Xmotorstore Payments
Polini evolution gear casing for Piaggio Ciao mopeds. Polini code: 170.0309.
All the technical innovations of the Polini Evolution Gear Carter have been designed to increase resistance in the most demanding uses and guarantee robustness in the case of racing uses.
The new crankcase is characterized by a modern and integrated design with various technical features:
Increase in bearing seat sections to increase rigidity.
Revised wheel axle bearing with a larger diameter.
All pressed roller bearings and oil seals with spring loaded radial sealing lip.
5 hex head screws compared to the 4 hex head screws in the original reducer.
The gasket that seals the two crankcases is made up of a layer of aluminum to increase rigidity and two surface layers of rubber for sealing which guarantee its durability over time.
The Polini Evolution gear cover for Piaggio mopeds can be mounted both with the original gears and with Polini gears (code 202.1425 and 202.1427 or 202.1426) combined with the shims code 246.058 (Attention: after mounting the Polini gear cover, the "bicycle" mode will not can be used).
Polini evolution gear casing for Piaggio Ciao mopeds. Polini code: 170.0309.
All the technical innovations of the Polini Evolution Gear Carter have been designed to increase resistance in the most demanding uses and guarantee robustness in the case of racing uses.
The new crankcase is characterized by a modern and integrated design with various technical features:
Increase in bearing seat sections to increase rigidity.
Revised wheel axle bearing with a larger diameter.
All pressed roller bearings and oil seals with spring loaded radial sealing lip.
5 hex head screws compared to the 4 hex head screws in the original reducer.
The gasket that seals the two crankcases is made up of a layer of aluminum to increase rigidity and two surface layers of rubber for sealing which guarantee its durability over time.
The Polini Evolution gear cover for Piaggio mopeds can be mounted both with the original gears and with Polini gears (code 202.1425 and 202.1427 or 202.1426) combined with the shims code 246.058 (Attention: after mounting the Polini gear cover, the "bicycle" mode will not can be used).
Reference: 01.SB.0315.L
Brand: Ohvale
Ohvale Timing driving sprocketCode: 01.SB.0315.L
Reference: 6718380b
Brand: Malossi
Malossi HTQ secondary gears z 15 / 41 with toothed spline 6718380b Malossi code: 6718380b. Transmission gears in special steel with straight teeth and recalculated ratio. They completely eliminate any axial thrust, reducing stress on the bearings. Made with very high precision machines, casehardened, tempered and ground in order to provide high...
Reference: 143.730.002
Brand: POLINI
Complete 5 "rear Polini rim. Polini Code: 143.730.002
Reference: 203.0142
Brand: POLINI
Suzuki Burgman 400cc air filter. Polini Code: 203.0142
Reference: 140.0208
Brand: POLINI
Polini cylinder kit 52 mm stroke 44 mm connecting rod 85 mm for Piaggio Zip h2o (pin 13 mm). Polini Code: 140.0208. Attention this kit must be mounted with motor shaft code 210.0021.
Reference: 201.1906
Brand: POLINI
Polini carburetor for Ape 50 diameter 19 mm. Polini Code: 201.1906. Polini Cp carburetor for: Piaggio, Piaggio Ape 50, Piaggio Ape 50 FL, Polini. It is mounted on the original Piaggio manifold. Polini carburetor calibration for Ape: Maximum jet 86 Minimum Jet 32 Needle 14/22 24x30 valve Pulverizer bush diameter 2.6 mm Mixer connection: YES.
Reference: 242.154
Brand: POLINI
Polini rollers 20x12. Available in the variants: 242.150 ROLLS 20X12 GR.15,4 242.151 ROLLS 20X12 GR.14.1 242.152 ROLLS 20X12 GR.13,0 242.153 ROLLS 20X12 GR.10.1 242.154 ROLLS 20X12 GR. 9.2 242.155 ROLLS 20X12 GR. 8.5 242.292 ROLLS 20X12 GR.11,0 242.294 ROLLS 20X12 GR. 8.0 242.295 ROLLS 20X12 GR. 8.9 242.297 ROLLS 20X12 GR.12,0
Reference: 03.MA.0003.G
Brand: Ohvale
Left handlebar collar Gp-2 and Gp-0 Evo Ohvale. Ohvale code: 03.MA.0003.G Left collar for Ohvale Gp-2 handlebars. Left collar for Ohvale Gp-0 EVO 110 4S 160 handlebars.
