Xmotorstore Payments
Muffler Malossi 3217871 Power classic Exhaust
Code: 3217871
Even the Vespa SPECIAL 50, the most classic of scooters, sometimes needs a little more panache. And on a classic two-stroke engine the most obvious and simple of the modifications that can be made is the addition of an expansion muffler.
Therefore, Malossi technicians have designed an exhaust system from scratch specially designed for the dear old Vespa SPECIAL 50, with the aim of making it immediately more performing and enjoyable without however distorting the timeless line of the Piaggio scooter.
It looks like the most classic of MUFFLERS but all the new features and improvements are hidden under the skin. To get the best out of this expansion and to allow it to be fitted to all Vespas, the new manifold has been designed to be able to adapt to all thermal units currently on the market for this Vespa, from the original cylinder to the most performing in the Malossi range.
It is precisely the manifold, with its shape, that best connects the flow of exhaust gases from the cylinder to the muffler body, thus guaranteeing a significant increase in performance. The muffler body, with its characteristic expansion shape, has been specifically designed to guarantee maximum performance combined with roundness in operation. From idle to maximum revs, the exhaust gas suction effect generated by this component is maximized.
This component has been designed with the precise aim of being identical to the original so as to be completely discreet. Inside, however, two chambers have been created separated by a bulkhead in order to maximize the correct expansion of the exhaust gases while minimizing the noise from the muffler.
Malossi Power Classic Exhaust, maximum performance and driving pleasure for your Vespa SPECIAL 50 hidden by the most classic and discreet of clothes.
Malossi exhaust for:
3217871 EXHAUST MALOSSI POWER CLASSIC EXHAUST X VESPA SPECIAL 50
3217871 EXHAUST MALOSSI POWER CLASSIC EXHAUST VESPA SPECIAL 50
Reference: 252.0008
Brand: POLINI
Polini exhaust gasket. Code: 252.0008
Reference: 01.AS.0283.L
Brand: Ohvale
Ohvale Anti-surge washer Code: 01.AS.0283.L
Reference: 109
Brand: DM
Dm minimoto seat post reinforced 7020 aluminum. Weight: 567g
Reference: 204.0759/C
Brand: POLINI
Pistone Polini diametro 47,6 mm selezione C (47,565 mm) Pistone Polini per: Butalco, Butalco Astro 50, Butalco Lobito 50, Derbi, Derbi Gpr 50, Derbi Senda 50, Gilera, Gilera Smt 50, Gilera RCR 50, Gilera GSM 50, Gilera H@K, Gilera ZULU, Polini
Reference: 1117422B
Brand: Malossi
Complete gasket kit for 47 diameter cylinder kit Malossi code: 1117422B
Reference: 174.0146
Brand: POLINI
Yamaha brake pads Code: 174.0146 Application: Yamaha, Yamaha Zuma 125i 4T, Yamaha BW'S 125 4T i, Yamaha Xenter 125/150 4T LC from 2011
Reference: AM8/10 230V
Brand: ZECA
• Electronic circuit in the handle. • Protected soft touch switch. • Swivel hook. • Soft touch handle. • Available in two versions: • 240V or 24V, with or without cable.
Reference: 174.0103
Brand: POLINI
Original Polini brake pads 33,3x90x9,8 mm Code: 174.0103 Application: Kymco, Kymco Downtown 300i 4V / 125i 4V / 200i 4V, Kymco People 300 GTi / 150 E4, Kymco K-XCT 125 i 4V, Kymco Super dink 125 ie, Kymco X-Town 125 i 4T 4V LC / 300 i 4V , Kymco Agility 300i 4T E4, Kawasaki, Kawasaki J 300 ie LC / 125 ie LC
Reference: SEMI FLAT BLACK
Brand: HJC
Hjc C91N helmet The C91N helmet offers riders some of the best features on the market at an affordable price. Starting with the Advance composite polycarbonate shell. The helmet is lightweight and offers superior fit and comfort thanks to advanced CAD technology. The chin guard is operated with a single, easy-to-use lever and is easy to use with gloves....
Reference: 140.0085
Brand: POLINI
Polini thermal group kit for Piaggio Ape. Polini Piaggio Ape cylinder kit diameter 69 mm, pin diameter 18 mm. Polini Code: 140.0085 Compatible with: Piaggio Ape 601 V - Ape CAR P2 - Ape P 501
Reference: 5519746
Brand: Malossi
Malossi Force master 2.1 electronic control unit 5519746 for Honda Malossi code: 5519746
Reference: Pmt 10x3 R6 e-fire
Brand: PMT TYRES
Pmt E-fire 10x3 6 inches. The new generation Pmt rubber for e-scooters, suitable for 6-inch rims. Category: E-Scooters Type: 10 "x 3 (R6.0) Design type: Urban Compound hardness: 52 Shore A Rubber width: 76 mm Internal diameter: 155 mm External diameter: 250 mm Design use: Street Use of compound: Universal Rim width: 35-45mm Pressures: 1.2-2.2 Bar / 18-32 PSI
Reference: 001002A00300
Brand: DM
Minimoto Dm steering bearings plus spacer and midi bushings.
Reference: 317.0110
Brand: POLINI
Series of Polini studs and cylinder nuts 7x123 mm. Polini Code: 317.0110 Set of Polini studs and cylinder nuts for: Aprilia, Aprilia Aera 51, Aprilia Rally 50, Aprilia Sonic 50, Aprilia Sr 50, Benelli, Benelli 491 50, Benelli K2 50, Beta, Beta Ark 50, Beta Eikon 50, Italjet, Italjet Dragster 50, Malaguti, Malaguti F 12 50, Malaguti F 15 50, Mbk, Mbk Nitro...
Reference: 171.0205
Brand: POLINI
Polini ecu wiring for Vespa euro 3/4 171.0205
Reference: 215.0463
Brand: POLINI
Polini intake manifold for Minarelli AM6 and 23 24 carburettor. Polini code: 215.0463 Polini intake manifolds for Minarelli AM6 engines are designed to simplify the assembly of oversized carburettors. The slightly elongated rubber manifold facilitates the passage of the clutch wire with the possibility of connecting directly to the original filter box....
Muffler Malossi 3217871 Power classic Exhaust
Code: 3217871
Even the Vespa SPECIAL 50, the most classic of scooters, sometimes needs a little more panache. And on a classic two-stroke engine the most obvious and simple of the modifications that can be made is the addition of an expansion muffler.
Therefore, Malossi technicians have designed an exhaust system from scratch specially designed for the dear old Vespa SPECIAL 50, with the aim of making it immediately more performing and enjoyable without however distorting the timeless line of the Piaggio scooter.
It looks like the most classic of MUFFLERS but all the new features and improvements are hidden under the skin. To get the best out of this expansion and to allow it to be fitted to all Vespas, the new manifold has been designed to be able to adapt to all thermal units currently on the market for this Vespa, from the original cylinder to the most performing in the Malossi range.
It is precisely the manifold, with its shape, that best connects the flow of exhaust gases from the cylinder to the muffler body, thus guaranteeing a significant increase in performance. The muffler body, with its characteristic expansion shape, has been specifically designed to guarantee maximum performance combined with roundness in operation. From idle to maximum revs, the exhaust gas suction effect generated by this component is maximized.
This component has been designed with the precise aim of being identical to the original so as to be completely discreet. Inside, however, two chambers have been created separated by a bulkhead in order to maximize the correct expansion of the exhaust gases while minimizing the noise from the muffler.
Malossi Power Classic Exhaust, maximum performance and driving pleasure for your Vespa SPECIAL 50 hidden by the most classic and discreet of clothes.
