- On sale!
- Reduced price
- New

Xmotorstore Payments
Polini air filter to cut out 30x40cm. Replacing the original air filter with the Polini allows cleaner air to enter, improving engine performance. Polini Code: 203.0145.
Polini Original Air Filter for the most popular 50 cc scooters. and maxi scooter.
Technical features:
High efficiency sponge air filters made of cross-linked flexible polyurethane foam based on polyester. They consist of two layers of sponge; a finer one in blue with a porosity of 60 PPI and a more open one in black with a porosity of 30 PPI. The fine layer filters only the smaller particles while maintaining its characteristics longer as they do not come into contact with the larger particles that have not passed the pre-filtration carried out by the primary layer. The external surface is distinguished by being wavy, offering greater entry of air flows but at the same time retaining 50% more of the coarse dust. Filter efficiency according to European Standards EN779 of grade G3-G4; with weight efficiency higher than 90% and in particular over 50% with particles of 1 micron. Greater capacity to retain dust by impregnating the filter with specific oil for sponge filters. Possibility of regenerating and cleaning the filter with washing and drying. MORE PERFOMANCE The "Polini Original Air Filters" are interchangeable with the original ones, improving the air flows during the intake phase. Thanks to their characteristic of perfectly filtering and purifying the air, they optimize the air-gasoline mixture by increasing the values so as to make the engine highly performing.
Polini air filter to cut out 30x40cm. Replacing the original air filter with the Polini allows cleaner air to enter, improving engine performance. Polini Code: 203.0145.
Polini Original Air Filter for the most popular 50 cc scooters. and maxi scooter.
Technical features:
High efficiency sponge air filters made of cross-linked flexible polyurethane foam based on polyester. They consist of two layers of sponge; a finer one in blue with a porosity of 60 PPI and a more open one in black with a porosity of 30 PPI. The fine layer filters only the smaller particles while maintaining its characteristics longer as they do not come into contact with the larger particles that have not passed the pre-filtration carried out by the primary layer. The external surface is distinguished by being wavy, offering greater entry of air flows but at the same time retaining 50% more of the coarse dust. Filter efficiency according to European Standards EN779 of grade G3-G4; with weight efficiency higher than 90% and in particular over 50% with particles of 1 micron. Greater capacity to retain dust by impregnating the filter with specific oil for sponge filters. Possibility of regenerating and cleaning the filter with washing and drying. MORE PERFOMANCE The "Polini Original Air Filters" are interchangeable with the original ones, improving the air flows during the intake phase. Thanks to their characteristic of perfectly filtering and purifying the air, they optimize the air-gasoline mixture by increasing the values so as to make the engine highly performing.
Reference: 203.0157
Brand: POLINI
Polini air filter to cut out 21X29.7 cm. The cut-out panel air filter is ideal for scooters and maxi scooters. Compatible with all scooters, improves air entry into the engine. Polini Code: 203.0157
Reference: 02 6238B
Brand: Malossi
Malossi inclined intake manifold 20.8x24 mm 02 6238B Code: 02 6238B Malossi inclined intake manifold
Reference: 5519600B
Brand: Malossi
Malossi 5519600B Tc Unit O2 controller lambda emulator Malossi code: 5519600B The use of the new O2 controller allows the management of carburetion in the area where the Lambda probe controls the content of the air-petrol mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a value different from the...
Reference: 1610991
Brand: Malossi
Malossi phbg 19 as 1610991 fuel system Malossi code: 1611200 Application: Malossi fuel system for HONDA AERO NB 50 2T 1987 Malossi fuel system for HONDA VISION MET IN 50 2T Malossi fuel system for KYMCO DJ X 50 2T
Reference: 0965500 28
Brand: DELLORTO
Dellorto nozzle for AU sprayer on PHBG 0965500 28. Nozzle to be inserted into the PHBG Dellorto carburetor, to be able to mount the AU sprayer. Original Dellorto spare part for Phbg. Attention: In some PHBG carburetors, to mount the following nozzle it will be mandatory to mount the AU sprayer.
