Xmotorstore Payments
hi-speed e-bike brose - special.t.levo/kenevo/mahle special.sl 5 pin 950.830.052
POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly with the original ones while maintaining their water resistance. Installation takes place in a few minutes without opening the engine or removing the original seals and is totally invisible as its housing uses the internal space of the engine cover. It is totally reversible and you can return to the original configuration in a few minutes. Without battery as it is self-powered.
For BOSCH Smart System, by default it has unlocking always active and the correct speed is indicated by the last 2 digits on the display, for example 12.5 corresponds to 25 km/h.
For Brose and Specialized, they are activated via the WALK button and show the correct speed.
For Specialized with Mahle engine, the speedometer will always show half your actual speed, the same thing for km. To know the exact speed and km, just double it.
Extra Notes:
The HI-Speed for the Bosch Smart system makes the bike more responsive thanks to a different sensor reading by slightly shifting the engine power delivery curve.
The HI-Speed for Specialized and for Brose does not require removing the engine from the bike as it connects directly to the display.
hi-speed e-bike brose - special.t.levo/kenevo/mahle special.sl 5 pin 950.830.052
POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly with the original ones while maintaining their water resistance. Installation takes place in a few minutes without opening the engine or removing the original seals and is totally invisible as its housing uses the internal space of the engine cover. It is totally reversible and you can return to the original configuration in a few minutes. Without battery as it is self-powered.
For BOSCH Smart System, by default it has unlocking always active and the correct speed is indicated by the last 2 digits on the display, for example 12.5 corresponds to 25 km/h.
For Brose and Specialized, they are activated via the WALK button and show the correct speed.
For Specialized with Mahle engine, the speedometer will always show half your actual speed, the same thing for km. To know the exact speed and km, just double it.
Extra Notes:
The HI-Speed for the Bosch Smart system makes the bike more responsive thanks to a different sensor reading by slightly shifting the engine power delivery curve.
The HI-Speed for Specialized and for Brose does not require removing the engine from the bike as it connects directly to the display.
Reference: 215.0443
Brand: POLINI
Polini 360 ° 35mm intake manifold sleeve. Polini Code: 215.0443
Reference: 1019
Brand: STAMAS
Spacer aluminium fixing swingarm midi Stamas
Reference: 01.FA.0007.L
Brand: Ohvale
Tcei screw m6x40 uni 5931 Ohvale. Ohvale Code: 01.FA.0007.L
Reference: 3216694
Brand: Malossi
Malossi Flip exhaust approved 3216694 Code: 3216694 Expansion MUFFLER in special steel sheet (thickness 1.5 mm), obtained with molding processes. With internal silencing bulkheads, aluminum alloy support bracket with anti-vibration connection. Transparent fired varnish. Regenerable aluminum SILENCER.
Reference: 241.619
Brand: POLINI
Polini Variator for Hi speed Honda Sh Bali 125/150 4T Code: 241.619 Variator supplied with two series of 20x17 9 gr. Rollers. and 13.2 gr. Application: Honda, Honda @ 125/150, Honda Nes 125/150, Honda Bali 125/150, Honda Dylan 125/150, Honda Pantheon 125 Inject / 150 Inject, Honda Ps 125i, Honda Sh 125 / 125i / 150 / 150i, Honda S Wing 125/150, Honda Ps...
Reference: SlidersFalco-minimoto
Brand: Falco
Plastic sliders for Falco minimoto shoes. Replacement sliders for Falco minimoto boots, compatible with 771 stroke and 770 hot-wheels models. Available: Red Falco sliders Falco blue sliders Black Falco sliders
Reference: 03.ST.0004.L
Brand: Ohvale
Ohvale steering stem retaining ring. Compatible with: Ohvale GP-2 steering stem retaining ring. Ohvale GP-0 steering stem retaining ring for 110 4S Evo and 160 Evo. Ohvale GP-7 steering stem retaining ring. Ohvale Part Number: 03.ST.0004.L
Reference: 1118568B
Brand: Malossi
Complete Malossi gasket kit for 46.5 diameter cylinder kit Malossi code: 1118568B
Reference: 29 8324.v0
Brand: Malossi
Malossi variator contrast spring purple (external diameter 57.80x91 mm - wire diameter 4.0 mm - k 5.5) Malossi code: 29 8324.v0 Springs in high carbon silicon alloy steel, heat treated, dynamically balanced, oven painted and designed and calculated for each specific application.
Reference: kit-aggiornamento-forcellone-gp-2
Brand: Ohvale
Original Ohvale GP-2 swingarm update kit MY2026. Improves traction and stability under acceleration.
Reference: 4613598
Brand: Malossi
Malossi Rs24 4613598 rear shock absorber for Yamaha T Max Malossi code: 4613598 Malossi rear Rs24 shock absorber, wheelbase 316 mm. -Oleopneumatic suspension with pressurized nitrogen chambers. -Hydraulic extension adjustment. -Patented spring preload adjustment. - Vehicle trim adjustment. -Stroke 48 mm. -Outer sheath in ergal 55 with cobalt blue anodic...
Reference: 143.025.005
Brand: POLINI
Segmento 40x1 mm cromato Polini per minimoto 50cc. Codice Polini: 143.025.005
Reference: 02783
Brand: DELLORTO
Carburetor Dellorto PHBL 25 BD 2t manual air cable 02783. Carburetor model PHBL 25 BD. Dellorto code: 02783. Carburetor PHBL 25 BD - Product Sheet. Technical features: Model: PHBL 25 BD. Diffuser: 25 mm. Engine connection: Elastic (Male) ø31 mm. Filter connection: ø38 mm. Starter device (air): Manual air with cable control. Engine compatibility: 2...
Reference: 6718823
Brand: Malossi
Malossi primary gear shaft for complete Over Range transmission group 6718823 Malossi code: 6718823 This shaft has been reinforced with an increase in the diameter of the stem to 13.5 mm and to be prepared for a possible external support it is supplied with nut, oil seal and roller shell useful for assembly. Attention: to be able to mount the primary gear...
Reference: 01.SW.0309.L
Brand: Ohvale
Ohvale Bolt M6x16Code: 01.SW.0309.L
Reference: 242.214
Brand: POLINI
Polini rollers 25X21,8 pieces 5. Available: 242.209 ROLLS 25X21.8 GR.14.2 242.215 ROLLS 25X21.8 GR.16.3 242.216 ROLLS 25X21.8 GR.17.0 242.211 ROLLS 25X21.8 G. 20.8 242.212 ROLLS 25X21.8 G. 24.1 242.218 ROLLS 25X21.8 G. 22.0
hi-speed e-bike brose - special.t.levo/kenevo/mahle special.sl 5 pin 950.830.052
POLINI HI-Speed is an electronic device designed for E-bike motors in order to circumvent the motor stopping at 25 km/h and consequently increase active assistance by fully exploiting the performance that the motor can offer. Polini HI-Speed is very easy to install as the connectors interface directly with the original ones while maintaining their water resistance. Installation takes place in a few minutes without opening the engine or removing the original seals and is totally invisible as its housing uses the internal space of the engine cover. It is totally reversible and you can return to the original configuration in a few minutes. Without battery as it is self-powered.
For BOSCH Smart System, by default it has unlocking always active and the correct speed is indicated by the last 2 digits on the display, for example 12.5 corresponds to 25 km/h.
For Brose and Specialized, they are activated via the WALK button and show the correct speed.
For Specialized with Mahle engine, the speedometer will always show half your actual speed, the same thing for km. To know the exact speed and km, just double it.
Extra Notes:
The HI-Speed for the Bosch Smart system makes the bike more responsive thanks to a different sensor reading by slightly shifting the engine power delivery curve.
The HI-Speed for Specialized and for Brose does not require removing the engine from the bike as it connects directly to the display.
