Xmotorstore Payments
Curve with 45 ° register Polini code: 343.0021
Reference: 215.0272
Brand: POLINI
Polini single-reed intake manifold for Ape 50cc. Polini code: 215.0272 PIAGGIO: APE 50 - APE 50 FL, FL2, FL3, RST MIX (6 Springs) Rubber sleeve diameter 36m length 31mm
Reference: 213.0602
Brand: POLINI
Carbon sheets 110X100mm thickness 0.40mm. Carbon plates to cut out for slats. Polini Code: 213.0602
Reference: 213.0500
Brand: POLINI
Petal reed Vespa 45x29mm 0,30mm. Polini Code: 213.0500
Reference: 253.0130
Brand: POLINI
Intake manifold gasket Vespa ETS XL 3 holes. Polini Code: 253.0130
Reference: 02632X
Brand: DELLORTO
Dellorto phbg 21 ds 2t manual air carburetor with depressor and mixer. Dellorto code: 02632X 21 carburettor with attachment for scooter depressor and oil mixer. Type: PHBG 21 DS. Filter connection: M32 x 1.25mm. Mixer: yes. Starting device (choke): manual choke (cable). Minimum jet: 50. Gas valve: 40. Maximum jet: 92 of 5mm. Float: 4 grams. Suitable for...
Reference: 342.0115
Brand: POLINI
PWK carburetor atomizer. For pit bikes with Keihin carburettor we recommend the 40 hole nozzle. Available sizes: 342.0115 PWK carburetor 8-hole nozzle. 342.0112 pulverizer with 20 holes for PWK carburetor. 342.0127 pulverizer with 30 holes for PWK carburetor. 342.0113 40-hole PWK carburetor nozzle.
Reference: 02 5084B
Brand: Malossi
Malossi intake manifold diameter 19 mm 02 5084B Code: 02 5084B Malossi inclined lamellar intake manifold for Piaggio Ape 50cc
Reference: 5515735
Brand: Malossi
Lambda emulator TC UNIT O2 Malossi controller 5515735 Code: 5515735 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is constant,...
Reference: 201.2402
Brand: POLINI
Polini Cp 24 carburetor for Vespa 125 Primavera ET3 with filter. Polini Code: 201.2402 The Polini 24 carburettor is mounted on manifolds with a 28.5 mm diameter rubber sleeve. Polini 24 CP carburettor data sheet: Maximum jet 104 Minimum Jet 36 Needle 14/22 25x30 valve Pulverizer bush d.2,7
Reference: 203.0016
Brand: POLINI
Vespa 50cc 2t 16mm air filter box. Polini code: 203.0016Compatible with: VESPA 50 2T SPECIAL - VESPA 50 2T PK - VESPA 50 2T XL
Reference: 215.0452
Brand: POLINI
Polini 360 ° intake manifold sleeve diameter 35mm. Polini Code: 215.0452
Reference: 0977900_52
Brand: DELLORTO
Original Dell’Orto main jet cup for PHBG 2695 carburetors. OEM part code 0977900_52
Reference: 343.0012
Brand: POLINI
Polini float chamber cap with or 343.0012
Reference: 343.0037
Brand: POLINI
Connection flange from carburetor to manifold Cp 19 Ape 50 cc. Polini Code: 343.0037
Reference: 2013800
Brand: Malossi
Malossi X360 inclined manifold kit diameter 21 mm 2013800 Code: 2013800 Malossi X360 inclined manifold kit diameter from 21 mm to 24.5 mm and length 27 mm in Fkm for Derbi Minarelli engines. These new Malossi manifolds are supplied disassembled: the sleeve can be rotated in the flange according to the specific needs of your vehicle, allowing you to...
Reference: 1313798b
Brand: Malossi
Malossi sleeve diameter 21 MHR in FKM Malossi code: 1313798b
Curve with 45 ° register Polini code: 343.0021
