Xmotorstore Payments
Polini clutch for race Vespa px 125 150 200e with z24 straight teeth pinion.
Polini code: 230.0530
Compatible with:
VESPA: 125 2T PX - 125 2T T5 - 125 2T TS - 125/150 2T COSA - 150 2T PX - 150 2T SPRINT VELOCE - 200 2T COSA - 200 2T PE, PX.
The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Attention: CHECK THE TEETH INSTALLED IN THE ENGINE.
Attention: CHECK THAT THE ORIGINAL THICKNESS OF THE MIXER IS 3.7 mm.
Polini clutch for race Vespa px 125 150 200e with z24 straight teeth pinion.
Polini code: 230.0530
Compatible with:
VESPA: 125 2T PX - 125 2T T5 - 125 2T TS - 125/150 2T COSA - 150 2T PX - 150 2T SPRINT VELOCE - 200 2T COSA - 200 2T PE, PX.
The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Attention: CHECK THE TEETH INSTALLED IN THE ENGINE.
Attention: CHECK THAT THE ORIGINAL THICKNESS OF THE MIXER IS 3.7 mm.
The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Thanks to its innovative reversed operation layout, the part connected to the crankshaft is no longer the external bell, but the internal hub.
The main features are:
Pressure plate on axial bearing.
Aluminium bell.
Coat machined from solid with oil collection channel.
The aluminium discs with increased surface area of 8 teeth maximise the efficiency of the transmission and guarantee greater transmitted power. The Polini HT clutch gives the possibility to adjust the clutch spring load and choose the optimal teeth of the primary gear to adapt the ratios.
With the wide choice of spare parts in the catalogue it is possible to modify the Polini HT For Race clutch by easily replacing the primary gear.
The gear engagement is precise and fluid for an effortless gear change.
Reference: 211.0247
Brand: POLINI
Polini h2o head for Yamaha Minarelli Aprilia. Polini Code: 211.0247
Reference: 230.0533
Brand: POLINI
Polini clutch for race Vespa px 125 150 200e with z23 helical teeth pinion. Polini code: 230.0533 Compatible with: VESPA: 125 2T PX - 125 2T T5 - 125 2T TS - 125/150 2T COSA - 150 2T PX - 150 2T SPRINT VELOCE - 200 2T COSA - 200 2T PE, PX. The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Reference: 210.0034
Brand: POLINI
Polini crankshaft for Vespa 125 et3 evolution Polini crankshaft for Vespa 125 et3 evolution, full shoulders diameter 20 mm, stroke 52.8 mm Polini crankshaft for: Vespa, Vespa 125 2T Stroke 52.8 mm 20 mm cone Conrod machined from solid, center distance of 102 mm. Weight 1,750 kg Warning: use bearings with "C4" tolerance, code 280.0031 (25x47x12 - 20x47x14)
Reference: 1117960B
Brand: Malossi
Complete Malossi gasket kit for 63 diameter cylinder for original head Malossi code: 1117960B
Reference: MC8SF
Brand: HJC
Hjc i91 Carst helmet In the new Hjc i91 helmet we can find: -double approval (P/J) -Advanced composite polycarbonate shell with adjustment Adjustable polycarbonate chin guard: Lightweight, with superior fit and comfort thanks to advanced CAD technology. -Pinlock Ready HJ-33 VISOR: Offers 99% UV protection, anti-scratch coating. -Multi-Step dynamic sun...
Reference: 03.FA.0107.L
Brand: Ohvale
Ohvale Fork Spring MUPO K7.5 Code: 03.FA.0107.L
Reference: 950.830.041
Brand: POLINI
Hi-Speed E-Bike Bosch performance line my2020 It is very easy to install as the connectors interface directly with the original ones. The installation takes place in a few minutes. It does not require settings as it regulates itself. Without battery as it is self-powered. This article must be used in compliance with national traffic regulations, therefore...
