Xmotorstore Payments
Malossi Gp mhr exhaust 3212214 for Peugeot
Code: 3212214
The racing muffler born on the track for the track.
It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs.
Malossi trophies are raced all over the world according to precise formulas, which foresee by regulation pairings of different special Malossi corsa products for each category, in order to achieve optimal and homogeneous results among the various competitors with the use of the most advanced technologies.
With the GP mhr mufflers, Malossi expands the range of trophy mufflers, which express the maximum performance in the sector.
Another Malossi initiative to give the opportunity to all young people who intend to practice a sporting activity in the world of two wheels to become the riders of the future.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 8/10 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. and handcrafted oxy-acetylene welding. Transparent varnish.
SILENCER in aluminum, anodized Nitro blue.
Malossi exhaust for:
3212214 MALOSSI EXHAUST GP MHR PEUGEOT XR6 50 2T LC (MINARELLI AM 6)
Reference: 001002R03100
Brand: DM
Universal quick throttle control for minimoto, produced by Dm, compatible with: Stamas, Dm, Blata, Grc, Polini and others. Compatible with 21/22 mm handlebars. Knob length 115 mm. Total length of throttle control 145 mm. Code: 001002R03100.
Reference: 01.SZ.0601.L
Brand: Ohvale
Ohvale Cylinder stud bolt BCode: 01.SZ.0601.L
Reference: 6711135
Brand: Malossi
Malossi HTQ secondary gears z 15 / 55 with forced fit diameter 17 mm 6711135 Malossi code: 6711135. Transmission gears in special steel with straight teeth and recalculated ratio. They completely eliminate any axial thrust, reducing stress on the bearings. Made with very high precision machines, casehardened, tempered and ground in order to provide high...
Reference: 5514780
Brand: Malossi
Malossi Force Master 2 5514780 electronic control unit Code: 5514780 Malossi Force Master 2 electronic control unit for injection vehicles The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders. Carburation adjustment ± 20% at min/average/max Rev Limiter: +1,000 RPM Original 9,500 - Malossi...
Reference: 11 7268
Brand: Malossi
Complete Malossi gasket kit for 65 diameter cylinder kit for Honda 125cc motorcyclesMalossi code: 11 7268
Reference: 2917874.v0
Brand: Malossi
Malossi variator contrast spring purple for Kymco AK with external diameter 70.75x105 mm Malossi code: 2917874.v0 Springs in high carbon silicon alloy steel, heat treated, dynamically balanced, oven painted and designed and calculated for each specific application.
Reference: 230.0016
Brand: POLINI
Vespa 50 FL / Ape 50 FL clutch discs series (4 discs), code 230.0016 Clutch discs instruction: We advise you to keep the new cork discs in oil overnight before assembly. Clutch discs series for: Piaggio, Piaggio Ape 50 FL, Vespa, Vespa 125 2t fl, Vespa 50 2t hp
Reference: 248.131
Brand: POLINI
Polini variator belt for Honda 125/150 PCX Polini variator belt for Honda 125/150 PCX from 2018 Code: 248.131 Application: Honda, Honda Pcx 125 ie Euro 4/150 Euro 4
Reference: 244.0131
Brand: POLINI
Polini Air Speed Evolution self-ventilating half-pulley 14 degrees for Piaggio. Polini code: 244.0131 The Polini Air Speed Evolution self-ventilating half-pulley has been designed for all scooters equipped with Polini Evolution engine crankcases and for prepared Piaggio engines. Made with an increased diameter of 115 mm and built in anodized aluminum...
Reference: 206.0288
Brand: POLINI
Polini segment dimensions 40.8x1.26 mm Universal Polini segment
Reference: 3217570
Brand: Malossi
Malossi RX Black Exhaust for Piaggio Medley Malossi Code: 3217570 Malossi exhaust for PIAGGIO MEDLEY 125 ie 4T LC euro 4 2016-2019 (MA01M). Malossi exhaust for PIAGGIO MEDLEY 150 ie 4T LC euro 4 2016-2019.
Reference: Gp-2-190-4t-RACE
Brand: Ohvale
Ohvale gp-2 190cc 4t RACE 2025. Ohvale gp-2 190cc Daytona 4t 4 gears RACE version. Accessories included in the RACE version: - Reversed gear lever. - Brembo front brake. - 230 mm disc. - Adjustable forks. - Quick Shifter. - Slipper Clutch. - Rtgs. - Db killer. - Wheel pads. Ohvale gp2 2025 technical sheet: ENGINE TYPE: Daytona 190 cc Horizontal single...
Reference: MINIMOTO KID
Brand: GIMOTO
Minibike suit for children, Gimoto brand. Cowhide (1.2 mm - 1.3 mm) Perforated version for greater ventilation Stretch inserts in G-nforced ™ CE EN 1621-1 approved protectors on shoulders, elbows, patella-shin Composite protections on hips and kidneys Elasticated bellows on shoulders, back and knees 3D ™ inner lining with elasticated inserts Knee sliders...
Reference: 144.020.007/A
Brand: POLINI
Complete Polini piston diameter 40.2 mm, selection A (40.155 mm) Complete Polini piston for minicross
Reference: 211.0012
Brand: POLINI
Polini cylinder head diameter 47-50 mm. Polini code: 211.0012 Polini cylinder head for: Piaggio, Piaggio Ape 50, Vespa, Vespa 50 Attention: use long-pitch spark plug.
Reference: 244.0124
Brand: POLINI
Polini fixed half-pulley in aluminum ceramic 14 degrees. Polini Code: 244.0124
Malossi Gp mhr exhaust 3212214 for Peugeot
Code: 3212214
The racing muffler born on the track for the track.
It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs.
Malossi trophies are raced all over the world according to precise formulas, which foresee by regulation pairings of different special Malossi corsa products for each category, in order to achieve optimal and homogeneous results among the various competitors with the use of the most advanced technologies.
With the GP mhr mufflers, Malossi expands the range of trophy mufflers, which express the maximum performance in the sector.
Another Malossi initiative to give the opportunity to all young people who intend to practice a sporting activity in the world of two wheels to become the riders of the future.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 8/10 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. and handcrafted oxy-acetylene welding. Transparent varnish.
SILENCER in aluminum, anodized Nitro blue.
