Xmotorstore Payments
Pgo Big Max 50cc crankshaft
Reference: 204.0931/B
Brand: POLINI
Polini piston diameter 47.6 mm, for cross cylinder selection B (47.555 mm) 204.0931/B
Reference: 51 8852
Brand: Malossi
Malossi Multivar 51 8852 variator Code: 51 8852 Malossi Multivar variator for Pgo big max 50cc. Multivar is very simple to apply and easy to operate. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical "tranquility" in gear, even...
Reference: FM995/04RACE
Brand: BMC
Washable Bmc air filter for Husqvarna Svartpilen 401 2018, racing version. Bmc code: FM995/04RACE. Base Width/External Diameter (mm) 128. Length/Inner Base Diameter (mm) 149. Filter material: Oiled cotton gauze. Washable: Yes. Warranty: 2-year limited. EAN: 8055732596477.
Reference: A2152
Brand: Alfano
Water temperature sensor M10 40 cm A2152. This K-technology thermocouple sensor with 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264. Note: This sensor must be used with an A3401 extension cable or...
Reference: 190.0068
Brand: POLINI
Polini muffler for Kymco Ak 550 euro 4 FROM 2017. Polini code: 190.0068. Approved for: Kymco AK550 ABS Type E1 European homologation norm 97/24 / EC chap. 9 (referred to noise and power control)
Reference: 206.0360
Brand: POLINI
Polini segment diameter 57x1.5 mm s10 206.0360 Polini segment for: Vespa, Vespa 125
Reference: 5513705
Brand: Malossi
Malossi Force Master 1 code 5513705 electronic control unit Malossi Force Master 1 electronic control unit for I - tech 4 stroke cylinders The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders. Carburation adjustment ± 20% at min/average/max Rev limiter: +1,200 RPM Original 9,800 - Malossi...
Reference: 204.0760/D
Brand: POLINI
Piston Aprilia Leonardo 125cc 67mm selection D. Polini Code: 204.0760/D Compatible with: APRILIA: LEONARDO 125 - LEONARDO 150 - SCARABEO 125 - SCARABEO 150 POLINI: PISTON SPARE PARTS ROTAX: ROTAX 4T
Reference: 204.0018
Brand: POLINI
Vespa Et3 125cc piston 57.8 mm. Polini code: 204.0018
Reference: 01.IF.0087.L
Brand: Ohvale
Ohvale Gp-0 front brake lever. Ohvale code: 01.IF.0087.L Brake lever for second generation Gp-0.
Reference: 6008
Brand: STAMAS
Stamas sr r factory rear fender. Material: Resin Weight: 132g
Reference: 4419165
Brand: Malossi
Malossi MB10L-A2 / B2 gel battery 4419165 Code: 4419165 TECHNICAL FEATURES -Ready to use, does not require maintenance -Factory Activated (VRLA) -Waterproof -Multi-position mounting -Sulphation of the plate reduced to a minimum -Suitable for cold climates -No contact with acids -Longer duration -Complies with the European regulation 2021 -Voltage 12
Reference: 1610930
Brand: Malossi
phbg 19 bd power system. Malossi code 1610930 Discover the PHBG 19 BD fuel system, a fundamental component for maximizing the performance of your engine. Carefully designed by industry experts, this system offers uniform fuel distribution and precise airflow regulation, optimizing engine efficiency and ensuring a smoother ride. Ideal for motorcycles and...
Reference: 5118058
Brand: Malossi
Malossi Multivar 2000 Mhr Next variator 5118058 Code: 5118058 Malossi Multivar 2000 Mhr Next variator Technical features -Further expanded shifting range, especially the short gear. -Improved shifting linearity throughout the phase -Black hard anodizing treatment -Roller sliding ramp modified to allow greater linearity of operation in order to maintain...
Reference: 001002R02600
Brand: DM
Pair of rear wheel bearings with 130 DM spacer. This kit is compatible with the rear hub of the Dm minimoto, with mechanical brake and old type iron/steel swingarm. Spacer size 117.5 mm.
Reference: TCM60024
Brand: Tecnominimoto
Screw and bushing kit for Dm and Grc minimoto discs. Anti-unscrewing minimoto disc screw kit, it can also be used on hubs with stripped thread, thanks to the practical nut to be positioned on the inside of the disc. The disc screw kit is compatible with: Dm, Grc, Phantom.
Pgo Big Max 50cc crankshaft
