Xmotorstore Payments
Malossi 3219559 exhaust for Mhr Team 3 racing scooter diameter 47 mm
Code: 3219559
Scooter Racing Malossi mufflers have been designed and built with a single goal: to achieve the maximum possible performance in combination with the cylinder for which they were designed. Each evolutionary step of the Malossi exhaust systems is the result of fluid dynamic studies capable of determining with absolute precision the ideal shapes and dimensions of the Scooter Racing mufflers.
Only perfect mufflers characterized by an absolute homogeneity of production can boast the Malossi coat of arms. The production technology, in fact, is common to all Scooter Racing and the only differences between them are found exclusively in the division of the cones.
All Scooter Racing mufflers are made from sheet metal plates with an exact and constant thickness of 0.8mm, are laser cut, welded with maniacal precision and equipped with a calibrating nozzle whose dimensions are subject to the very strict tolerances necessary to guarantee that the pressure inside inside the muffler is always kept in the correct values.
The development of Scooter Racing mufflers goes hand in hand with that of Malossi cylinders and to obtain maximum performance it is essential to always match the muffler to the cylinder for which it was designed.
All Scooter Racing bikes are equipped with an aluminum silencer, anodized Nitro blue.
mhr TEAM 3 and mhr BIG BORE Ø 52
MHR Team 3 and MHR Big Bore Ø 52 are the NEW names of the Scooter Racing mufflers intended for the Testa Rossa Flanged Mount cylinders, 70 and 94cc respectively, and are characterized by a totally new cone profile, now facing upwards, and for the even more dynamic appearance.
The Malossi engineers achieved a considerable increase in power and focused particularly on rounding off its range of use, in order to broaden its field of action and find an effective setting more quickly. The rpm allowed for the engine has risen and expresses the maximum power values around 14,100 rpm for the 70cc, and 13,800 rpm for the 94cc.
The cylinder attachment system includes a four-hole light alloy fitting, designed to allow perfect passage of the burnt gases, optimizing the fluid dynamic flow. This solution derives directly from the one adopted by the MHR Team 2 mufflers, while it is completely new for the Ø 52 Big Bore version.
The connection system of the silencer in Nitro blue anodized aluminum has also been simplified, now connected to the expansion of the muffler thanks to an elegant and light system with a single fixing screw.
Malossi exhaust (To be combined EXCLUSIVELY with THERMAL UNIT 3115390) for:
APRILIA AREA 51 50 2T LC
APRILIA GULLIVER 50 2T LC
APRILIA SONIC 50 2T LC
APRILIA SR NETSCAPER 50 2T LC (MINARELLI)
APRILIA SR RACING 50 2T LC (MINARELLI)
APRILIA SR REPLICA 50 2T LC <-1999
APRILIA SR STEALTH 50 2T LC (MINARELLI)
BENELLI 491 SPORT 50 2T LC (MINARELLI)
BETA EIKON 50 2T LC
ITALJET DRAGSTER 50 2T LC
MALAGUTI F12 DIGIT KAT PHANTOM 50 2T LC
MALAGUTI F12 DIGIT KAT-PHANTOM 50 2T LC euro 2
MALAGUTI F12 R LC 50 2T LC euro 2
MALAGUTI F12-PHANTOM 50 2T LC
MALAGUTI F15 FIREFOX 50 2T LC
MBK MACH G 50 2T LC
MBK NITRO 50 2T LC
YAMAHA AEROX 50 2T LC euro 0-1
YAMAHA AEROX 50 2T LC euro 2
YAMAHA JOGRR 50 2T LC euro 2
Reference: 0619963
Brand: Malossi
2 Malossi O-rings diameter 57 Malossi code: 0619963
Reference: 3219348br
Brand: Malossi
Malossi silencer tube with external diameter 60 in anodized aluminum Malossi silencer tube with external diameter 60 in red anodized aluminum Malossi silencer tube with external diameter 60 in black anodized aluminum Malossi silencer tube with external diameter 60 in yellow anodized aluminum
Reference: 3219623
Brand: Malossi
Malossi silencer diameter 60 in aluminum for SCOOTER RACING MHR exhaust Malossi code: 3219623
Reference: 243.010
Brand: POLINI
Polini contrast springs kit Code: 243.010 Application: Piaggio, Piaggio Boss, Piaggio Boxer, Piaggio Bravo, Piaggio Cba, Piaggio Ciao, Piaggio Eco, Piaggio Grillo, Piaggio Si, Gilera, Gilera Cba
Reference: 404622
Brand: T4TUNE
Kymco Vitality front left indicator Code: 404622 Ean: 9900000060190
Reference: 5519463
Brand: Malossi
Malossi force master 2.1 ECU for Piaggio euro 5 engines. Malossi code: 5519463. With a whole new look, the Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi goal: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN...
Reference: 166.0076/R
Brand: POLINI
Polini cylinder kit diameter 47 mm racing model. Codice Polini: 166.0076/R Polini cylinder kit for: Aprilia, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sonic 50, Aprilia SR 50, Aprilia Scarabeo 50, Atala, Atala Carosello 50, Benelli, Benelli 491 50 GT, Benelli ST, Benelli K2 50, Benelli Naked 50, Benelli Pepe 50, Benelli Pepe 50 LX, Beta, Beta Ark 50,...
