- Reduced price
- New
Xmotorstore Payments
Malossi Injtronic 5517477B electronic control unit for Piaggio Liberty
Code: 5517477B
Malossi Injtronic electronic control unit for Malossi I - tech 4 stroke cylinder
The Injtronic engine control unit is the natural evolution of the original Piaggio system and allows the vehicle's performance to be increased. The use of a latest generation 32-bit microprocessor, in synergy with hardware designed according to the latest Automotive quality standards, forges the RACING DNA of this device. Designed to be plug & play, i.e. compatible with the original sensors and actuators, the control unit only needs a simple calibration of the throttle opening demand, to make the electronic engine control system synchronous. The calibrations and the refined listed plans allow to obtain a concrete performance increase of the engine.
Technical data
Carburation adjustment
Rev Limiter: 10,000 RPM
Mapping:
Malossi cylinder, original exhaust, 10,000 RPM limiter
Reference: 3117771
Brand: Malossi
Malossi cylinder diameter 49 mm in aluminum with pin diameter 13 mm 4-stroke 3117771 Code: 3117771 4 Stroke cylinder Material: primary aluminum alloy with a high content of tempered silicon, barrel with silicon carbide coating in a galvanic nickel matrix and cross-honed with two diamond passes with very tight tolerances. Processing: on high precision...
Reference: 215.0455
Brand: POLINI
Polini evolution P.R.E. engine intake manifold for Piaggio Zip 50 2t. Polini code: 215.0455 Polini evolution P.R.E. engine intake manifold Long Piaggio.
Reference: 210.0054
Brand: POLINI
PIAGGIO: APE 50 - APE 50 FL, FL2, FL3, RST MIX (6 Molle)VESPA: VESPA 50 2T SPECIAL - VESPA 50 2T PK - VESPA 50 2T XL cone 19 mm.
Reference: 3069.04
Brand: Domino
Handle control with aluminum clutch lever, choke lever, M10 mirror holder connection pitch 1.25 and detachable bracelet. Domino code: 3069.04 this throttle control is compatible for: Beta RR 50 clutch lever. Clutch lever Husqvarna TE-E 410 (00). Clutch lever Husqvarna TE-E 610 (00). Clutch lever Husqvarna TE E-LT 610 (00). Clutch lever Husqvarna TE E DUAL...
Reference: 01.SE.0007.L
Brand: Ohvale
Ohvale fuel tank ring nut Code: 01.SE.0007.L
Reference: 214.0103
Brand: POLINI
Antivibration support female-female M6 25x20 M.6x7 SHORE 65. Polini Code: 214.0103
Reference: Dm-D004
Brand: DM
Aluminum rear subframe for Ducati Panigale 749/999. Code: DM D004 Aluminum rear subframe for Ducati 749. Aluminum rear subframe for Ducati 999. High resistance aluminum tail, weight 1,220 kg aluminium natural. The product has been tested extensively but is not approved for road use. Product intended for competitions and with regards to road use, we...
Reference: 203.0015
Brand: POLINI
Polini filter box for Vespa 50S./125 ET3, Ape and Cp carburetor Polini filter box code 203.0015 Filter box for Cp and Vespa Shb, Shbc carburetors. No Vespa Pk
Reference: 5517191B
Brand: Malossi
Stator for Malossi power ignition 5517191B Code: 5517191B Stator for power ignition for Piaggio mopeds
Reference: 144.065.002
Brand: POLINI
Polini water pump oil seal 8x16x10
Reference: 01.TE.0030.L
Brand: Ohvale
Front engine mount 160 4s Ohvale 01.TE.0030.L
Reference: 174.0048
Brand: POLINI
Original Polini brake pads 47.2x50x7 mm Code 174.0048 These pads are applicable as a replacement to replace the original pads for: Derbi Boulevard 125 (Leader) brake pads, Derbi Boulevard 150 (Leader) brake pads, Derbi Boulevard 200 brake pads, Hm Cre 50 Six brake pads 2003/2005 Minarelli AM6, Pads Italjet Jet Set 125/150 (Leader) brake pads, Italjet Jet...
Reference: 1335.03-01
Brand: Domino
Domino racing throttle control for twin cylinder 1335.03-01 without grips. Racing throttle control for vintage twin cylinder. Support material: Aluminum Support finish: Painted Black colour Max Stroke: 65mm Rapidity: 2.1 °/mm Cable Type: 2 cables
Reference: 001002A02500
Brand: DM
Minibike front fender Dm. New 2024 version in "fiber" composite material. The new DM minibike mudguard is also compatible with previous versions, with 25 and 28 mm fork tubes.
Reference: 04.ST.0008.L
Brand: Ohvale
Ohvale GP-7 triple clamp height spacer. Triple clamp height spacer available in 3 sizes. SELECT THE DESIRED SIZE USING THE APPROPRIATE BUTTON.
Reference: 6618911B
Brand: Malossi
Ball bearing diameter 15x42x13 mm Malossi for Vespa 6618911B Malossi code: 6618911B.
Malossi Injtronic 5517477B electronic control unit for Piaggio Liberty
Code: 5517477B
Malossi Injtronic electronic control unit for Malossi I - tech 4 stroke cylinder
The Injtronic engine control unit is the natural evolution of the original Piaggio system and allows the vehicle's performance to be increased. The use of a latest generation 32-bit microprocessor, in synergy with hardware designed according to the latest Automotive quality standards, forges the RACING DNA of this device. Designed to be plug & play, i.e. compatible with the original sensors and actuators, the control unit only needs a simple calibration of the throttle opening demand, to make the electronic engine control system synchronous. The calibrations and the refined listed plans allow to obtain a concrete performance increase of the engine.
Technical data
Carburation adjustment
Rev Limiter: 10,000 RPM
Mapping:
Malossi cylinder, original exhaust, 10,000 RPM limiter