- Reduced price
- New

Xmotorstore Payments
Malossi F37R fork 4616965B
Malossi code: 4616965B.
Technical features:
-Head tube in special high resistance steel, machined on CN machines.
-Trapezoid in forged alloy steel, machined with CN machines.
-Sliding tubes of Ø 37 mm in special ground steel, lapped with chrome coating to ensure exceptional smoothness.
-Leggings in special extruded aluminum alloy (Anticorodal), machined from solid with CN machines and anodized.
-Wheel attachments in special aluminum alloy machined from solid material for chip removal.
-Single cartridge hydraulic system with sliding on D.U. bushings. and oscillating oil seal bushing to limit sliding friction to very low values.
-Fine adjustment of spring preload.
-Adjustment of rebound braking.
-Adjustment of compression braking.
-Fork travel equal to 90 mm.
Malossi F37R fork 4616965B
Malossi code: 4616965B.
Technical features:
-Head tube in special high resistance steel, machined on CN machines.
-Trapezoid in forged alloy steel, machined with CN machines.
-Sliding tubes of Ø 37 mm in special ground steel, lapped with chrome coating to ensure exceptional smoothness.
-Leggings in special extruded aluminum alloy (Anticorodal), machined from solid with CN machines and anodized.
-Wheel attachments in special aluminum alloy machined from solid material for chip removal.
-Single cartridge hydraulic system with sliding on D.U. bushings. and oscillating oil seal bushing to limit sliding friction to very low values.
-Fine adjustment of spring preload.
-Adjustment of rebound braking.
-Adjustment of compression braking.
-Fork travel equal to 90 mm.
Reference: 4616135
Brand: Malossi
Malossi F37R 4616135 fork kit for Gilera Malossi code: 4616135. Technical features: Technical features: -Head tube in special high resistance steel, machined on CN machines. -Trapezoid in forged alloy steel, machined with CN machines. -Sliding tubes of Ø 37 mm in special ground steel, lapped with chrome coating to ensure exceptional smoothness. -Leggings...
Reference: 2213102
Brand: Malossi
Malossi pipe kit (front / rear) for MHR brake (aeronautical) Malossi code: 2213102 Malossi brake pipe for GILERA NEXUS 500 ie 4T LC euro 2-3.
Reference: 171.0666
Brand: POLINI
APRILIA: AMICO 50 - AREA 51 - GULLIVER 50 - GULLIVER 50 LC - RALLY 50 - RALLY 50 LC - SONIC 50 (CY) - SONIC 50 GP (CY) - SR 50 2T R, FACTORY (Piaggio) LC - SR 50 2T mod.1993 - SR 50 2T mod.94, 95, 96 H2O - SR 50 2T LC STEALTH, RACING, NETSCAPER - SR 50 2T mod.94, 95, 96 Air - SR 50 2T WWW - SCARABEO 50 2T (Yamaha) - SR 50 2T R, FACTORY (Piaggio) LC...
Reference: 241.759
Brand: POLINI
Polini variator for Peugeot NECO 50 4T Euro 5. Code: 241,759 Application: Sym variator, variator for Sym Orbit 50 4T. The HI-Speed Polini variator for Peugeot Speedfight and NECO scooters 50 4T Euro 5 offers excellent performance and returns without compromising the safety and reliability of the scooter. Semipuleggia is designed with different degrees to...
