- Reduced price
- New

Xmotorstore Payments
Professional Capit helmet dryer. Cap Code: WEV-030/031/032/070. Dry Helmet Capit is a professional helmet dryer used by the best MotoGP and Superbike riders designed to really and effectively solve one of the most annoying problems for riders: drying your helmet. When you are driving a motorcycle or a car on the track, you sweat whatever the outside temperature. Thus it happens that in the cold seasons but also when the heat is particularly humid, the sweat from the helmet does not dry, thus creating problems of little comfort, fogging of the visor or even worse drops of sweat on the eyes.
With the "hot air" function (the "cold air" function can also be selected), the DRY HELMET is able to dry the inside of the helmet in just a few minutes and without leaving annoying odours.
It can be ordered with a 220/230V and 100/110V power supply and with a European (EU - 220/230 Volt) - English (UK - 230 Volt) - American/Japanese (USA/JPN - 100/110 Volt) - Australian type plug (AUS - 240 Volts). Transport bag included.
Professional Capit helmet dryer. Cap Code: WEV-030/031/032/070. Dry Helmet Capit is a professional helmet dryer used by the best MotoGP and Superbike riders designed to really and effectively solve one of the most annoying problems for riders: drying your helmet. When you are driving a motorcycle or a car on the track, you sweat whatever the outside temperature. Thus it happens that in the cold seasons but also when the heat is particularly humid, the sweat from the helmet does not dry, thus creating problems of little comfort, fogging of the visor or even worse drops of sweat on the eyes.
With the "hot air" function (the "cold air" function can also be selected), the DRY HELMET is able to dry the inside of the helmet in just a few minutes and without leaving annoying odours.
It can be ordered with a 220/230V and 100/110V power supply and with a European (EU - 220/230 Volt) - English (UK - 230 Volt) - American/Japanese (USA/JPN - 100/110 Volt) - Australian type plug (AUS - 240 Volts). Transport bag included.
Specific References
Reference: 62113200
Brand: CIABEX
Children's summer winter motorcycle balaclava, the textile balaclava can be used in all seasons, practical and easy to wear. The balaclava can be used with motorcycle, bicycle, ski, and other generic helmets. Made in Italy design Warning: this product is not a personal protective equipment. Use and wear under adult supervision.
Reference: 01.IF.0088.L
Brand: Ohvale
Ohvale Kit brake collar Code: 01.IF.0088.L
Reference: 5111572
Brand: Malossi
Malossi Multivar 2000 5111572 variator Code : 5111572
Reference: 11 7394
Brand: Malossi
Complete Malossi gasket kit for cylinder kit diameter 40 - 47 Malossi code: 11 7394
Reference: IMA-40300
Brand: CS Racing
Or external dome cover Cs. 5-piece kit.
Reference: 214.0004
Brand: POLINI
Antivibration support male-female 8 mm, silent block M8. Polini Code: 214.0004
Reference: 6118806B
Brand: Malossi
Malossi K-DRIVE z60 crown Malossi code: 6118806B Malossi crown for YAMAHA T MAX 530 ie 4T LC euro 4 2017 (J415E). Malossi crown for YAMAHA T MAX 560 ie 4T LC euro 5 2020-2021 (J420E). Malossi crown for YAMAHA T MAX 560 ie 4T LC euro 5 2022. Malossi crown for YAMAHA T MAX DX 530 ie 4T LC euro 4 2017 (J415E). Malossi crown for YAMAHA T MAX SX 530 ie 4T LC...
Reference: 017010
Brand: BZM
Bzm minimoto piston for 50cc 2t. Original Bzm piston diameter 40mm with flat head for 50cc 2t engines. Available in sizes: Piston bzm selection 0. Piston bzm selection A. Bzm piston AA selection. Piston bzm selection B. Attention: The clearance between piston and cylinder must be approximately 0.040 (four hundredths).
Reference: 142.0100
Brand: POLINI
Peugeot cylinder kit diameter 46 mm. Polini Code: 142.0100 Peugeot cylinder kit for: Peugeot, Peugeot 103, Peugeot 104, Peugeot 105, Peugeot GL 10, Peugeot 103 SPX 50 Aluminum cylinder
Reference: 11 7572B
Brand: Malossi
Complete Malossi gasket kit for 47 diameter cylinder kit for Cagiva City 50 cc Malossi code: 11 7572B
Reference: 01.SB.0606.L
Brand: Ohvale
Ohvale Drive disk assembly primary clutch Code: 01.SB.0606.L
Reference: A2193
Brand: Alfano
2-input hub for Alfano 6 A2193. HUB with 2 inputs: 20cm plus magnetic / infrared speed. This hub allows the simultaneous connection of an A2201 speed sensor and an A1401 / A1411 infrared sensor or a magnetic sensor. Note: this HUB is specially designed to connect to the green connector of the PROIIIevo, ALFANO6.
Reference: 173.0521
Brand: POLINI
Polini rear shock absorber for Vespa GTS. Polini code: 173.0521 . The Polini shock absorbers are hydraulic with adjustable spring preload. The more rigid calibration compared to the originals offers greater stability and better control both when cornering and braking, ensuring superior comfort even when using the scooter with a second passenger on board....
Reference: WPA520
Brand: CAPIT
Split dual wiring for charging Capit Warmme heated gloves. NOTE: only for version with two gloves batteries
Reference: 250.034
Brand: POLINI
Polini clutch bell for Suzuki Burgman Evolution model diameter 160 mm Code 250.034 This Polini clutch bell is compatible as an original spare. Diameter: 160 mm Weight: 1434 gr Application: Suzuki, Suzuki Burgman / Skywawe 400 K7, K8, K9 / 400 L0, L1, L2, L3, L4, L5, L6, L8
Reference: 11 2069
Brand: Malossi
Malossi intake gasket bag for Peugeot RCX - SP [104 - 405] - SPX 103 50 cc Malossi code: 11 2069
Reference: 6118221B
Brand: Malossi
Malossi torque driver Malossi code: 6118221B Malossi torque drivers for PIAGGIO BOSS 50 2T. Malossi torque drivers for PIAGGIO BOXER 50 2T. Malossi torque drivers for PIAGGIO BRAVO 50 2T. Malossi torque drivers for PIAGGIO CIAO 50 2T. Malossi torque drivers for PIAGGIO CIAO PX 50 2T. Malossi torque drivers for PIAGGIO GRILLO 50 2T. Malossi torque drivers...
Professional Capit helmet dryer. Cap Code: WEV-030/031/032/070. Dry Helmet Capit is a professional helmet dryer used by the best MotoGP and Superbike riders designed to really and effectively solve one of the most annoying problems for riders: drying your helmet. When you are driving a motorcycle or a car on the track, you sweat whatever the outside temperature. Thus it happens that in the cold seasons but also when the heat is particularly humid, the sweat from the helmet does not dry, thus creating problems of little comfort, fogging of the visor or even worse drops of sweat on the eyes.
With the "hot air" function (the "cold air" function can also be selected), the DRY HELMET is able to dry the inside of the helmet in just a few minutes and without leaving annoying odours.
It can be ordered with a 220/230V and 100/110V power supply and with a European (EU - 220/230 Volt) - English (UK - 230 Volt) - American/Japanese (USA/JPN - 100/110 Volt) - Australian type plug (AUS - 240 Volts). Transport bag included.