Reference: 1152.82.40.06
Brand: Domino
Domino black knobs open 1152.82.40.06 Material: Thermoplastic rubber Black colour Length: 124 left / 118 right End: Open Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 50 mm Handle diameter Knob mounted: 32 mm
Reference: 209.0400
Brand: POLINI
Series of gaskets manifold big valve Mbk booster for mbk booster and Polini
Reference: 01.IF.0068.L
Brand: Ohvale
Ohvale Kit pistons Code: 01.IF.0068.L
Reference: 01.PE.0016.L
Brand: Ohvale
Ohvale GP-0 and GP-2 shift lever. Ohvale code: 01.PE.0016.L Ohvale Gp-0 shift lever. Ohvale Gp-2 shift lever.
Reference: 171.0654
Brand: POLINI
Polini cooling fan for ignition Vespa PX-PE 125 150 200 CC 171.0654. VESPA: 150 2T PX, SPRINT VELOCE - 125 2T PX - 200 2T PE, PX.
Reference: 5119875
Brand: Malossi
Malossi Variator for Honda Forza 125cc ie 4t 5119875 MULTIVAR 2000 drive: When technology makes the difference. Multivar: the sports gearbox with burning acceleration that doesn't give space! A jewel to be embedded in your scooter. Too bad you can't show it, it's so perfect! Designed by highly experienced engineers, entirely produced in the Malossi...
Reference: 075109
Brand: C4
Peugeot Ludix air cylinder bearing and gasket kit
Reference: 203.0167
Brand: POLINI
Vespa 125cc 150cc 4t air filter. Polini Code: 203.0167
Reference: Bzm-101010
Brand: BZM
Minimoto bell Bzm d.80 m8 for h2o pulley. Clutch bell Bzm diameter 80 mm, for m8 pinion. Attention: Specific version for water pump pulley to the pinion.
Reference: 119.0091
Brand: POLINI
Polini 4 valve head kit for XP4 110 cc. Polini Code: 119.0091. Polini cylinder kit for: Polini, Polini minicross XP4T 110, Polini minimotard XP4T 110. This kit must be mounted exclusively in combination with code 119.0090. Polini thermal group kit for: Polini, Polini minicross XP4T 110, Polini minimotard XP4T 110 This kit is to be mounted only in...
Reference: 250.039
Brand: POLINI
Polini clutch bell for Piaggio Evolution model diameter 120 mm Code 250.039 This Polini clutch bell is compatible as an original spare. Spare parts for Polini Evolution P.R.E. Diameter: 120 mm Weight: 670 gr Application: Piaggio, Piaggio Zip 50 2T SP H2O
Reference: 6719478
Brand: Malossi
Malossi gear wheel set for Vespa gearbox 6719478 Malossi code: 6719478 Gear wheel set z 55/40/37/36 for Vespa gearbox. Kit with Z different from the original useful for providing a variable transmission ratio based on needs. The wheels can also be purchased individually to customize the transmission ratios in the 4 gears: 1st gear wheel Z55 item 6719255B...
Malossi 3219559 exhaust for Mhr Team 3 racing scooter diameter 47 mm
Code: 3219559
Scooter Racing Malossi mufflers have been designed and built with a single goal: to achieve the maximum possible performance in combination with the cylinder for which they were designed. Each evolutionary step of the Malossi exhaust systems is the result of fluid dynamic studies capable of determining with absolute precision the ideal shapes and dimensions of the Scooter Racing mufflers.
Only perfect mufflers characterized by an absolute homogeneity of production can boast the Malossi coat of arms. The production technology, in fact, is common to all Scooter Racing and the only differences between them are found exclusively in the division of the cones.
All Scooter Racing mufflers are made from sheet metal plates with an exact and constant thickness of 0.8mm, are laser cut, welded with maniacal precision and equipped with a calibrating nozzle whose dimensions are subject to the very strict tolerances necessary to guarantee that the pressure inside inside the muffler is always kept in the correct values.
The development of Scooter Racing mufflers goes hand in hand with that of Malossi cylinders and to obtain maximum performance it is essential to always match the muffler to the cylinder for which it was designed.
All Scooter Racing bikes are equipped with an aluminum silencer, anodized Nitro blue.
mhr TEAM 3 and mhr BIG BORE Ø 52
MHR Team 3 and MHR Big Bore Ø 52 are the NEW names of the Scooter Racing mufflers intended for the Testa Rossa Flanged Mount cylinders, 70 and 94cc respectively, and are characterized by a totally new cone profile, now facing upwards, and for the even more dynamic appearance.
The Malossi engineers achieved a considerable increase in power and focused particularly on rounding off its range of use, in order to broaden its field of action and find an effective setting more quickly. The rpm allowed for the engine has risen and expresses the maximum power values around 14,100 rpm for the 70cc, and 13,800 rpm for the 94cc.
The cylinder attachment system includes a four-hole light alloy fitting, designed to allow perfect passage of the burnt gases, optimizing the fluid dynamic flow. This solution derives directly from the one adopted by the MHR Team 2 mufflers, while it is completely new for the Ø 52 Big Bore version.
The connection system of the silencer in Nitro blue anodized aluminum has also been simplified, now connected to the expansion of the muffler thanks to an elegant and light system with a single fixing screw.
