Xmotorstore Payments
Polini front wheel pin for Piaggio and Vespa
Ean code: 8054705118197
The Polini wheel pin axle designed for Piaggio and Vespa scooters has been designed to be perfectly complemented with the Polini suspension arm code 050.2660, but can also be applied to original levers.
It is made of induction hardened carbon steel with high surface hardness and is specific for wheel bearing Ø 20mm.
A shim is included in the kit to facilitate assembly of the wheel pin with the Polini swinging arm.
To increase safety for use on the track, a plastic bumper knob screwed into the head has been provided which can be interchangeable in case of a fall.
100% Made in Italy
Polini Code: 202.1423
Polini front wheel pin for Piaggio and Vespa
Ean code: 8054705118197
The Polini wheel pin axle designed for Piaggio and Vespa scooters has been designed to be perfectly complemented with the Polini suspension arm code 050.2660, but can also be applied to original levers.
It is made of induction hardened carbon steel with high surface hardness and is specific for wheel bearing Ø 20mm.
A shim is included in the kit to facilitate assembly of the wheel pin with the Polini swinging arm.
To increase safety for use on the track, a plastic bumper knob screwed into the head has been provided which can be interchangeable in case of a fall.
100% Made in Italy
Polini Code: 202.1423
Reference: 204.0950
Brand: POLINI
Minarelli Am6 piston 40.3 mm cast iron cylinder. Polini code: 204.0950
Reference: 143.625.001
Brand: POLINI
Polini 910 RS minimoto swingarm. Polini code: 143.625.001 complete left and right swingarm kit for Polini 910 RS and S.
Reference: 178.2002
Brand: POLINI
Polini braking system for Vespa GTS and Runner. Polini code: 178.2002 Compatible with Vespa: 125 4T GTS ie LC E3 - 125 4T GTS ie LC E4 4V 16->20 - 125 4T GTS ie LC E5 4V from '21-> - 125 GTS 3V - 150 4T GTS ie 3V SUPER - 150 4T GTS ie E4 4V from 2016 to 2020 - 150 GTS 3V - 150 GTS EURO 5 25 - 300 4T GTS HPE E5 from 21-24 (MD31M) - 300 4T GTS, GTV E3...
Reference: 01.IF.0013.L
Brand: Ohvale
Ohvale brake lever return spring, compatible with Gp-0 and Gp-2. Ohvale Code: 01.IF.0013.L
Reference: 204.0004/C
Brand: POLINI
Sachs piston 50cc 48mm selection C (47,945 mm) 204.0004/C
Reference: 0618108B
Brand: Malossi
Malossi Intake Gasket for VR-One Crankcase Malossi Code: 0618108B
Reference: 2511889b
Brand: Malossi
Spring guide for Malossi Torsion Controller clutches 2511889b Malossi code: 2511889b Spring guide for Malossi Torsion Controller clutches .
Reference: M40-CS
Brand: CS Racing
Cs air complete 40cc Factory engine, the kit includes: -Factory engine block, complete with cnc racing shaft, clutch cover and cnc ignition, complete hammer clutch, air black head -Dedicated racing exhaust depending on the flange selected -Official Team silencer -15 CS carburettor with dedicated filter PRODUCT ASSEMBLED TO ORDER: DELIVERY FROM 15 DAYS
Reference: 0.100.070.00
Brand: STAMAS
Minimoto Stamas complete Midi version, SR Race Factory team model with liquid-cooled 50CC Cs Iame engine. Engine: Cs Racing 50cc race ready liquid cooled Radiator: oversized Water pump: oversized diameter 35 Steering damper: Adjustable Matris Brakes: Formula radial hydraulic Fairing: complete in resin (no paint) Tires: Pmt T41Slick
Reference: MC21
Brand: HJC
Hjc i31 Reno helmet. "APC" Advanced Polycarbonate Compound: By blending high-quality polycarbonate with high-impact ABS in an optimal ratio, HJC has developed a strong, impact-resistant shell while maintaining a lightweight design. "ACS" Advanced Channel Ventilation System: Full front-to-back airflow to eliminate heat and humidity Pinlock Ready HJ-43...
Reference: 6711860
Brand: Malossi
Malossi HTQ secondary gears z 16 / 42 6711860 Malossi code: 6711860. Straight tooth transmission gears in special steel with recalculated ratio. They completely eliminate any axial thrust, reducing stress on the bearings. Made with very high precision machines, casehardened, tempered and ground in order to provide high characteristics of silence and...
Reference: 01.SD.0803.L
Brand: Ohvale
Ohvale Contact gear indicationCode: 01.SD.0803.L
Reference: 0021615.090
Brand: Acerbis
Acerbis X-Road right brake lever protection. Acerbis code: 0021615.090 Brake lever guard to protect the lever from accidental contact. Adjustable in length to fit all lever types. Pre-curved design to ensure maximum freedom of movement. Use of high-strength Nylon which ensures stiffness and flexibility in the event of contact. Increased front shield for...
Reference: 61 1192
Brand: Malossi
Malossi z15 pinion for Suzuki TS X 50 cc Malossi code: 61 1192 Malossi pinion for Suzuki TS X 50 2T
Reference: 3415191B
Brand: Malossi
Malossi piston kit for shock absorber 3415191B Malossi code: 3415191B. Piston diameter 36 mm with guide shoe of the type LUBRIFLON PTFEB70 (modified compound loaded bronze).
Reference: 11 7236b
Brand: Malossi
Complete Malossi gasket kit for 47 diameter cylinder for original head Malossi code: 11 7236b
Polini front wheel pin for Piaggio and Vespa
Ean code: 8054705118197
The Polini wheel pin axle designed for Piaggio and Vespa scooters has been designed to be perfectly complemented with the Polini suspension arm code 050.2660, but can also be applied to original levers.
It is made of induction hardened carbon steel with high surface hardness and is specific for wheel bearing Ø 20mm.
A shim is included in the kit to facilitate assembly of the wheel pin with the Polini swinging arm.
To increase safety for use on the track, a plastic bumper knob screwed into the head has been provided which can be interchangeable in case of a fall.
100% Made in Italy
Polini Code: 202.1423
