- Reduced price
- New
Xmotorstore Payments
Polini ignition for Piaggio Hello. Polini code: 171.0556
Polini ignition for Piaggio mopeds.
Compatible with Piaggio: BOXER - BRAVO - CBA - CIAO - ECO - GRILLO - SI.
For a product in which it is increasingly difficult to find original spare parts, Polini is also attentive to the details that can make the difference.
For this reason it features the 12 volt electronic ignition intended for all Piaggio mopeds with electronic ignition.
Assembly is simple and plug in, so no adjustments are needed.
Polini proposes the installation with two balancing flanges (to be purchased separately), which allow the ignition to be always balanced and without any vibration:
171.0679 (flange for mounting on engines with original crankshaft)
171.0680 (flange for mounting on motors with full frame motor shafts)
The rare earth magnet flywheel is lighter, with a lower mass of inertia than others on the market, and allows for a better housing than the competition. This means that the fan is larger and therefore allow for greater cooling.
Very important technical characteristics, which guarantee better acceleration, easier cooling and more gritty performance.
Polini ignition for Piaggio Hello. Polini code: 171.0556
Polini ignition for Piaggio mopeds.
Compatible with Piaggio: BOXER - BRAVO - CBA - CIAO - ECO - GRILLO - SI.
For a product in which it is increasingly difficult to find original spare parts, Polini is also attentive to the details that can make the difference.
For this reason it features the 12 volt electronic ignition intended for all Piaggio mopeds with electronic ignition.
Assembly is simple and plug in, so no adjustments are needed.
Polini proposes the installation with two balancing flanges (to be purchased separately), which allow the ignition to be always balanced and without any vibration:
171.0679 (flange for mounting on engines with original crankshaft)
171.0680 (flange for mounting on motors with full frame motor shafts)
The rare earth magnet flywheel is lighter, with a lower mass of inertia than others on the market, and allows for a better housing than the competition. This means that the fan is larger and therefore allow for greater cooling.
Very important technical characteristics, which guarantee better acceleration, easier cooling and more gritty performance.
Reference: 170.0201
Brand: POLINI
Polini For Race lamellar engine casing for Piaggio Ciao and Si. Polini code: 170.0201. Polini studies a new lamellar crankcase to house 3 or 4 stud cylinders. Great news from Polini, which adds the Polini For Race reed valve crankcase for Piaggio Ciao and Si to its already rich catalogue. As per Polini DNA, the study and production comes with the aim of...
Reference: 171.0679
Brand: POLINI
Polini flywheel mass for original Ciao Si crankshaft. Polini code: 171.0679 Compatible with Piaggio: BOXER - BRAVO - CBA - CIAO - ECO - GRILLO - SI. Flange for mounting on engines with original crankshaft.
Reference: 171.0680
Brand: POLINI
Polini flywheel mass for full shoulder shaft Ciao Si. Polini code: 171.0680 Compatible with Piaggio: BOXER - BRAVO - CBA - CIAO - ECO - GRILLO - SI. Flange for mounting on motors with full frame motor shafts.
Reference: 140.0136
Brand: POLINI
Polini cylinder kit 47 mm pin 12 for Piaggio Ciao. Polini code: 140.0136 The new Polini 47 cast iron cylinder kit with 4 studs has been designed for a specific combination with the Polini For Race crankcase for all Ciao, Si, Bravo, Boss, Grillo mopeds. The drilling involves fixing the cylinder using 4 studs which guarantee a more efficient distribution of...
Reference: 210.0074
Brand: POLINI
Polini crankshaft pin 12 solid shoulders for Piaggio Ciao. Polini code: 210.0074 The new Polini crankshaft with Ø 12 full shoulder pin is offered in exclusive combination with the Polini For Race lamellar crankcase. The Polini For Race Ø 12 crankshafts for Piaggio Ciao and SI have forged and copper-plated connecting rods and are supplied complete with the...
Reference: 01.SD.0610.L
Brand: Ohvale
Ohvale Bolt hexagon flange M6x90 Code: 01.SD.0610.L
Reference: 202.1378
Brand: POLINI
Elongated primary gear Piaggio Z 13-40 model 1999 Code: 202.1378 Application: Aprilia, Aprilia Sr 50 2T R, Derbi, Derbi Gp1 50 2001-2003, Gilera, Gilera Ice 50, Gilera Runner 50, Gilera Stalker 50, Gilera Storm 50, Gilera Typhoon 50 up to 1999/50 XR, Piaggio, Piaggio Extrem / Extrem Lc, Piaggio Mc2 50, Piaggio Typhoon 50
Reference: 11 3668
Brand: Malossi
Malossi intake gasket pack for MBK EV 50 cc Malossi code: 11 3668 Malossi gasket for MBK EV 50. Replacement for fuel system 1610545 - 1610634 - 1610635: production discontinued.
