Xmotorstore Payments
Malossi Maxi wing finned clutch bell 7719706B
Malossi code: 7719706B.
Malossi Maxi Wing finned clutch bell.
Internal diameter 125 mm.
External diameter 140 mm.
Weight 960 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.
Malossi clutch bell for:
Malossi clutch bell for Honda Navi 110 4T 2022-> (JK07E).
Malossi clutch bell for Sym Jet X 125 ie 4T LC euro 5 2023-> (XS1P52MI-5).
Malossi clutch bell for Peugeot Tweet 125 ie 4T euro 5 2023->.
Malossi clutch bell for Lambretta V Special 125 ie 4T euro 5 2023->.
Malossi clutch bell for Sym Symphony ST 125 ie 4T LC euro 5 2021-> (XS1P52MI-5).
Malossi clutch bell for Sym Jet 14 125 ie 4T LC euro 5 2021-> (XS1P52MI-5).
Malossi clutch bell for Sym Symphony 200 ie 4T euro 5 2021->.
Reference: 2520191
Brand: Malossi
Malossi rear end cap 2520191 Malossi code: 2520191 Malossi rear end cap in aluminum for silencer with 70 mm diameter 2520191.
Reference: 53012 78
Brand: DELLORTO
Lever starter kit for Dellorto PHBG PHBD carburettor. Dellorto code: 53012 78. Lever choke for Dellorto PHBG carburettor. Lever choke for Dellorto PHBD carburettor. Lever air starter kit for Dellorto phbg and phbd carburettor, compatible with all sizes, suitable for solving space problems linked to the classic vertical knob.
Reference: 5519562
Brand: Malossi
Malossi Power ignition only for Peugeot mopeds 5519562 Malossi code: 5519562
Reference: 243.076
Brand: POLINI
Honda Sh 125/150 contrast spring Code 243.076 Polini contrast spring for scooters.
Reference: 504016
Universal motorcycle steering damper, 75mm stroke, adjustable in intensity in various steps. Suitable for sports and road use.
Reference: 01.SZ.0302.L
Brand: Ohvale
Ohvale O-RING 18×3 Code: 01.SZ.0302.L
Reference: 1610352
Brand: Malossi
Malossi sha 15 C fuel system for Puch maxi 50cc Code: 1610352 Application: Malossi fuel system for Puch Maxi 50
Reference: 174.0023
Brand: POLINI
Original Polini brake pads 41x114,9x9,5 mm Code: 174.0023 Application: Honda, Honda Foresight 250 98/250 99, Honda Pantheon 125/150 inject, Honda Silver wing 400/600, Honda SW T, Peugeot, Peugeot Sv 250 Polini brake pads for Honda and Peugeot, ideal for replacing original OEM pads.
Reference: 2517044b
Brand: Malossi
Variator spring guide Torsion controller Malossi 2517044b Malossi code: 2517044b Variator spring guide Torsion controller Malossi.
Reference: 01.AS.0290.L
Brand: Ohvale
Ohvale Idle Mixture screw kit PHBL24 Code: 01.AS.0290.L
Reference: 2511214B
Brand: Malossi
Malossi roller guide cap for variator 2511214B Malossi code: 2511214B Malossi roller guide cap for Multivar 2000 variator.
Reference: 241.675
Brand: POLINI
Polini Variator for Hi speed Malaguti F 12 model 2000 Code: 241.675 Variator supplied with a series of rollers 16x13 gr. 6.9 Application: Variator for Malaguti, Variator for Malaguti F 12 50 Digit kat E2 / 50 Phantom 2000
Reference: 174.0015
Brand: POLINI
Polini for race brake pads 45x35,9x6mm Code: 174.0015 Application: Aprilia, Aprilia RS 50, Aprilia RX 50, Beta, Beta Eikon 50/125/150, Beta MX6 50, Beta RR 50, Beta Tempo 50, Cagiva, Cagiva Progress 50, Derbi, Derbi Atlantis 50, Derbi GP1 50 EURO2 , OPEN, RACE dal 2005, Derbi GP1 50 2001-2003, Derbi GPR 50, Derbi Hunter 50, Derbi Paddock 50 ST, Derbi...
Reference: 204.0985/B
Brand: POLINI
Polini piston diameter 47,6 mm, selection B (47.545 mm) Polini piston for: Piaggio, Piaggio Zip 50 Polini piston for Pre2 cylinder
Reference: 3520.03-01-Ohvale
Brand: Domino
Ohvale throttle control with knobs. Throttle control complete with knobs for Ohvale Gp-0 Gp-2. Aluminum throttle with black knobs. With right knob overprinted on the tube. Support material: Aluminum Support finish: Painted Black colour Max travel: 57 mm Rapidity: 1.9 ° / mm Cable Type: Single cable
Reference: FM40028-20
Brand: Formula
Formula minimoto minicross brake lever. Universal right or left. Lever weight 40g, Formula code: FM40028-20
Malossi Maxi wing finned clutch bell 7719706B
Malossi code: 7719706B.
Malossi Maxi Wing finned clutch bell.
Internal diameter 125 mm.
External diameter 140 mm.
Weight 960 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.
