Xmotorstore Payments
Pair of Malossi Twins rear shock absorbers 4613169 for Malaguti
Malossi code: 4613169
Pair of Malossi Twins rear shock absorbers, 405 mm wheelbase.
Technical features:
-Type: oil-pneumatic shock absorber
-Road use
-12 mm shock absorber rod in hardened and tempered C43 steel
-Piston in steel and sintered bronze
-New Swedish steel lamellar system
-Piston guide shoe of the LUBRIFLON-PTFE B70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (compound obtained by sintering a layer of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Spring pre-load adjustment via 4-position ring nut
-Special oil with low viscosity and practically insensitive to temperature variations
Pair of Malossi shock absorbers for:
Pair of Malossi shock absorbers for Malaguti PassWord CK 250 4T LC.
Reference: 4619465B
Brand: Malossi
Buffer for Malossi shock absorber limit switch 4619465B Malossi code: 4619465B.
Reference: IMA-01050
Brand: CS Racing
Cylinder for 40cc air-cooled minibike with Iame Cs brand cast iron barrel, it is possible to use the following flanges for this cylinder: flange 10, flange 12, flange 15, free exhaust. DELIVERY TIME: 90 DAYS
Reference: RF160cc
Brand: Lem motor
Pitbike RF sport 160cc, the most dynamic pitbike on the market for kids up to 16 years of age, with reinforced frame, upside-down fork, kick start and sport engine. Oversized version with 17/14 wheel
Reference: 243.046
Brand: POLINI
Polini contrast spring for Quartz evolution white Code: 243.046 Application: Aprilia, Aprilia Area 51, Aprilia Gulliver 50/50 Lc, Aprilia Rally 50/50 LC, Aprilia Scarabeo 50 2T / 50 2T street restyling Piaggio, Aprilia Sr 50 2T R / 50 2T mod. 1993/50 2T mod. 94 , 95, 96 H2O / 50 2T Lc stealth / 50 2T mod. 94, 95, 96 Air / 50 2T WWW, Atala, Atala Carosello...
Reference: 143.355.001
Brand: POLINI
Or water pump transmission (142.5x3.53 mm). Polini code: 143.355.001. Or water pump transmission for minimoto.
Reference: GHR 060.001
Brand: GHR
Minibike silencer Ghr. Metal silencer compatible with Cs, Ghr, Bzm exhausts.
Reference: 01.FO.0021.L
Brand: Ohvale
Swingarm Ohvale pivot M12x220 complete for Gp-0 Gp-2 Code: 01.FO.0021.L
Reference: 3219290
Brand: Malossi
Malossi 3219290 Power Exhaust for Vespa PK 50 Code: 3219290 In Malossi there was a strong desire to associate the glorious C.V.F. and to the reed valve fuel systems that have been the focal point of the evolution of steel-bodied scooters, a series of special mufflers. The new POWER EXHAUST, sports exhaust systems, recalculated, with a modern and gritty...
Reference: 380.1080
Brand: POLINI
Main jet Mikuni. Polini main jet for Mikuni carburetor.
Reference: 01.CA.0006.G
Brand: Ohvale
Ohvale Rear fender unpainted Codice: 01.CA.0006.G
Reference: 204.0384
Brand: POLINI
Vespa 50cc 57.9mm piston. Polini Code: 204.0384
Reference: 01.SD.0203.L
Brand: Ohvale
Ohvale Bolt countersink M6x15 Code: 01.SD.0203.L
Reference: 133.1011.1
Brand: POLINI
Polini special edition kit for Minarelli AM6 and Derbi engines 133.1011.1 Polini Special Edition kit for Minarelli AM6 with 80cc cylinder kit, reinforced crankshaft and high-performance overhaul kit.
Reference: 143.310.002
Brand: POLINI
Reverse engine ignition nut with starter coupling. Replacement for Polini reverso minimoto. Polini Code: 143.310.002
Reference: 5211481
Brand: Malossi
Adjustable automatic clutch Malossi Maxi Delta clutch 5211481 Malossi code: 5211481 Adjustable automatic clutch Maxi Delta clutch for clutch bell diameter 134 mm.
Pair of Malossi Twins rear shock absorbers 4613169 for Malaguti
Malossi code: 4613169
Pair of Malossi Twins rear shock absorbers, 405 mm wheelbase.
Technical features:
-Type: oil-pneumatic shock absorber
-Road use
-12 mm shock absorber rod in hardened and tempered C43 steel
-Piston in steel and sintered bronze
-New Swedish steel lamellar system
-Piston guide shoe of the LUBRIFLON-PTFE B70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (compound obtained by sintering a layer of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Spring pre-load adjustment via 4-position ring nut
-Special oil with low viscosity and practically insensitive to temperature variations
