Xmotorstore Payments
Pmt 110/55R10 S slick dragster rubber. Pmt dragster 10-inch tyre, designed and developed to offer maximum grip in drag races.
Category: 10" Mini-GP, Scooter & Minimotard.
Type: 10" Dragsters.
Design Type: Slick.
Compound hardness: 50 Shore A.
Rubber width: 110mm.
Diameter: 395mm.
Design use: Dry.
Compound use: Racing Dragster.
Rim Width: 2.5-3.0".
Pressures: 1.5-1.9bar.
Pmt 110/55R10 S slick dragster rubber. Pmt dragster 10-inch tyre, designed and developed to offer maximum grip in drag races.
Category: 10" Mini-GP, Scooter & Minimotard.
Type: 10" Dragsters.
Design Type: Slick.
Compound hardness: 50 Shore A.
Rubber width: 110mm.
Diameter: 395mm.
Design use: Dry.
Compound use: Racing Dragster.
Rim Width: 2.5-3.0".
Pressures: 1.5-1.9bar.
Reference: 267000030
Brand: RMS
Tire assembly and disassembly lever. The lever allows you toremove or insert the rubber on the rim.
Reference: MI222B01
Brand: CAPIT
Pair of Capit 10” tire warmers for Ohvale, Minigp and scooter. Sizes 100/90 front and 120/80 rear. Fast heating and pro-level performance.
Reference: 1610857
Brand: Malossi
Malossi phbl 24 ad fuel system for Vespa 1610857 Malossi code: 1610857 Malossi phbl 24 fuel system rigid to the crankcase Application: Malossi fuel system for Vespa ETS 125 2T Malossi fuel system for Vespa PK XL 125 2T Malossi fuel system for Vespa PK HP FL 50 2T Malossi fuel system for Vespa PK XL 50 2T
Reference: 202.1406
Brand: POLINI
Primary gear Yamaha Giggle Z 16-51 To be combined with kit 166.0116 Code: 202.1406 Application: Yamaha, Yamaha Aerox 50 4T R LC ie E4 from 2018, Yamaha Neo'S 50 4T LC ie E4 from 2018
Reference: A1210-5i
Brand: Alfano
Internal tire pressure and temperature sensor for ALFANO 7 5 inches (KARTING). Alfano A1210-5i code. Alfano A1210-5i features: 5-inch rim sensors, specially designed for karting, these new wireless sensors transfer the pressure and temperature measured INSIDE your tires to your ALFANO 7 every second. Pressure accuracy: 0.02 bar. Temperature accuracy: 1...
Reference: 190.0081
Brand: POLINI
Polini muffler for Vespa euro 5 125 cc gts 4t 190.0081. Polini Motori presents the new muffler designed for the Vespa EURO 5 125 GTS and GTS SUPER ie 4T 4V. The muffler is approved according to the Euro 5 standard, it is also available in a version complete with catalyst. Very easy to assemble, it is extremely light, weighing about 3 kg less than the...
Reference: 12012
Brand: LeoVince
Carbon cover for Yamaha Yzf 600 R6 pick up (06/12)
Reference: 6719255b
Brand: Malossi
Malossi secondary gear toothed wheel z 55 with 48 mm diameter keying for Vespa 6719255b Malossi code: 6719255b Wheels made with special cementation steel, the wheels are obtained with CNC gear cutting machines and the wheels are ground in the contact surfaces. In the contact surfaces between the gears we have obtained small pockets useful for transporting...
Reference: 3118213
Brand: Malossi
Malossi cylinder Big Deps 4 Mhr diameter 47 mm in aluminum with pin diameter 12 mm 3118213 Code: 3118213 The Ø 47 BIG DEPS 4 MHR thermal group combines the best aspects of the BIG DEPS thermal groups with absolutely innovative and unique features. Intended for all Ciao, Si, Bravo, Boss, Grillo mopeds, it is at the top of the range of the already extensive...
Reference: 34 8544.a0
Brand: Malossi
Piston 2T diameter 40 mm Malossi 34 8544 Malossi code: 34 8544. Piston 2T diameter 40 mm Malossi 34 8544 with pin diameter 12 mm and 1 rectangular segment. Selection: A/B Each selection step is equivalent to an increase of 0.01 mm.
Reference: 6114701B
Brand: Malossi
Malossi VENTILVAR 2000 half-pulley Malossi code: 6114701B Malossi half-pulley for KAWASAKI J 300 ie 4T LC euro 3 WS60. Malossi half-pulley for KAWASAKI J 300 ie 4T LC euro 4 2018 WS60B. Malossi half-pulley for KYMCO AGILITY S 350 ie 4T LC euro 5 2024 KS64B. Malossi half-pulley for KYMCO DINK Street 300 ie 4T LC euro 3 SK60. Malossi half-pulley for KYMCO...
Reference: 6007
Brand: STAMAS
Front fender sr r factory Stamas. Material: Resin Weight: 126g
Reference: ciclistica-gp-0-110-race
Brand: Ohvale
Ohvale GP-0 110 4S Evo Race 2025 chassis. New Ohvale 2025, from today on xmotorstore it is possible to buy the Ohvale Gp-0 chassis without engine. The Ohvale chassis is supplied in the race version with the exception of the engine and the slipper clutch which are not included. Ohvale chassis equipment: - Engine mounts. - Fairings (standard colors). -...
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Reference: A01041C4440B7-0
Brand: Domino
Domino A010 Road Racing grips couple. Pair of grips in two-component thermoplastic rubber with multi-pyramid finish Material: Two-component thermoplastic rubber Length: 120mm / 125mm End: Open Handlebar / Gas tube diameter: 22/26 mm Grooves for iron wire: 2-3 slots Flange diameter: 46 mm Handle diameter Knob mounted: 30 mm
Reference: 51 7575
Brand: Malossi
Malossi Multivar 51 7575 variator for Piaggio Code: 51 7575 Malossi Multivar variator for Piaggio Sfera 2T 75cc. Multivar is very simple to apply and easy to operate. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical...
Reference: 2021/28 X 2
Brand: STAMAS
Stamas clip-on handlebar clamps cnc separable for 28 mm diameter forks with screws, 2 pieces.
Reference: IMC-40100
Brand: CS Racing
Coupling axis 14/5 x 32.3 connecting rod Cs
Pmt 110/55R10 S slick dragster rubber. Pmt dragster 10-inch tyre, designed and developed to offer maximum grip in drag races.
Category: 10" Mini-GP, Scooter & Minimotard.
Type: 10" Dragsters.
Design Type: Slick.
Compound hardness: 50 Shore A.
Rubber width: 110mm.
Diameter: 395mm.
Design use: Dry.
Compound use: Racing Dragster.
Rim Width: 2.5-3.0".
Pressures: 1.5-1.9bar.
