- Reduced price
- New
 
	        
    Xmotorstore Payments
 
				
				
					 
	         
          Malossi Force master 3 electronic control unit for injection vehicles 5519335
Malossi code: 5519335
The scooter's original control unit normally interfaces with the lambda probe installed on the muffler to analyze the fuel content and adjust the carburetion accordingly.
Force Master 3 intercepts the signal of the original probe, sending the values produced by a "virtual" lambda to the primary control unit and allowing dynamic and personalized management of the title at all times in which the original system would be programmed to analyze the results of the Lambda probe.
Here it finally becomes possible to manage the carburetion ratio between the idle zone and the transition zone, i.e. for all those rpm ranges and those conditions in which control over the operation of the lambda would prevent any intervention.
Thanks to a more advanced circuit, the electrical disturbances normally present on the throttle position signal have been eliminated, so as to allow the actual degree of opening to be identified more precisely and significantly improve response times, to the benefit of performance and engine efficiency.
HARDWARE AND INTERFACE
Alongside such refined hardware, a microprocessor with a very high calculation capacity could not be missing which would allow Malossi technicians to introduce new software strategies and exploit all the potential of Force Master 3.
Technical features:
-Carburetion adjustment
-± 14% at LOW / HIGH / MID
-Rev limiter: + 1000 RPM
-Speed limiter exclusion
-8 different mappings
-Lambda emulator
-Temperature range = -20°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <- 200mA
-Environmental protection = IP65
Malossi control unit for:
Malossi control unit for Piaggio MP3 HPE Sport 300 ie 4T LC euro 5 2021-> (TD21M)
Malossi control unit for Piaggio MP3 HPE 300 ie 4T LC euro 5 2021-> (TD21M)
Malossi control unit for Vespa GTS Super Racing Sixties HPE 300 ie 4T LC euro 5 2021->2022 (MD31M)
Malossi control unit for Vespa GTS Super HPE 300 ie 4T LC euro 4 2019->2020 (MA36M)
Malossi control unit for Vespa GTS Super HPE 300 ie 4T LC euro 5 2021->2022 (MD31M)
Malossi control unit for Vespa GTS Super Sport HPE 300 ie 4T LC euro 4 2019->2020 (MA36M)
Malossi control unit for Vespa GTS Super Sport HPE 300 ie 4T LC euro 5 2021->2022 (MD31M)
Malossi control unit for Vespa GTS Super Tech HPE 300 ie 4T LC euro 4 2019->2020 (MA36M)
Malossi control unit for Vespa GTS Super Tech HPE 300 ie 4T LC euro 5 2021->2022 (MD31M)
Malossi control unit for Vespa GTS Touring HPE 300 ie 4T LC euro 4 2019->2020 (MA36M)
Malossi control unit for Vespa GTS Touring HPE 300 ie 4T LC euro 5 2021->2022 (MD31M)
Malossi control unit for Vespa Sei Giorni HPE 300 ie 4T LC euro 4 2019->2020 (MA36M)
Malossi control unit for Vespa Sei Giorni HPE 300 ie 4T LC euro 5 2021->2022 (MD31M)
Malossi control unit for Vespa Sei Giorni II Edition HPE 300 ie 4T LC euro 5 2021->2022 (MD31M)
Malossi control unit for Vespa GTS HPE 300 ie 4T LC euro 4 2019->2020 (MA36M)
Malossi control unit for Vespa GTS HPE 300 ie 4T LC euro 5 2021->2022 (MD31M)
Malossi control unit for Vespa GTS HPE 300 ie 4T LC euro 5 2023-> (MD31M)
Malossi control unit for Vespa GTS Super HPE 300 ie 4T LC euro 5 2023-> (MD31M)
Malossi control unit for Vespa GTS Super Sport HPE 300 ie 4T LC euro 5 2023->
Malossi control unit for Vespa GTS Super Tech HPE 300 ie 4T LC euro 5 2023->
Malossi control unit for Vespa GTV HPE 300 ie 4T LC euro 5 2023->
Reference: 211.0214
Brand: POLINI
Polini cylinder head for Rotax 123 engine Polini cylinder head for: Aprilia, Aprilia Sport 125, Aprilia AF1 125, Aprilia Europa 125, Aprilia Pegaso 125, Aprilia Red rose 125, Aprilia RS 125, Aprilia RX 125 R, Aprilia Tuareg Rally 125, Aprilia Tuareg wind 125, Aprilia SX 125 , Polini, Rotax, Rotax 122, Rotax 123, Hm, Hm Derapage 125, Hm Cre 125
Reference: 5216516
Brand: Malossi
Clutch disc set 8 springs Mhr Malossi for Vespa 125 and 200 cc 2t 5216516 Malossi code: 5216516 Clutch disc set 8 springs Mhr Malossi for Vespa 125 and 200 cc 2t
Reference: 18162105
Brand: HJC
Hjc Rpha 1 Nomaro Helmet. The RPHA 1 was designed and developed after several years of focused effort and crucial feedback from the best world-class athletes in MotoGP. HJC engineers have worked to create a racing helmet that is truly worthy of the best racing circuits in the world. The RPHA 1 is the same model used by HJC's world-class athletes, in both...
Reference: 404609
Brand: T4TUNE
Front right indicator liberty 50 125 2t 4t 09-13 Piaggio Liberty 50 2T Moc 50 2T 2009 2015 Piaggio Liberty 50 4T Moc 50 4T 2009 2016 Piaggio Liberty 125 4T 2V EU3 125 4T - 2V 2009 2012 Piaggio Liberty 125 4T 3V IE EU3 125 4T - 3V 2013 2015 Piaggio Liberty 150 4T 3V IE LEM 150 4T - 3V 2013 2015 Code: 404609 Ean code: 9900000048648
Reference: MC8
Brand: HJC
Hjc F71 Eliz helmet. Advanced Fiberglass Composite Shell: Lightweight, with superior fit and comfort. Pinlock Ready HJ-38 VISOR: Offers 99% UV protection, anti-scratch coating; Two-way pivot ratchet ensures smooth ratchet movement and improved seal. Aerodynamic shell structure for extreme performance at maximum speeds. "ACS" Advanced Channeling...
Reference: 060023
Brand: T4TUNE
DELTA black approved motorcycle indicators with led Code: 060023 Ean: 9900000000998
Reference: 211.0275
Brand: POLINI
Head dome Yamaha Malaguti Aprilia diameter 47.6 mm. Polini code: 211.0275 Polini head dome for: Aprilia, Aprilia Area 51, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sonic 50, Aprilia Sr 50, Benelli, Benelli 491 50, Benelli K2 50, Beta, Beta Ark 50, Beta Eikon 50, Italjet, Italjet Dragster 50, Malaguti, Malaguti F 12 50, Malaguti F 15 50, Mbk, Mbk...
Reference: Gimoto KID
Brand: GIMOTO
Children's suit for Ohvale minimoto and minigp. The gimoto suit dedicated to children, for use on the track of minigp, ohvale, and minimoto. FEATURES : Cowhide (1.2 mm - 1.3 mm) Perforated version Stretch inserts in G-nforced ™ CE EN 1621-1 approved protectors on shoulders, elbows, patella-shin Composite protections on hips and kidneys Elasticated bellows...
Reference: 206.0190
Brand: POLINI
Polini segment for Vespa 125 diameter 61x1.5 mm 206.0190 Polini segment for: Vespa, Vespa 125, Polini
Reference: 6119260
Brand: Malossi
X Special belt Malossi strap 15.5x8.5x1049 mm angle 30 Malossi code: 6119260 Malossi belt for PIAGGIO BRAVO 50 2T ONLY for OVER RANGE 6119262.
Reference: FM10126-20
Brand: Formula
Complete left Formula brake pump. Formula Code: FM10126-20
Reference: MA203A21
Brand: CAPIT
Capit Maxima Vision 17 inch tire warmers. Motorcycle tire warmers, motard tire warmers. Temperature control with Tyrewarmer display, temperature visible on Tyrewarmer screen. it is possible to adjust the temperature directly from the Tyrewarmer screen in a range from 40 to 120 ° C (104 to 248 ° F) The plugs available are: - European type (EU - 220/230...
Reference: 11051KZ
Brand: Arrow
Arrow Euro 5 catalytic converter for 54mm 12/35 KW coupling. Arrow code: 11051KZ.
Reference: 504018
Brand: T4TUNE
280mm Nitro hydraulic shock absorber
Reference: 6111526B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR variator for scooter atv quad Malossi code: 6111526B
 
