Xmotorstore Payments
Malossi Injtronic electronic control unit for original cylinder 5518913B
Code: 5518913B
The Injtronic engine control unit is the natural evolution of the original Piaggio system and allows the vehicle's performance to be increased. The use of a latest generation 32-bit microprocessor, in synergy with hardware designed according to the latest Automotive quality standards, forges the RACING DNA of this device. Designed to be plug & play, i.e. compatible with the original sensors and actuators, the control unit only needs a simple calibration of the throttle opening demand, to make the electronic engine control system synchronous. The calibrations and the refined listed plans allow to obtain a concrete performance increase of the engine.
Technical data
- Carburation adjustment
-Rev limiter: 10,000 RPM
Malossi ECU for:
5518913B ECU MALOSSI PIAGGIO LIBERTY ZIP VESPA SPRINT/PRIMAVERA 50 4T EU5 ->2021
Reference: 215.0447
Brand: POLINI
Polini 360 ° intake manifold sleeve diameter 35mm. Polini Code: 215.0447
Reference: 166.0076/R
Brand: POLINI
Polini cylinder kit diameter 47 mm racing model. Codice Polini: 166.0076/R Polini cylinder kit for: Aprilia, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sonic 50, Aprilia SR 50, Aprilia Scarabeo 50, Atala, Atala Carosello 50, Benelli, Benelli 491 50 GT, Benelli ST, Benelli K2 50, Benelli Naked 50, Benelli Pepe 50, Benelli Pepe 50 LX, Beta, Beta Ark 50,...
Reference: 01.SE.0201.L
Brand: Ohvale
Ohvale plastic petrol tank for Gp-0 and Gp-2. Ohvale Code: 01.SE.0201.L Ohvale GP-0 and GP-2 plastic fuel tank for all models in all displacements. The Ohvale tank kit includes the fuel tap.
Reference: 01.SW.0903.L
Brand: Ohvale
Ohvale Gearshift drum completeCode: 01.SW.0903.L
Reference: 143.803.015
Brand: POLINI
Polini 910 S RS minimoto tail. The tail for 910 is compatible with all models of Polini 910 S and RS. The blue tail for 910 is molded in blue plastic material. Polini Code: 143.803.015
Reference: 143.620.001
Brand: POLINI
Polini 910 RS mini bike central frame, complete with steering head and head bearings. Polini Code: 143.620.001
Reference: 7717370
Brand: Malossi
Malossi reinforced clutch bell with integrated springs. Code 7717370. Superior torque transfer, cooling, and racing-grade stability for scooters.
Reference: 01.SB.0404.L
Brand: Ohvale
Ohvale Bolt M6x40 Code: 01.SB.0404.L
Reference: 175.0023
Brand: POLINI
Rear brake disc Polini engine diameter 178 mm Code: 175.0023 Application: Piaggio, Piaggio ZIP 50 2T SP H2O Attention: every two races it is recommended to check and eventually replace the pawls and the relative screws that fix the brake disc. Spare parts for pawls and screws: d.10 cod. 290,0131; d.14 cod. 290.0132.
Reference: 241.737
Brand: POLINI
Polini Variator for Hi-speed Piaggio Liberty 50 4T iGET 241.737 Code: 241.737 Variator supplied with two series of rollers 19x15.5 of 4.3 gr. and 7gr. Rollers: gr. 4.3 Liberty 50 iget Rollers: gr. 7.0 Vespa 50 iget Piaggio euro 3: - Pair the control unit 171.0007 to the variator. Piaggio / Vespa euro 4: - Pair the control unit 171.0009 to the variator....
Reference: 144.555.008
Brand: POLINI
Idm conical flywheel rotor, for Polini minimotard and minicross. Polini Code: 144.555.008
Reference: 29 9605
Brand: Malossi
Malossi RACING clutch spring set Malossi code: 29 9605 RACING SPRING for ORIGINAL clutch for MALOSSI FLY and DELTA clutches Pre-hardened carbon steel springs with high yield strength, protected by a high heat resistance paint in various colors. The different colors highlight the load of each series of springs.
Reference: 6217433BB
Brand: Malossi
Malossi brake pads Malossi code: 6217433BB Malossi brake pads for APRILIA SR GT 125 ie 4T LC euro 5 2022 Rear. Malossi brake pads for APRILIA SR GT 200 ie 4T LC euro 5 2023 Rear. Malossi brake pads for APRILIA SR GT Sport 125 ie 4T LC euro 5 2022 Rear. Malossi brake pads for APRILIA SR GT Sport 200 ie 4T LC euro 5 2022 Rear. Malossi brake pads for PIAGGIO...
Reference: 243.091
Brand: POLINI
Polini contrast spring for Piaggio Evo slider diameter 4 mm Code: 243.091 Application: Aprila, Aprila Scarabeo 50 2T / 50 4T 2V Restyling / 50 4T 4V Piaggio from 2009, Aprila Sr 50 2T R / 50 2T R LC E4 / 50 4T Motard 4V from 2013, Aprila Sportcity one 50 4T 2V / 50 4T 4V , Aprilia Mojito 50 2T, Derbi, Derbi GP1 50 EURO2, Oper, Race dal 2005/50 2001-2003,...
Reference: usd-dm-fork-plates
Brand: DM
Used Dm triple clamps 28 mm. Used plates for minibike fork Dm diameter 28 mm, in knotted blue colour. Original Dm plates.
Reference: 214.0001
Brand: POLINI
Male-male anti-vibration support M8 30x20 M.8x23 shore 60. Polini code: 214.0001
Malossi Injtronic electronic control unit for original cylinder 5518913B
Code: 5518913B
The Injtronic engine control unit is the natural evolution of the original Piaggio system and allows the vehicle's performance to be increased. The use of a latest generation 32-bit microprocessor, in synergy with hardware designed according to the latest Automotive quality standards, forges the RACING DNA of this device. Designed to be plug & play, i.e. compatible with the original sensors and actuators, the control unit only needs a simple calibration of the throttle opening demand, to make the electronic engine control system synchronous. The calibrations and the refined listed plans allow to obtain a concrete performance increase of the engine.
Technical data
- Carburation adjustment
-Rev limiter: 10,000 RPM
