Xmotorstore Payments
Single-reed intake manifold diameter 18-16 / 19 mm for Ape 50, code 215.0270
Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL
It is mounted on the crankcase with 3-hole attachment.
Carburetor connection diameter 23 mm
Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL
Single-reed intake manifold diameter 18-16 / 19 mm for Ape 50, code 215.0270
Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL
It is mounted on the crankcase with 3-hole attachment.
Carburetor connection diameter 23 mm
Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL
Reference: 04.AT.0001.L
Brand: Ohvale
Öhlins steering damper for Ohvale Gp-7. Ohvale code: 04.AT.0001.L Adjustable Öhlins steering damper with dedicated calibration for Ohvale Gp-7.
Reference: 04 6199
Brand: Malossi
Malossi RED FILTER E8 air filter with 32 mm for PHBG A B carburetors. Malossi code: 04 6199 Red Filter E8: E8 air filters with self-extinguishing expanded polyurethane filter element, applicable to dell'Orto PHBG carburetors.
Reference: 218.0021
Brand: POLINI
Muffler pipe Vespa 50 125 218.0021
Reference: 950.830.049
Brand: POLINI
Polini hi-speed e-bike bosch smart system 950.830.049 POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly...
Reference: 254.0138
Brand: POLINI
Polini cylinder base gasket thickness 0.10 mm Piaggio Zip 50cc 2t h2o. Polini Code: 254.0138
Reference: 01.SE.0007.B
Brand: Ohvale
Black tank fixing ring for Ohvale GP-0 and GP-2. Fits all models. Original spare part – Code 01.SE.0007.B.
Reference: GHR 069.001
Brand: GHR
Kit gaskets reed valve crankcase crankcase/pack
Reference: 6115666
Brand: Malossi
Malossi X K belt strap for maxi scooter 22x13x824 mm angle 28 Malossi code: 6115666 Malossi belt for APRILIA ATLANTIC - Arrecife 200 4T LC (PIAGGIO M234M). Malossi belt for GILERA DNA 180 4T LC. Malossi belt for GILERA RUNNER ST 200 4T LC euro 3. Malossi belt for GILERA RUNNER VXR 180 4T LC. Malossi belt for GILERA RUNNER VXR 200 4T LC <-2005. Malossi...
Reference: 7717313B
Brand: Malossi
Malossi Power Up clutch bell for Vespa Ø 109.5 mm. Code 7717313B. Reinforced and race-ready. Compatible with PX and COSA 2 models.
Reference: 111019
Brand: Motul
Motul oil 300V² factory line SBK 0W-30 4t. Motul: 111019. Oil for racing and supersport motorcycles. ESTER Core® Technology racing motorcycle lubricant. Technologically advanced lubricant for racing teams, but also for high performance road bikes, formulated to offer maximum power and better clutch grip, together with exceptional engine and gearbox...
Reference: 3216646
Brand: Malossi
Malossi Gp mhr exhaust 3216646 replica 4 stroke for Yamaha approved Code: 3216646 The new range of mhr REPLICA mufflers has been designed with CAD and defined for each type of scooter and motorcycle 50. After very strict tests in the Malossi Engineering test rooms, equipped with the most modern and sophisticated equipment, the engineers of the Malossi...
Reference: 209.0322
Brand: POLINI
Polini gasket set for Rotax 123 engine 209.0322 Code: 209.0322 Polini gaskets set for: Aprilia, Aprilia Sport 125, Aprilia AF1 125, Aprilia Europa 125, Aprilia Pegaso 125, Aprilia Red rose 125, Aprilia RS 125, Aprilia RX 125 R, Aprilia Tuareg Rally 125, Aprilia Tuareg wind 125, Aprilia SX 125 , Polini, Rotax, Rotax 122, Rotax 123, Hm, Hm Derapage 125, Hm...
Reference: 96780681A
Brand: Ducati
Ducati Plastic Side Case Covers – Part No. 96780681A – Silver. Original Ducati plastic side case covers, silver. This accessory is designed for Multistrada models and adds a touch of elegance and aesthetic continuity to the bike.
Reference: 01.SD.0109.L
Brand: Ohvale
Ohvale Gasket base cylinder 190/212 Code: 01.SD.0109.L
Reference: 4567 37 F
Brand: PBR
Pitbike chainring 4 holes 37 teeth. Made in Italy chainring for pitbike with 4 holes, 37 teeth. Pitbike crown measurements: Central hole: 48 mm Distance between holes: 68 mm Fixing screw holes diameter: 8.5 mm Crown code: 4567 37 F
Reference: 242.284
Brand: POLINI
Polini rollers 25X17 pieces 8. Available: 242.280 ROLLS 25X17 GR.14.0 242.281 ROLLS 25X17 GR.15,0 242.282 ROLLS 25X17 GR.16,0 242.283 ROLLS 25X17 GR.13,0 242.284 ROLLS 25X17 GR.11,0 242.285 ROLLS 25X17 GR.12,0
Single-reed intake manifold diameter 18-16 / 19 mm for Ape 50, code 215.0270
Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL
It is mounted on the crankcase with 3-hole attachment.
Carburetor connection diameter 23 mm
Intake manifold for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL
