Xmotorstore Payments
Malossi Mhr Team crankshaft 5317822
Malossi code: 5317822
Malossi Mhr Team crankshaft with 13 mm diameter pin, 90 mm connecting rod, 44 mm stroke 5317822.
IMPROVEMENTS SINCE THE PREVIOUS VERSION:
10% more inertial mass.
Reinforced connecting rod to withstand higher loads.
Sprocket-side crankshaft increased driveshaft cross-sectional area by 10% resulting in increased strength.
Increased oil seal, drive side, from shaft diameter 19mm to 20mm, increasing shaft strength.
TECHNICAL FEATURES:
Half shaft material: 18 Ni Cr Mo5.
Half shafts and forged monolithic rotating masses.
Machining on high precision machine tools.
Five heat treatments on all components.
High surface finish to improve reliability.
Dynamic balancing up to 16,000 rpm.
Forged connecting rod in 18 Ni Cr Mo5 copper plated, coupled to shaft with high speed precision roller bearing.
N.B.: INTERVENTIONS ON THE CRANKCASE, BORING.
ONLY COMBINE WITH thermal units 3115385 - 3115883 (3113042/.T0 AFTER FITTING SPACER 0716345).
Malossi crankshaft for:
Malossi crankshaft for Aprilia sr (carb.) 50 2t lc 2004-> (piaggio).
Malossi crankshaft for Aprilia sr r (carb.) 50 2t lc (piaggio).
Malossi crankshaft for Aprilia sr r 50 2t lc euro 4 2018-> (piaggio ca81m).
Malossi crankshaft for Aprilia sr street 50 2t lc euro 2.
Malossi crankshaft for Derbi gp1 50 2t lc.
Malossi crankshaft for Derbi gp1 open 50 2t lc.
Malossi crankshaft for Derbi gp1 revolution 50 2t lc.
Malossi crankshaft for Gilera dna 50 2t lc.
Malossi crankshaft for Gilera runner 50 2t lc.
Malossi crankshaft for Gilera runner sp 50 2t lc <-2005.
Malossi crankshaft for Gilera runner sp 50 2t lc 2006-> (c451m).
Malossi crankshaft for Piaggio nrg 50 2t lc.
Malossi crankshaft for Piaggio nrg extreme 50 2t lc.
Malossi crankshaft for Piaggio nrg mc2 50 2t lc <-1997.
Malossi crankshaft for Piaggio nrg mc2 50 2t lc 1998->.
Malossi crankshaft for Piaggio nrg mc3 dd 50 2t lc.
Malossi crankshaft for Piaggio nrg power 50 2t lc euro 4 2018->2020 (ca71m).
Malossi crankshaft for Piaggio nrg power dd 50 2t lc.
Malossi crankshaft for Piaggio ntt 50 2t lc.
Malossi crankshaft for Piaggio quartz 50 2t lc.
Malossi crankshaft for Piaggio zip sp 50 2t lc <-2000.
Malossi crankshaft for Piaggio zip sp 50 2t lc 2001->.
Reference: 5317901
Brand: Malossi
Malossi complete connecting rod 5317901 Malossi code: 5317901 Malossi complete connecting rod with 90 mm axle distance and 13 mm diameter pin.
Reference: 4917551
Brand: Malossi
Complete Rc-One 94cc Malossi 4917551 engine for Piaggio engine Malossi code: 4917551 Complete Rc-One 94cc engine. Engine not assembled. For Piaggio engine, 10 wheel.
Reference: 4917550
Brand: Malossi
Complete Rc-One 94cc Malossi 4917550 engine for Piaggio engine Malossi code: 4917550 Complete Rc-One 94cc engine. Engine not assembled. For Piaggio engine, 12/13 wheel.
Reference: 4917546
Brand: Malossi
Complete Rc-One 94cc Malossi 4917546 engine for Yamaha engine Malossi code: 4917546 Complete Rc-One 94cc engine. Engine not assembled. For Yamaha engine.
Reference: 61 9948B
Brand: Malossi
Malossi pulley for H2O / oil pump Malossi code: 61 9948B
Reference: 6615509B
Brand: Malossi
Malossi needle cage d.13x17x17.7 Malossi code: 6615509B
Reference: 215.0446
Brand: POLINI
Polini 360 ° 25mm intake manifold sleeve for Minarelli. Polini Code: 215.0446
Reference: 6914574.w0
Brand: Malossi
Pair white grips diameter 30 with Malossi tribal logo - model without side closure Malossi code: 6914574.w0 Technical features: Top quality material. Resistant to atmospheric agents, UV rays and ozone. Reinforced internal flange to support the hand and neutralize vibrations. Smooth external surface to ensure greater safety. The UP writing on the external...
