- New product
- -20%
- On sale!

Xmotorstore Payments
Polini Cp d.21 Evolution carburettor
The evolution carburetors are intended for competitions, for the assembly of the Polini evolution carburetor it is necessary to remove the mixer and vacuum tap from the standard vehicles, as it is necessary to mix the oil / petrol manually.
Polini 21 evolution carburetor settings:
Maximum jet 114
Minimum Jet 40
Needle 12/22
25x40 valve
Pulverizer bush d.2,7
Air filter attachment d.60
Carburetor sleeve d.28.5
Polini Code: 201.2104
Polini Cp d.21 Evolution carburettor
The evolution carburetors are intended for competitions, for the assembly of the Polini evolution carburetor it is necessary to remove the mixer and vacuum tap from the standard vehicles, as it is necessary to mix the oil / petrol manually.
Polini 21 evolution carburetor settings:
Maximum jet 114
Minimum Jet 40
Needle 12/22
25x40 valve
Pulverizer bush d.2,7
Air filter attachment d.60
Carburetor sleeve d.28.5
Polini Code: 201.2104
Reference: getto massimo Polini cp
Brand: POLINI
Polini main jet for Cp Keihin Pwk carburetor (available from 40 to 119)
Reference: 343.0332
Brand: POLINI
Idle jet carburetor Cp Polini. Available in all sizes: Idle jet 32 Polini carburetor Idle jet 34 Polini carburettor Idle jet 36 Polini carburettor Idle jet 38 Polini carburettor Idle jet 40 Polini carburettor Idle jet 42 Polini carburetor Idle jet 44 Polini carburettor Idle jet 46 Polini carburettor Idle jet 49 Polini carburettor Idle jet 52 Polini...
Reference: 5303600 78
Brand: DELLORTO
Dellorto carburettor 90° tube kit. Dellorto Code: 5303600 78
Reference: 213.0601
Brand: POLINI
Carbon sheets 110X100mm thickness 0.35mm. Carbon plates to cut out for slats. Polini Code: 213.0601
Reference: 215.0330
Brand: POLINI
15mm Peugeot 103 intake manifold. Polini Code: 215.0330 Compatible with Peugeot: 103 - 104 - 105 - GL 10
Reference: 173.0001
Brand: POLINI
Yamaha T-max 500 injection pressure regulator. YAMAHA: T MAX 500 Injection - T MAX 500 Injection 2008 POLINI PRESSURE REGULATOR KIT FOR YAMAHA TMAX: HYPER PRESSURE Polini has put on the market a pressure regulator for Yamaha TMax capable of increasing the pressure of the original fuel injection system from 2.5 atmospheres (original) to 3.5 atmospheres It...
Reference: 370.0000
Brand: POLINI
Set of 10 maximum jets Cp - Keihin - Pwk. The Polini jets kit consists of 10 jets. Polini Code: 370.0000
Reference: 02 1783
Brand: Malossi
Malossi rear intake manifold for Ducati Replica 900cc. Measurements: 40 mm. Malossi Code: 02 1783
Reference: 928.465.004
Brand: POLINI
Polini Thor engine airbox intake duct. Conduit available in variants: 16-17-18-19-22mm
Reference: 215.0191
Brand: POLINI
Polini intake manifold for Gilera 5000/6000 series. Polini Code: 215.0191
Reference: 02 2178B
Brand: Malossi
Malossi intake manifold for Puch Maxi 15x19mm for SHA 15 carburettor. Malossi code: 02 2178B
Reference: 215.0245
Brand: POLINI
Intake manifold motobecane 12-15 SHA. Polini Code: 215.0245
Reference: 215.0433
Brand: POLINI
Polini 360 degrees horizontal intake manifold for Yamaha compatible with Dellorto 26 28 30. Polini code: 215.0433 This manifold is used with the carburetor mounted towards the rear wheel, subject to modification of the frame.
Reference: 1023800 34
Brand: DELLORTO
Aluminum cap for Dellorto PHBE PHF PHM carburetor float chamber. Cap sizes: Internal thread diameter 11mm Outside diameter inlet 20mm External diameter of cap 25mm Nut for 21mm wrench Dellorto Code: 1023800 34
Reference: 203.0123
Brand: POLINI
Polini air filter for Aprilia SR 50 2T Piaggio engine. Polini code: 203.0123
Reference: 24 2094
Brand: Malossi
Malossi jets holder, Malossi code: 24 2094. The Malossi jets holder contains 24 jets, the transparent box allows you to view the jets also from the outside. The case can be stacked, so as to be able to hold several boxes at a time. Jets box sizes: 90x60mm Casting box weight: 0.070g
Reference: 02 4708B
Brand: Malossi
Malossi inclined 20x30 mm intake manifold 02 4708B Code: 02 4708B Malossi inclined intake manifold
Reference: 209.0400
Brand: POLINI
Series of gaskets manifold big valve Mbk booster for mbk booster and Polini
Polini Cp d.21 Evolution carburettor
The evolution carburetors are intended for competitions, for the assembly of the Polini evolution carburetor it is necessary to remove the mixer and vacuum tap from the standard vehicles, as it is necessary to mix the oil / petrol manually.
Polini 21 evolution carburetor settings:
Maximum jet 114
Minimum Jet 40
Needle 12/22
25x40 valve
Pulverizer bush d.2,7
Air filter attachment d.60
Carburetor sleeve d.28.5
Polini Code: 201.2104