fasteners. Replacement for discontinued muffler 32 9027. Fits Aprilia, Derbi, Gilera, Piaggio, and Italjet scooters.
Reference: 166.0076
Brand: POLINI
Polini cylinder kit diameter 47 mm. Polini Code: 166.0076 Polini cylinder kit for: Adly Atv 50, Aeon, Aeon Cobra 50, Aprilia, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sonic 50, Aprilia SR 50, Aprilia Scarabeo 50, Atala, Atala Carosello 50, Benelli, Benelli 491 50 GT , Benelli ST, Benelli K2 50, Benelli Naked 50, Benelli Pepe 50, Benelli Pepe 50 LX,...
Reference: 143.340.042
Brand: POLINI
Polini silencer support bracket and tail. Polini Code: 143.340.042
Reference: 2914202
Brand: Malossi
Malossi RACING spring set for original clutch Malossi code: 2914202 RACING SPRING for ORIGINAL clutch Pre-hardened carbon steel springs with high yield strength, protected by a high heat resistance paint in various colors. The different colors highlight the load of each set of springs.
Reference: 230.0403
Brand: POLINI
Polini gearbox for Vespa PX-PE-COSA-T5 125/150/200 Code: 230.0403 Polini gearbox cross for: Vespa, Vespa 125 2T PX, Vespa 125 2T T5, Vespa 200 2T PE, Vespa 200 2T PX, Vespa 125 2T Cosa, Vespa 150 2T Cosa, Vespa 200 2T Cosa, Lml, Lml Star deluxe 125 2T, Lml Star deluxe 150 2T
Reference: 03.SC.0006.L
Brand: Ohvale
Ohvale Spacer exhaust 110 Code: 03.SC.0006.L
Polini intake manifolds for Minarelli AM6 and 21 carburettor. Polini code: 215.0462
Polini intake manifolds for Minarelli AM6 engines are designed to simplify the assembly of oversized carburettors.
The slightly elongated rubber manifold facilitates the passage of the clutch wire with the possibility of connecting directly to the original filter box.
The model code 215.0462, specific for assembly with Polini CP 21 carburettor or with PHBG 19/21 carburettors.