Reference: 213.0056
Brand: POLINI
Reed valve pack for Polini 100cc engine 213.0056
Reference: 2013800
Brand: Malossi
Malossi X360 inclined manifold kit diameter 21 mm 2013800 Code: 2013800 Malossi X360 inclined manifold kit diameter from 21 mm to 24.5 mm and length 27 mm in Fkm for Derbi Minarelli engines. These new Malossi manifolds are supplied disassembled: the sleeve can be rotated in the flange according to the specific needs of your vehicle, allowing you to...
Reference: 223.0131
Brand: POLINI
Air filter sleeve Vespa 50cc 4t. Polini Code: 223.0131 Compatible with: VESPA 50 4T SPRINT 3V iGET E4 from 18 to 20 - VESPA 50 4T SPRINT 3V iGET E4 from 18 to 20 PIAGGIO: LIBERTY 50 4T iGET 3V ie E4 (CA11M) from 18 to 20
Reference: 5515734
Brand: Malossi
Lambda Emulator TC UNIT O2 Malossi controller 5515734 for Honda Sh Code: 5515734 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is...
Reference: 203.0122
Brand: POLINI
Aprilia Sr 50 Polini air filter 203.0122
Reference: 343.0332
Brand: POLINI
Idle jet carburetor Cp Polini. Available in all sizes: Idle jet 32 Polini carburetor Idle jet 34 Polini carburettor Idle jet 36 Polini carburettor Idle jet 38 Polini carburettor Idle jet 40 Polini carburettor Idle jet 42 Polini carburetor Idle jet 44 Polini carburettor Idle jet 46 Polini carburettor Idle jet 49 Polini carburettor Idle jet 52 Polini...
Reference: 213.0525
Brand: POLINI
Polini 39x32 0,30mm carbon reeds set. Polini Code: 213.0525
Reference: 5519817B
Brand: Malossi
Lambda O2 Emulator Malossi controller 5519817B Malossi code: 5519817B
Reference: 213.0054
Brand: POLINI
Reed valve Polini Vespa 125cc 2t et3 213.0054
Reference: 02594
Brand: DELLORTO
Dellorto PHBG 19 BD carburettor. Dellorto code: 02594. dell'orto 19 carburettor, phbg 19 bd version, with manual air starter, for motorcycles and scooters, and others. Motor connection: 25 mm male. Filter connection: M32 x 1.25mm. Air starting device: manual air by cable. For engines: 2 stroke. Mixer: no. GAS VALVE: 40. Conical needle: W6. Pulverizer: 262...
Reference: 215.0203
Brand: POLINI
Intake manifold for Vespa Pk Xl 50cc 125cc 19mm 2 holes, for mounting 19 and 21mm carburetors. Polini Code: 215.0203 Polini manifold for Vespa combinable with Polini CP carburetors Ø 19 code 2011905 or Ø 21 code 201.2103
Reference: 13 1012b
Brand: Malossi
Malossi sleeve for PHBE - PHF 30 - 34 carburetors (Height 35 cm) Malossi code: 13 1012b
Polini air filter to cut out 30x40cm. Replacing the original air filter with the Polini allows cleaner air to enter, improving engine performance. Polini Code: 203.0145.
Polini Original Air Filter for the most popular 50 cc scooters. and maxi scooter.
Technical features:
High efficiency sponge air filters made of cross-linked flexible polyurethane foam based on polyester. They consist of two layers of sponge; a finer one in blue with a porosity of 60 PPI and a more open one in black with a porosity of 30 PPI. The fine layer filters only the smaller particles while maintaining its characteristics longer as they do not come into contact with the larger particles that have not passed the pre-filtration carried out by the primary layer. The external surface is distinguished by being wavy, offering greater entry of air flows but at the same time retaining 50% more of the coarse dust. Filter efficiency according to European Standards EN779 of grade G3-G4; with weight efficiency higher than 90% and in particular over 50% with particles of 1 micron. Greater capacity to retain dust by impregnating the filter with specific oil for sponge filters. Possibility of regenerating and cleaning the filter with washing and drying. MORE PERFOMANCE The "Polini Original Air Filters" are interchangeable with the original ones, improving the air flows during the intake phase. Thanks to their characteristic of perfectly filtering and purifying the air, they optimize the air-gasoline mixture by increasing the values so as to make the engine highly performing.