		            Malossi Force master 3 electronic control unit for injection vehicles 5519335
Malossi code: 5519335
The scooter's original control unit normally interfaces with the lambda probe installed on the muffler to analyze the fuel content and adjust the carburetion accordingly.
Force Master 3 intercepts the signal of the original probe, sending the values produced by a "virtual" lambda to the primary control unit and allowing dynamic and personalized management of the title at all times in which the original system would be programmed to analyze the results of the Lambda probe.
Here it finally becomes possible to manage the carburetion ratio between the idle zone and the transition zone, i.e. for all those rpm ranges and those conditions in which control over the operation of the lambda would prevent any intervention.
Thanks to a more advanced circuit, the electrical disturbances normally present on the throttle position signal have been eliminated, so as to allow the actual degree of opening to be identified more precisely and significantly improve response times, to the benefit of performance and engine efficiency.
HARDWARE AND INTERFACE
Alongside such refined hardware, a microprocessor with a very high calculation capacity could not be missing which would allow Malossi technicians to introduce new software strategies and exploit all the potential of Force Master 3.
Technical features:
-Carburetion adjustment
-± 14% at LOW / HIGH / MID
-Rev limiter: + 1000 RPM
-Speed limiter exclusion
-8 different mappings
-Lambda emulator
-Temperature range = -20°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <- 200mA
-Environmental protection = IP65