Reference: 4613170
Brand: Malossi
Malossi Twins rear shock absorber 4613170 Malossi code: 4613170 Malossi Twins rear shock absorber.
Reference: 5519524
Brand: Malossi
Malossi Force master 2.1 electronic control unit 5519524 for Yamaha Malossi code: 5519524 The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication...
Reference: 1612288
Brand: Malossi
Malossi Phbg 19 fuel system for Kymco Mxer 50cc 1612288 Malossi code 1612288 Application: Malossi fuel system for Kymco MXer 50 2T
Reference: 67 7818
Brand: Malossi
Malossi throttle valve control shaft for Honda 125 cc 67 7818 Malossi code: 67 7818
Reference: 01.ST.0100.L
Brand: Ohvale
Ohvale Gp-0 black Daytona upper triple tree. Black version for Daytona. Ohvale Code: 01.ST.0100.L
Reference: 143.630.002
Brand: POLINI
Rear wheel pin for Polini 910 minimoto. Polini code: 143.630.002 Rear wheel pin complete with spacers and nut, for Polini 910 minimoto.
Reference: 3214431
Brand: Malossi
Malossi 3214431 Power Exhaust Code: 3214431 In Malossi there was a strong desire to associate the glorious C.V.F. and to the reed valve fuel systems that have been the focal point of the evolution of steel-bodied scooters, a series of special mufflers. The new POWER EXHAUST, sports exhaust systems, recalculated, with a modern and gritty line, very...
Reference: 01.SB.0317.L
Brand: Ohvale
Ohvale Chain adjusting set Code: 01.SB.0317.L
Reference: 243.012
Brand: POLINI
Polini contrast spring for Piaggio Ciao Compatible with: PIAGGIO: BOSS - BOXER - BRAVO - CBA - HELLO - ECO - GRILLO - YES GILERA: CBA Polini Code: 243.012
Reference: 1111549
Brand: Malossi
Complete Malossi gasket kit for 40 diameter cylinder kit with detachable head (Minarelli engines) Malossi code: 1111549
Reference: 249.020
Brand: POLINI
Suzuki Burgman clutch, Malaguti Madison 400 diameter 150 mm Code: 249.020 Diameter: 150 mm Weight: 1820 gr. Application: Benelli, Benelli Velvet 400 Dusk, Malaguti, Malaguti Madison 400 K, Suzuki, Suzuki Burgman / Skywawe 400 X, K3, K6
Reference: 202.1423
Brand: POLINI
Polini front wheel pin for Piaggio and Vespa Ean code: 8054705118197 The Polini wheel pin axle designed for Piaggio and Vespa scooters has been designed to be perfectly complemented with the Polini suspension arm code 050.2660, but can also be applied to original levers. It is made of induction hardened carbon steel with high surface hardness and is...
Reference: 144.080.003
Brand: POLINI
Crankshaft for Polini and minicross minimotard, suitable for use with IDM flywheel. Code 144.080.003
Reference: EK520SRO6108
Brand: EK (Enuma Chain)
520 pitch motorcycle chain model EK520SRO6108. EK chain EK520SRO6108 SRO6 series Formed by 108 links with 520 pitch suitable for motorcycles with maximum displacement of: 650 cc combined with MLJ joint (Joint to be riveted).
Malossi Mhr Team crankshaft 5317822
Malossi code: 5317822
Malossi Mhr Team crankshaft with 13 mm diameter pin, 90 mm connecting rod, 44 mm stroke 5317822.
IMPROVEMENTS SINCE THE PREVIOUS VERSION:
10% more inertial mass.
Reinforced connecting rod to withstand higher loads.
Sprocket-side crankshaft increased driveshaft cross-sectional area by 10% resulting in increased strength.
Increased oil seal, drive side, from shaft diameter 19mm to 20mm, increasing shaft strength.
TECHNICAL FEATURES:
Half shaft material: 18 Ni Cr Mo5.
Half shafts and forged monolithic rotating masses.
Machining on high precision machine tools.
Five heat treatments on all components.
High surface finish to improve reliability.
Dynamic balancing up to 16,000 rpm.
Forged connecting rod in 18 Ni Cr Mo5 copper plated, coupled to shaft with high speed precision roller bearing.
N.B.: INTERVENTIONS ON THE CRANKCASE, BORING.
ONLY COMBINE WITH thermal units 3115385 - 3115883 (3113042/.T0 AFTER FITTING SPACER 0716345).
