Xmotorstore Payments
Polini hi-speed e-bike brose display all road 6 pin 950.830.051
POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly with the original ones while maintaining their water resistance. Installation takes place in a few minutes without opening the engine or removing the original seals and is totally invisible as its housing uses the internal space of the engine cover. It is totally reversible and you can return to the original configuration in a few minutes. Without battery as it is self-powered.
For BOSCH Smart System, by default it has unlocking always active and the correct speed is indicated by the last 2 digits on the display, for example 12.5 corresponds to 25 km/h.
For Brose and Specialized, they are activated via the WALK button and show the correct speed.
For Specialized with Mahle engine, the speedometer will always show half your actual speed, the same thing for km. To know the exact speed and km, just double it.
Extra Notes:
The HI-Speed for the Bosch Smart system makes the bike more responsive thanks to a different sensor reading by slightly shifting the engine power delivery curve.
The HI-Speed for Specialized and for Brose does not require removing the engine from the bike as it connects directly to the display.
Polini hi-speed e-bike brose display all road 6 pin 950.830.051
POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly with the original ones while maintaining their water resistance. Installation takes place in a few minutes without opening the engine or removing the original seals and is totally invisible as its housing uses the internal space of the engine cover. It is totally reversible and you can return to the original configuration in a few minutes. Without battery as it is self-powered.
For BOSCH Smart System, by default it has unlocking always active and the correct speed is indicated by the last 2 digits on the display, for example 12.5 corresponds to 25 km/h.
For Brose and Specialized, they are activated via the WALK button and show the correct speed.
For Specialized with Mahle engine, the speedometer will always show half your actual speed, the same thing for km. To know the exact speed and km, just double it.
Extra Notes:
The HI-Speed for the Bosch Smart system makes the bike more responsive thanks to a different sensor reading by slightly shifting the engine power delivery curve.
The HI-Speed for Specialized and for Brose does not require removing the engine from the bike as it connects directly to the display.
Reference: 950.830.034
Brand: POLINI
Hi-Speed e-bike Brose, code 950.830.034 Hi-Speed e-bike for: Brose e-bike, Brose Mag, Brose for specialized, Continental, Continental 36V Magnet code 950.870.001
Reference: 204.0358
Brand: POLINI
Polini piston for Vespa 125 T5 diameter 61.8 mm. Polini code: 204.0358 Polini piston for: Vespa, Vespa 125, Polini
Reference: 30103502
Brand: HJC
Visor Rpha 1 Hjc HJ-35. HJ35 version visor for HJC RPHA 1 helmets. Hjc rpha 1 helmet visor available in several colors: 30103501 HJ-35 rpha 1 visor transparent. 30103502 HJ-35 rpha 1 smoked visor. 30103503 HJ-35 rpha 1 dark smoke visor. 30103504 HJ-35 visor rpha 1 silver. 30103505 HJ-35 rpha 1 blue visor. 30103506 HJ-35 visor rpha 1 gold. 30103507 HJ-35...
Reference: 7718152B
Brand: Malossi
Malossi clutch bell with fin 7718152B Code: 7718152B -Internal diameter 93 mm -Outer diameter 104 mm -Weight 560 grams Technical features: - Interchangeable with the original bell. -Designed for maximum strength with minimum weight. -Clutch Bell in special deep drawing steel, obtained by cold forming. -Central hub in carbon steel obtained from bar and...
Reference: 5517516
Brand: Malossi
Malossi 5517516 flywheel and fan assembly Code: 5517516 Malossi flywheel and fan assembly for Vespower ignition. Flywheel dimensions diameter 125X42 mm
Reference: 223.0120
Brand: POLINI
Intake sleeve Vespa Px Pe 125cc 200cc 2t diameter 34mm length 33mm. Polini code: 223.0120
Reference: MC1SF
Brand: HJC
Hjc i30 Aton helmet The i30 was born from years of research and design, bringing the best jet helmet to the market. It starts with the new generation visor. This new Pinlock ready visor offers a wide view without distortion and now has a reinforced structure around the lower edges in order to reduce wind turbulence. The visor does not require the use of...
Reference: FD40071-10
Brand: Formula
Formula tube fixing o-ring kit Code: FD40071-10
Reference: 204.0955/A
Brand: POLINI
Vespa 125cc 4t 61 mm piston, selection A 204.0955/A
Reference: 343.0006
Brand: POLINI
Polini CP carburetor idle adjustment screw and spring. Polini carburetor air screw available in version: 343.0005 SCREW AND ADJUSTMENT SPRING CARB.CP 343.0006 SCREW AND MINIMUM SPRING CARB.CP 15 (L.23 mm.) 343.0007 SCREW AND MINIMUM SPRING CARB.CP 17.5 / 19 (L.20.7 mm.) 343.0008 SCREW AND MINIMUM SPRING CARB.CP 21/23/24 (L.19.2 mm.) 343.0032 SCREW AND...
Reference: tcm201836
Brand: Tecnominimoto
TCM rear red hub for DM (114 mm). For hydraulic brakes. Compatible with all original Dm rims, with flare to apply the Or water pump transmission pulley.
Reference: 112.273.00
Brand: GRC
Grc series curved minimoto radiator. Including anti-vibration mounts.
Reference: 174.0082
Brand: POLINI
Honda brake pads Code: 174.0082 Application: Honda, Honda @ 125, NES 125, Honda Forza 125/250/300, Honda Jazz 250, Reflex 250, Honda SH 125i / 150i / 300i / 350, Honda S wing 125/150
Reference: 274.0002
Brand: POLINI
Polini crown z 28 asa 25 for 4-valve head Polini crown for: Polini, Polini XP4T 110
Reference: 3216365
Brand: Malossi
Malossi Gp mhr exhaust 3216365 replica 4 stroke approved for Honda Code: 3216365 Thanks to the strengthening of Malossi's technical staff (equipped with very modern laboratories) and to the many years of experience in the world of competitions, Malossi wanted to make the difference, giving as an imperative for the design of the new GP MHR REPLICA 4-Stroke...
Reference: 001002R014A0
Brand: DM
Pair of DM minimoto front wheel spacers. DM Code: 001002R014A0
Polini hi-speed e-bike brose display all road 6 pin 950.830.051
POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly with the original ones while maintaining their water resistance. Installation takes place in a few minutes without opening the engine or removing the original seals and is totally invisible as its housing uses the internal space of the engine cover. It is totally reversible and you can return to the original configuration in a few minutes. Without battery as it is self-powered.
For BOSCH Smart System, by default it has unlocking always active and the correct speed is indicated by the last 2 digits on the display, for example 12.5 corresponds to 25 km/h.
For Brose and Specialized, they are activated via the WALK button and show the correct speed.
For Specialized with Mahle engine, the speedometer will always show half your actual speed, the same thing for km. To know the exact speed and km, just double it.
Extra Notes:
The HI-Speed for the Bosch Smart system makes the bike more responsive thanks to a different sensor reading by slightly shifting the engine power delivery curve.
The HI-Speed for Specialized and for Brose does not require removing the engine from the bike as it connects directly to the display.
