Xmotorstore Payments
Pmt 140/60R13 Soft slick
Pmt 140/60 13 inch tyre. Rubber for track use only.
type: scooter
design type: slick
compound hardness: 50 Shore A
rubber width: 140mm
rubber shoulder: 60
design use: dry
use of compound: racing
recommended rim width: 2.5-3.5"
pressures: 1.3-1.6bar
Pmt 140/60R13 Soft slick
Pmt 140/60 13 inch tyre. Rubber for track use only.
type: scooter
design type: slick
compound hardness: 50 Shore A
rubber width: 140mm
rubber shoulder: 60
design use: dry
use of compound: racing
recommended rim width: 2.5-3.5"
pressures: 1.3-1.6bar
Reference: GHR 039.001
Brand: GHR
Ghr mass guide for minimoto clutches
Reference: 02 5084B
Brand: Malossi
Malossi intake manifold diameter 19 mm 02 5084B Code: 02 5084B Malossi inclined lamellar intake manifold for Piaggio Ape 50cc
Reference: 230.0015
Brand: POLINI
Vespa 50 FL / Ape 50 FL clutch discs (3 discs), code 230.0015 Clutch discs instruction: We advise you to keep the new cork discs in oil overnight before assembly. Clutch discs series for: Piaggio, Piaggio Ape 50 FL, Vespa, Vespa 125 2t fl, Vespa 50 2t hp
Reference: 1610746
Brand: Malossi
Malossi phbl 25 bs fuel system for Vespa 125cc 1610746 Malossi code: 1610746 Malossi phbl 25 bs elastic fuel system to the crankcase Application: Malossi fuel system for Vespa ET3 Primavera 125 2T Malossi fuel system for Vespa Primavera 125 2T
Reference: Rac-sens-temp-mini
Brand: XRACING
Minimoto water temperature sensor fitting in red ergal. Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling. The fitting fits easily into the minimoto water pipe, allowing the...
Reference: EK428SHDR132
Brand: EK (Enuma Chain)
Motorbike chain step 428 model EK428SHDR132. EK chain EK428SHDR132 SHDR Series Formed by 132 links with 428 pitch suitable for motorcycles with maximum displacement of: 200 cc combined with SPJ joint (Clip joint).
Reference: 202.0000
Brand: POLINI
Primary Vespa 125/150 Px VNZ2T-VLX1T extended ratio Z = 23/64 Code: 202.0000 It does not fit on the 2001/2017 Euro2 / 3 model. Application: Vespa, Vespa 150 2T PX, Fast Sprint, Vespa 125 2T PX, Vespa 125 2T TS, Vespa 125/150 2T Cosa, Lml, Lml Stal deluxe 125 2T / 150 2T
Reference: Used-stamas-rim
Brand: STAMAS
Stamas minibike rim used. Used rim for Stamas minimoto, with 5-hole attachment. Attention: used products are excluded from the guarantee.
Reference: 211.0011
Brand: POLINI
Vespa 50cc 2t head diameter 57,5mm. Polini code: 211.0011
Reference: 11 7268
Brand: Malossi
Complete Malossi gasket kit for 65 diameter cylinder kit for Honda 125cc motorcyclesMalossi code: 11 7268
Reference: 2013 A/28
Brand: STAMAS
Pair fork factory midi d.28 Stamas
Reference: 03.TE.0190.L
Brand: Ohvale
Alfano support for Ohvale Gp-0 and Gp-2. Ohvale code: 03.TE.0190.L Support to mount the Alfano instrumentation on Ohvale. The Ohvale support for Alfano is applied to the radiator attachment, using the supports already present as standard on all Ohvale. The kit includes the Alfano support plate and the following screws: 2x TBEI 6x35 and 2x TBEI 6x30. These...
Reference: 4418916
Brand: Malossi
Malossi MB4L-B gel battery 4418916 Code: 4418916 TECHNICAL FEATURES -Ready to use, does not require maintenance -Factory Activated (VRLA) -Waterproof -Multi-position mounting -Sulphation of the plate reduced to a minimum -Suitable for cold climates -No contact with acids -Longer duration -Complies with the European regulation 2021 -Voltage 12
Reference: 2513879B
Brand: Malossi
Malossi roller guide cap for variator 2513879B Malossi code: 2513879B Malossi roller guide cap for Multivar variator 2513879B.
Reference: 143.805.025
Brand: POLINI
Polini 910 white front fairing fairing. Polini code: 143.805.025
Reference: 01.SW.0912.L
Brand: Ohvale
Ohvale Bolt hexagon socket M6Code: 01.SW.0912.L
Pmt 140/60R13 Soft slick
Pmt 140/60 13 inch tyre. Rubber for track use only.
type: scooter
design type: slick
compound hardness: 50 Shore A
rubber width: 140mm
rubber shoulder: 60
design use: dry
use of compound: racing
recommended rim width: 2.5-3.5"
pressures: 1.3-1.6bar