Reference: 31 8573
Brand: Malossi
Malossi cast iron cylinder kit diameter 40 with pin diameter 12 Malossi code: 31 8573 Malossi cylinder kit for PEUGEOT BUXY 50 2T. Malossi cylinder kit for PEUGEOT BUXY RS 50 2T. Malossi cylinder kit for PEUGEOT ELYSEO 50 2T. Malossi cylinder kit for PEUGEOT LOOXOR 50 2T. Malossi cylinder kit for PEUGEOT METAL-X 50 2T. Malossi cylinder kit for PEUGEOT...
Reference: 143.705.012
Brand: POLINI
Polini reverso clutch shoe set. The Polini reverso minimoto clutch pads are specific and unique for the reverse engine. Polini Code: 143.705.012
Reference: 29 7714
Brand: Malossi
Malossi RACING spring set for original clutch Malossi code: 29 7714 RACING SPRING for ORIGINAL clutch Springs in pre-hardened carbon steel with high yield strength, protected by a high heat resistance paint in various colours. The different colouring highlights the load of each series of springs.
Reference: 204.0920
Brand: POLINI
Vespa piston 200cc 2t 68mm double band. Polini Code: 204.0920
Reference: 143.010.016
Brand: POLINI
Polini minimoto cylinder 143.010.016 Polini cylinder with air piston 5 ports d.36 COMPLETE WITH PISTON, BAND AND PIN. THE KIT DOES NOT INCLUDE THE HEAD.
Reference: 143.270.014
Brand: POLINI
Intake manifold diameter 14 mm in rubber 4.2 hp Polini minimoto engine. Polini Code: 143.270.014
Reference: 928.465.002
Brand: POLINI
Polini Thor 130/250 air filter box. Polini Code: 928.465.002
Reference: 5212544
Brand: Malossi
Automatic clutch not adjustable Malossi Maxi Fly clutch 5212544 Malossi code: 5212544 Automatic clutch not adjustable Maxi Fly clutch for clutch bell diameter 120 mm.
Reference: 01.FA.0017.L
Brand: Ohvale
Fork oil 500ml till 2019 Ohvale Code: 01.FA.0017.L
Reference: 61 7664
Brand: Malossi
Malossi X K belt for Cagiva City 50 2T 16.5x8x703 mm angle 30 Malossi code: 61 7664 Malossi belt for CAGIVA CITY 50 2T.
Reference: EK520ZVX3110
Brand: EK (Enuma Chain)
520 pitch motorcycle chain model EK520ZVX3110. EK Series ZVX3 chain Made up of 110 links with 520 pitch suitable for motorcycles with a maximum displacement of: 1200 cc combined with MLJ joint (Joint to be riveted).
Reference: 267209902
Brand: Wrapper
Fire Red wrapping can. Removable paint can Wrapper Red Fire 400 ml. Wrapping in spray, perfect for rims and tuning. How does the wrapping paint work? It is applied like a normal varnish, once dry it will become like a wrapping film, with the possibility of removing it at any time. CODE: 267209902 EAN: 5907547716737 SUPPLIER CODE: 400WRAPPER3000
Reference: 6215023BB
Brand: Malossi
Malossi brake pads Malossi code: 6215023BB Malossi brake pads for MBK SKYCRUISER 125 ie 4T LC euro 3. Front. Malossi brake pads for YAMAHA X MAX 125 ie 4T LC until 2008. Front. Malossi brake pads for YAMAHA X MAX 125 ie 4T LC from 2009 to 2013. Front. Malossi brake pads for YAMAHA X MAX 250 4T LC. Front. Malossi brake pads for YAMAHA X MAX 250 ie 4T LC...
Polini ignition for Piaggio Hello. Polini code: 171.0556
Polini ignition for Piaggio mopeds.
Compatible with Piaggio: BOXER - BRAVO - CBA - CIAO - ECO - GRILLO - SI.
For a product in which it is increasingly difficult to find original spare parts, Polini is also attentive to the details that can make the difference.
For this reason it features the 12 volt electronic ignition intended for all Piaggio mopeds with electronic ignition.
Assembly is simple and plug in, so no adjustments are needed.
Polini proposes the installation with two balancing flanges (to be purchased separately), which allow the ignition to be always balanced and without any vibration:
171.0679 (flange for mounting on engines with original crankshaft)
171.0680 (flange for mounting on motors with full frame motor shafts)
The rare earth magnet flywheel is lighter, with a lower mass of inertia than others on the market, and allows for a better housing than the competition. This means that the fan is larger and therefore allow for greater cooling.
Very important technical characteristics, which guarantee better acceleration, easier cooling and more gritty performance.