Reference: FM10101-40
Brand: Formula
Formula rear braided brake hose for minimoto. The Formula braided brake hose for minimoto improves braking and guarantees constant braking intensity even under stress, ideal as a replacement for your original. Formula tube length: 89 cm Formula Code: FM10101-40
Reference: 241.688
Brand: POLINI
Polini Variator for Hi speed Yamaha Zuma Bw's 125 4T Mbk X Over Code: 241.688 Variator supplied with a series of rollers 19x17 gr. 9 Application: Mbk, Mbk Flame 125 X, Mbk Waap 125, Mbk X-Over 125, Yamaha, Yamaha Cygnus X 125 4T Carburetor, Yamaha Vity 125, Yamaha Zuma 125i 4T, Yamaha Bw's 125 4T i, Yamaha Gtr Aero 125, Aeon, Aeon Oz 150
Reference: 07149211
Continuous adjustment Min/max operating temperature: -20 to 60°C Nozzle hole diameter: 2.9mm Max operating pressure: 16 bar Material: Polyoxymethylene Pneumatic Connection: 1/4 inch FT Ergonomic insulated handle Lightweight and robust design
Reference: 01.MA.0032.L
Brand: Ohvale
Clutch cable Ohvale 110 4S up to 2021. Ohvale code: 01.MA.0032.L
Reference: Rpha-1-Diablo
Brand: HJC
Helmet Hjc Rpha 12 Diablo Graphic. With the release of Blizzard Entertainment®'s highly anticipated game Diablo IV on June 6, HJC delves into the dark realm with its latest collaboration and all-new intimidating graphic, the Diablo Graphic helmet. With the HJC Diablo helmet, riders can feel the raw power and intensity of the game pulsating through their...
Reference: 1115380B
Brand: Malossi
Complete Malossi gasket kit for 52 diameter cylinder kit (multi-thickness - O-RING) BIG BORE Malossi code: 1115380B
Reference: 01.SZ.0133.L
Brand: Ohvale
Ohvale Dowel pin 8×12×7Code: 01.SZ.0133.L
Reference: 01.SE.0007.L
Brand: Ohvale
Ohvale fuel tank ring nut Code: 01.SE.0007.L
Reference: 6215020BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215020BS Malossi brake pads for APRILIA SRV 850 ie 4T LC euro 3 (PIAGGIO M554M) Front NOT APPROVED The lack of approval does not limit their assembly Malossi brake pads for GILERA GP 800 4T LC (PIAGGIO M554M) Front APPROVED Malossi brake pads for GILERA NEXUS 500 ie 4T LC euro 2-3 Front APPROVED Malossi...
Reference: Ohvale gp-7 RACE
Brand: Ohvale
The Race version of the Ohvale GP-7 250 is built for riders who demand top-tier performance: STM slipper clutch, Öhlins suspension, integrated quickshifter, and AIM data acquisition. Full race-spec, no compromises.
Reference: 144.270.001
Brand: POLINI
Polini minimotard rubber intake manifold. Polini Code: 144.270.001
Reference: A264
Brand: Alfano
26 mm adapter for Alfano A264 temperature sensor. This adapter must be used with sensors: A2101 / A2111 / A2152.
Reference: 01.MO.0052.L
Brand: Ohvale
Ohvale ZS 160 cc 4S Sealed Engine 01.MO.0052.L New Ohvale ZS 160 cc 4-speed engine. The ZS "ZongShen" engine is Ohvale's official choice for original equipment, reliable and with excellent performance, it allows amateur but also racing use. Attention: Engine with Ohvale seals. Attention: Engine for racing use only, not usable for road use!. Illustrative...
Malossi F37R fork 4616965B
Malossi code: 4616965B.
Technical features:
-Head tube in special high resistance steel, machined on CN machines.
-Trapezoid in forged alloy steel, machined with CN machines.
-Sliding tubes of Ø 37 mm in special ground steel, lapped with chrome coating to ensure exceptional smoothness.
-Leggings in special extruded aluminum alloy (Anticorodal), machined from solid with CN machines and anodized.
-Wheel attachments in special aluminum alloy machined from solid material for chip removal.
-Single cartridge hydraulic system with sliding on D.U. bushings. and oscillating oil seal bushing to limit sliding friction to very low values.
-Fine adjustment of spring preload.
-Adjustment of rebound braking.
-Adjustment of compression braking.
-Fork travel equal to 90 mm.