Xmotorstore Payments
The new spring is the ideal replacement for the original Vespa 50/125 small frame spring.
The Wave Polini Original spring is a newly designed spiral produced with high precision construction techniques.
Thanks to the new honeycomb structure, it tolerates high loads despite its reduced dimensions and guarantees excellent flatness on the thrust faces of the clutch.
The block length of the new springs, compared to the original ones, is extremely reduced, allowing a wider adjustment range and thus eliminating the problems of traditional circular section springs.
The Wave Polini Original spring is calibrated to have a load of 80 kg, and is perfect as a replacement for the original Vespa Small Frame 50/125 spring.
The application of the spring is possible on original clutch plates and on Polini clutch plates. The Wave Polini Original spring has been designed for the original 3-disc clutches and for the 4-disc Polini clutches.
The assembly of the spring is recommended both on original engines and on all Polini cast iron thermal units.
Code: 228.0010
The new spring is the ideal replacement for the original Vespa 50/125 small frame spring.
The Wave Polini Original spring is a newly designed spiral produced with high precision construction techniques.
Thanks to the new honeycomb structure, it tolerates high loads despite its reduced dimensions and guarantees excellent flatness on the thrust faces of the clutch.
The block length of the new springs, compared to the original ones, is extremely reduced, allowing a wider adjustment range and thus eliminating the problems of traditional circular section springs.
The Wave Polini Original spring is calibrated to have a load of 80 kg, and is perfect as a replacement for the original Vespa Small Frame 50/125 spring.
The application of the spring is possible on original clutch plates and on Polini clutch plates. The Wave Polini Original spring has been designed for the original 3-disc clutches and for the 4-disc Polini clutches.
The assembly of the spring is recommended both on original engines and on all Polini cast iron thermal units.
Code: 228.0010
Reference: M099341-V90
Brand: PMT TYRES
90 ° tubeless valve for minimoto, scooter, and other rims.
Reference: 140.0065
Brand: POLINI
Polini cylinder kit for Piaggio Ciao diameter 43 mm pin diameter 12 mm. Polini Code: 140.0065
Reference: 29 7454
Brand: Malossi
Malossi RACING spring set for original clutch Malossi code: 29 7454 RACING SPRING for ORIGINAL clutch Springs in pre-hardened carbon steel with high yield strength, protected by a high heat resistance paint in various colours. The different colouring highlights the load of each series of springs.
Reference: 251.0037
Brand: POLINI
Head gasket Vespa 200 2t. Polini Code: 251.0037
Reference: 01.SD.0402.L
Brand: Ohvale
Ohvale Bolt hexagon flange M6x65 Code: 01.SD.0402.L
Reference: 5519266B
Brand: Malossi
Malossi Injtronic 5519266B electronic control unit Code: 5519266B Malossi Injtronic electronic control unit for Malossi I - tech 4 stroke cylinder The Injtronic engine control unit is the natural evolution of the original Piaggio system and allows the vehicle's performance to be increased. The use of a latest generation 32-bit microprocessor, in synergy...
Reference: 5518242B
Brand: Malossi
Malossi Digitronic 5518242B digital electronic control unit Malossi electronic digital Digitronic control unit for 2T 50 CC euro 4 vehicles.
Reference: 174.0026
Brand: POLINI
Original Polini brake pads 46.9x78.9x7.5 mm Code 174.0026 Application: Aprilia, Aprilia Atlantic 500/500 Sprint, Aprilia Arrefice, Aprilia ETX 125, Aprilia Leonardo 300, Aprilia Red Rose 125, Aprilia RX 125 R, Aprilia Scarabeo 125/150/200/400, Aprilia Scarabeo 500 from 2002 to 2005 / from 2006 to 2008, Aprilia Sportcity 125/200, Aprilia Tuareg 125 / Wind...
Reference: grf-blata-elite
Brand: XRACING
Blata elite minimoto adhesive graphics. Blata minimoto adhesive graphics for the brand Blata, Elite model. Blata minimoto adhesive graphics. The graphics are adhesive, no need to use glue, just apply them on the fairing. Customizable race number on request.
Reference: 2043
Brand: DELLORTO
Dell'orto SHA 15/15 carburettor with filter, the sha 15 15 carburettor is dedicated to low displacement mopeds. Sha 15/15 calibrations: Motor connection: from 21 to 17 mm Air filter attachment: 59 For engines: 2-stroke two-stroke Air start: lever Float: 3.5 gr Dellorto Code: 02043
Reference: 133.6005
Brand: POLINI
Polini cylinder kit diameter 48 mm. Polini Code: 133.6005. Polini cylinder kit for Minarelli, Minarelli P4, Minarelli P6 Corsa 42, Fantic Motor, Fantic Motor Regularity 50 cc. Stud center distance 48x48 Mantle diameter 54 mm Aluminum cylinder
Reference: 203.0148
Brand: POLINI
Polini air filter for Yamaha T-MAX 500 from 2008. YAMAHA: T MAX 500 Injection 2008 - T MAX 530 ie from 2012 to 2016. Model 4B5 - Model 4B5. Polini Code: 203.0148
Reference: 112.486.00
Brand: GRC
2-mass clutch unit extractor. Minimoto clutch extractor for all Italian engines.
Reference: 01438
Brand: DELLORTO
Dellorto PHVA 17.5 US 01438 carburettor. Dellorto code: 01438. 17.5 dellorto carburetor phva 17.5 us version for scooters. Motor connection: flange. Filter connection: 35 mm. Air starting device: Automatic starter predisposition. For engines: 2 stroke. Mixer: yes. Gas valve: 15362.40. Conical pin: 16250.27. Pulverizer: 15192.209 Gn. Maximum jet: 613.90....
Reference: 2319241B
Brand: Malossi
Malossi 2319241B Multiple Gear Pin Malossi Code: 2319241B. Primary shaft pin: made of casehardened steel then ground in the bearing housings. Dimensions: - length 121 mm - bearing diameter 15 mm - bushing diameter 13 mm - wheel side diameter 15 mm
The new spring is the ideal replacement for the original Vespa 50/125 small frame spring.
The Wave Polini Original spring is a newly designed spiral produced with high precision construction techniques.
Thanks to the new honeycomb structure, it tolerates high loads despite its reduced dimensions and guarantees excellent flatness on the thrust faces of the clutch.
The block length of the new springs, compared to the original ones, is extremely reduced, allowing a wider adjustment range and thus eliminating the problems of traditional circular section springs.
The Wave Polini Original spring is calibrated to have a load of 80 kg, and is perfect as a replacement for the original Vespa Small Frame 50/125 spring.
The application of the spring is possible on original clutch plates and on Polini clutch plates. The Wave Polini Original spring has been designed for the original 3-disc clutches and for the 4-disc Polini clutches.
The assembly of the spring is recommended both on original engines and on all Polini cast iron thermal units.
Code: 228.0010