Reference: 203.0014
Brand: POLINI
Polini air filter for Vespa 50/125 CP carburetor. Polini code: 203.0014 PIAGGIO: AIR FILTERS VESPA: VESPA 125 2T PRIMAVERA - VESPA 50 2T SPECIAL - VESPA 125 2T PRIMAVERA ET3 - VESPA 125 2T ETS - VESPA 50 2T PK - VESPA 50 2T XL POLINI: POLINI CARBURETOR CP 19 - CARBURETOR POLINI CP 21 - CARBURETOR POLINI CP 24
Reference: Sel.Blu.2022
Brand: CS Racing
Minimoto Selettra coil, blue color, with CIV 2024 marking. This coil is compatible with Cs, Iame, Ghr, Bzm, Zocchi, Tcm, Beast. The coil is marked CIV 2024, to be used in the Italian minimum championship, and FMI races. Selettra 3500 minimoto coil assembly features: The distance between the holes of the blue coil is 52 mm, the holes are 6 mm. ATTENTION:...
Reference: 6111347B
Brand: Malossi
Malossi VENTILVAR 2000 half-pulley Malossi code: 6111347B Malossi half-pulley for HONDA FORESIGHT 250 4T LC. Malossi half-pulley for HONDA FORZA 250 4T LC 2001. Malossi half-pulley for HONDA JAZZ 250 4T LC 2001. Malossi half-pulley for HONDA PANTHEON 125 2T LC. Malossi half-pulley for HONDA PANTHEON 150 2T LC. Malossi half-pulley for HONDA REFLEX 250 4T...
Reference: 215.0163
Brand: POLINI
Polini intake manifold for Vespa PK-ETS-XL-HP 50cc 125cc 3 holes carburetor cp. Polini Code: 215.0163 Can be combined with the Polini CP Ø 24 carburettor cod. 201.2402
Reference: A14-ELETTRICA
Brand: Lem motor
Lem A14 electric minicross. Electric Power Lem, the exclusive Italian design motorcycle by Lem Motor, suitable for 6-10 year olds, with 14-inch front wheel and 12-inch rear wheel, reinforced frame, double hydraulic brake. Perfect for safe fun. Data sheet: 1000w Brushless motor. Power supply. Electric ignition. 3-speed selector. Max weight capacity 75kg....
Reference: 08530
Brand: DELLORTO
Dellorto K tapered needle for PHF, PHM, PHSB, PHBE, VHSB, VHSC, VHSH carburetors. Available in variants from K1 to K99. Ideal for racing and tuning setups.
Reference: 01.AS.0300.L
Brand: Ohvale
Original Dell’Orto PHBH 28 carburetor for Ohvale GP-0 and GP-2 160 cc 4-stroke models. High flow for racing use. Code 01.AS.0300.L.
Reference: 01.SW.0130.L
Brand: Ohvale
Ohvale Washer 6.2×1.5×13Code: 01.SW.0130.L
Reference: 3412946
Brand: Malossi
Piston 2T diameter 40 mm Malossi 3412946 Malossi code: 3412946. Piston 2T diameter 40 mm Malossi 3412946 with pin diameter 12 mm and 1 rectangular segment. Selection: 0/B/C/D Each selection step is equivalent to an increase of 0.01 mm.
Polini clutch for race Vespa px 125 150 200e with z24 straight teeth pinion.
Polini code: 230.0530
Compatible with:
VESPA: 125 2T PX - 125 2T T5 - 125 2T TS - 125/150 2T COSA - 150 2T PX - 150 2T SPRINT VELOCE - 200 2T COSA - 200 2T PE, PX.
The Polini HT For Race clutch represents the pinnacle of technology for the Vespa PX or PE.
Attention: CHECK THE TEETH INSTALLED IN THE ENGINE.
Attention: CHECK THAT THE ORIGINAL THICKNESS OF THE MIXER IS 3.7 mm.
