Xmotorstore Payments
Hjc Rpha 1 Nomaro Helmet. The RPHA 1 was designed and developed after several years of focused effort and crucial feedback from the best world-class athletes in MotoGP. HJC engineers have worked to create a racing helmet that is truly worthy of the best racing circuits in the world. The RPHA 1 is the same model used by HJC's world-class athletes, in both MotoGP and WorldSBK, and HJC is ready to finally launch it into full production with FIM homologation (FRHPhe-01) - safety certification.
RACING ACCESSORIES INCLUDED:
- TRANSPARENT AERODYNAMIC SPOILER.
- PINLOCK 120.
- RIPPLE FILM.
5 year guarantee.
Hjc Rpha 1 Nomaro Helmet. The RPHA 1 was designed and developed after several years of focused effort and crucial feedback from the best world-class athletes in MotoGP. HJC engineers have worked to create a racing helmet that is truly worthy of the best racing circuits in the world. The RPHA 1 is the same model used by HJC's world-class athletes, in both MotoGP and WorldSBK, and HJC is ready to finally launch it into full production with FIM homologation (FRHPhe-01) - safety certification.
RACING ACCESSORIES INCLUDED:
- TRANSPARENT AERODYNAMIC SPOILER.
- PINLOCK 120.
- RIPPLE FILM.
5 year guarantee.
Reference: 272.0000
Brand: POLINI
Polini pin retainer diameter 14x1.2 mm 1 spout. Polini Code: 272.0000
Reference: A2194
Brand: Alfano
2-input hub for Alfano 6 A2194. HUB with 2 inputs: speed plus magnetic 20cm. New model, this A2194 Hub replaces the old A2192 model. This HUB allows you to simultaneously connect an A2201 speed sensor (old model) or the A2203 (new model) + an A1302 magnetic sensor Note: this HUB is specially designed to connect to the green connector of the PROIIIevo,...
Reference: Lem-front-12-wheel
Brand: Lem motor
12 inch minicross Lem front wheel. Rim for 12-inch minicross, complete with rubber size 2.50-12 42j. The minicross rim is compatible both to replace the front wheel for the A12 model, and to transform the Lem A10 into A12.
Reference: TCM012
Brand: Tecnominimoto
TCM sintered minimoto jaws for minimoto clutch, the radius of the body mass increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has obtained excellent performance even on official bikes, effective in 80mm bells . First break-in at 7500 rpm.
Reference: Grf-tcm
Brand: XRACING
TCM minimoto adhesive graphics. Adhesive graphics for minimoto with TCM fairings, compatible with tcm fairings. The graphics are adhesive, no need to use glue, just apply it on the fairing. High quality materials, top of the industry. Customizable race number on request. Made to order: delivery 7/12 working days.
Reference: 254.0126
Brand: POLINI
Polini base gasket set for Minarelli AM6 cylinder thickness 0.1 0.15 0.2. Polini Code: 254.0126
Reference: 6116148
Brand: Malossi
X K belt Malossi strap 19.9x9.7x785 mm angle 30 Malossi code: 6116148 Malossi belt for PIAGGIO LIBERTY 3V 125 ie 4T euro 3. Malossi belt for PIAGGIO LIBERTY iGet 125 ie 4T euro 4 2017->2020. Malossi belt for PIAGGIO LIBERTY iGet 125 ie 4T euro 5 2021-> (MD41M). Malossi belt for PIAGGIO LIBERTY iGet 150 ie 4T euro 4 2017->2020. Malossi belt for...
Reference: 104134
Brand: Motul
Motul oil 300V Factory line off road 5W-40 4t 104134 (1 liter). High performance lubricant developed for the "Official Teams" and formulated to offer maximum power, better "grip" of the clutches together with exceptional engine and gearbox protection during the most extreme conditions of use. For 4-stroke engines with or without integrated gearbox, with...
Reference: 5518172
Brand: Malossi
Malossi Force Master 2 5518172 electronic control unit Code: 5518172 The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders. Carburation adjustment ± 20% at min/average/max Rev limiter : + 1000 RPM Original 10,000 - Malossi 11,000 4 different mappings : curve 0 : Malossi exhaust with...
Reference: 178.0204
Brand: POLINI
Polini front brake caliper support for Piaggio Zip Code : 178.0204 Ean code: 8054705001864 Application: Piaggio, Piaggio Zip 50 2T SP H2O from 2001, Piaggio Zip 50 2T SP H2O from 1996 to 2000 ATTENTION: It can only be mounted by removing the odometer.
Reference: 204.0810/D
Brand: POLINI
Piston Peugeot 100cc 55 mm selection D. Polini code: 204.0810 / D
Reference: 11 5648b
Brand: Malossi
Complete Malossi gasket kit for cylinder diameter 47 for original head for Aprilia 50 cc motorcycles Malossi code: 11 5648b Malossi gaskets for Aprilia AF1 50 2T LC. Spare part for Malossi cylinder 31 6092: production discontinued. Malossi gaskets for Aprilia ET Fire 50 2T LC. Spare part for Malossi cylinder 31 6092: production discontinued. Malossi...
Reference: 244.0127
Brand: POLINI
APRILIA: SCARABEO 50 STREET 2T RESTYLING Piaggio - SCARABEO 50 4T 2 Valvole RESTYLING Piaggio - SCARABEO 100 4T - SR 50 R, FACTORY (Piaggio) LC - SR 50 R, FACTORY INIEZIONE (Piaggio) - SCARABEO 50 4T 4 Valvole Piaggio dal 2009-> - SR 50 R, FACTORY (Piaggio) LC EURO 4DERBI: GP1 50 EURO2, OPEN, RACE dal 2005-> - GP1 50 2001-2003 - ATLANTIS 50 4T...
Reference: 200.0331
Brand: POLINI
Polini Original 2 muffler for Mmb Booster 50. Polini code: 200.0331 The Polini Original 2 muffler was designed to maintain the most original series appearance possible and is approved for the MBK Booster 50cc scooter, but can be adapted to all vertical Minarelli engines. However, beneath the surface, the heart of a racing soul beats, as it was designed to...
Reference: 6112959
Brand: Malossi
Malossi X K belt strap for scooter 17.8x10x778 mm angle 28 Malossi code: 6112959 Malossi belt for APRILIA SCARABEO 100 2T. Malossi belt for BENELLI K2 100 2T. Malossi belt for ITALJET MILLENNIUM 100 2T. Malossi belt for MBK BOOSTER 100 2T. Malossi belt for MBK NITRO 100 2T. Malossi belt for MBK OVETTO 100 2T. Malossi belt for YAMAHA AEROX 100 2T. Malossi...
Reference: 242.027
Brand: POLINI
Covers for Polini variator rollers. 242.026 COVERS FOR VARIAT. ROLLS D.19 242.027 COVERS FOR VARIAT. ROLLS D.15 242.028 COVERS FOR VARIAT. ROLLS D.16
Hjc Rpha 1 Nomaro Helmet. The RPHA 1 was designed and developed after several years of focused effort and crucial feedback from the best world-class athletes in MotoGP. HJC engineers have worked to create a racing helmet that is truly worthy of the best racing circuits in the world. The RPHA 1 is the same model used by HJC's world-class athletes, in both MotoGP and WorldSBK, and HJC is ready to finally launch it into full production with FIM homologation (FRHPhe-01) - safety certification.
RACING ACCESSORIES INCLUDED:
- TRANSPARENT AERODYNAMIC SPOILER.
- PINLOCK 120.
- RIPPLE FILM.
5 year guarantee.