Reference: 209.0460
Brand: POLINI
Gasket set Derbi Gpr 39.88 mm 209.0460
Reference: 5515703
Brand: Malossi
Vespower Malossi voltage regulator kit 5515703 Code: 5515703 Line of complete ignitions for the entire vintage Vespa gear range. To allow perfect and easy installation, a specific version has been studied for each model. Ignition is distinguished by: - Lightened flywheel (weight 1.2 kg) with moment of inertia as per table, obtained from a forged with...
Reference: 171.0001
Brand: POLINI
Polini ecu control unit, code 171.0001 Polini ecu control unit (eletronic control unit) Polini ECU for: Honda, Honda SH 125, Honda SH 150, Yamaha, Yamaha X City 125, Yamaha X Max 125, Mbk, Mbk Cityliner 125, Mbk Skycruiser 125, Vespa, Vespa 125, Vespa 150, Piaggio, Piaggio Fly 125, Piaggio Liberty 125, Piaggio Liberty 150 Wiring to be combined with Polini...
Reference: 01407-00
Brand: DELLORTO
Dellorto PHVA 17.5 ED carburettor. Dellorto Code: 01407 The Dellorto phva 17.5 carburettor is universal, compatible with most scooters. Phva 17.5 ED Dellorto calibrations: Inlet air inlet diameter 35mm. 24 mm rubber connection diameter. Manual mechanical air starter Oil outlet Standard jet 30 guillotine A7 injector needle 211FA Atomizer 65 main jet 34...
Reference: 3113066
Brand: Malossi
Malossi cylinder kit diameter 47 in cast iron with pin diameter 12 Malossi code: 3113066 Malossi cylinder kit for BENELLI PEPE LX 50 2T euro 2 QJ1E40QMB-4 to be mounted exclusively with Malossi exhausts. Malossi cylinder kit for BENELLI QuattronoveX 50 2T euro 2 to be mounted exclusively with Malossi exhausts. Malossi cylinder kit for CPI ARAGON GP 50 2T...
Reference: GHR 001.002
Brand: GHR
Complete Ghr minimoto engine gp1 h2o 50 factory racing. The engine is supplied complete with muffler, silencer.
Reference: 1612208
Brand: Malossi
Malossi phbg 21 ds 1612208 fuel system Malossi code: 1612208 Malossi phbg 21 bs fuel system with mixer connection Application: Malossi fuel system for APRILIA RS 50 2T LC (MINARELLI AM 3 > 6) for vehicles PRODUCED 2000 --> Malossi fuel system for APRILIA TUONO 50 2T LC (MINARELLI AM 6) Malossi fuel system for BETA RR ENDURO 50 2T LC (MINARELLI AM...
Reference: 143.680.002
Brand: POLINI
Polini minimoto starter wheel, compatible with Polini starter and others. The rope winder wheel is used to engage the ignition with the flywheel, in order to start the minimoto. Wheel external diameter: 71 mm Rope channel: 3.5 mm Polini Code: 143.680.002
Polini evolution gear casing for Piaggio Ciao mopeds. Polini code: 170.0309.
All the technical innovations of the Polini Evolution Gear Carter have been designed to increase resistance in the most demanding uses and guarantee robustness in the case of racing uses.
The new crankcase is characterized by a modern and integrated design with various technical features:
Increase in bearing seat sections to increase rigidity.
Revised wheel axle bearing with a larger diameter.
All pressed roller bearings and oil seals with spring loaded radial sealing lip.
5 hex head screws compared to the 4 hex head screws in the original reducer.
The gasket that seals the two crankcases is made up of a layer of aluminum to increase rigidity and two surface layers of rubber for sealing which guarantee its durability over time.
The Polini Evolution gear cover for Piaggio mopeds can be mounted both with the original gears and with Polini gears (code 202.1425 and 202.1427 or 202.1426) combined with the shims code 246.058 (Attention: after mounting the Polini gear cover, the "bicycle" mode will not can be used).
